+ Reply to Thread
Results 1 to 9 of 9

Thread: Estate sale find, wondering authenticity and possible value

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    jglh555's Avatar
    Join Date
    Jul 2010
    Last On
    11-03-2010 @ 01:22 PM
    Posts
    4
    Local Date
    04-24-2024
    Local Time
    05:05 PM

    Estate sale find, wondering authenticity and possible value

    Ok, so I went to an estate sale and found a box of military and boy scout items and paid $50 for the box. I am fairly new to collecting military items and a veteran and come from a long line of military decendants. I know some and have done quite a bit of research. I want to know if my research is correct and to find out an approximate age from production date to last used in military, and approximate value if I did decide to sell any of the items. I have taken quite a few photos to help in ascertaining a value. I did some of my research through these forums and feel this would be one of the best places to ask. the link to the photos is here. I will be adding more as I upload them of other items, including an M1icon Helmet, M1 helmet liner, WW1? gas mask, douughboy helmet, Metal Canteen, and a few others. Please help me and let me know if my research is correct and any hints as to what to look for to further my beginning knowledge, and likely time frames

    ---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------

    Here is the link to the photos I have so far: Image hosting, free photo sharing video sharing at Photobucket
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    04-24-2024
    Local Time
    07:05 PM
    All I could find so far is what looks to me like an M-1 helmet with Captain's bars. These are correct for War Two, Korea, 'Nam and I wouldn't be shocked to find some still in US service. They are sure in use in about half of the rest of the world, that's for sure. Exactly WHEN these went into production and were issued, I don't know, but I would expect early 1942. I do know that US troops in the Philippine Campaign still were using the M-1917 'tin hat' helmet of general Britishicon type.

    C'mon! More pix! This is getting interesting now!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Moderator
    (Deceased January 2016)


    Harlan (Deceased)'s Avatar
    Join Date
    Mar 2009
    Last On
    01-04-2016 @ 04:42 PM
    Location
    Texas - USA
    Age
    65
    Posts
    3,727
    Real Name
    Harlan
    Local Date
    04-24-2024
    Local Time
    05:05 PM
    I used to collect US M-1 helmets and have done quite a bit of research. The front seam M-1 helmet is WWII issue 1942-1945 and the liner is WWII. The Helmet shell has almost certainly been repainted in more modern times and the captain's bars added later too.

    The vintage liner is probably worth more than the helmet shell. WWII liners are fragile and they have really dried up in the last few years.

    Check eBay sales for current prices, but keep in mind there are more fake M-1 helmets now than authentic helmets. The easiest way to tell a WWII M-1 helmet is the front seam rim. They did have a few rear seam helmets produced in 1945, but most were front seam. WWII helmet straps were sewn on and they they went to metal clips when helmet production resumed after the start of the Korean War, but there are many helmets with repro straps now.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    A. F Medic's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2019 @ 05:44 PM
    Location
    Erie Pa
    Posts
    1,141
    Local Date
    04-24-2024
    Local Time
    07:05 PM

    Estate sale

    Yo are correct about the firstone liner. Very good!

    Try this for more information....militaryheadgear.com/types/69

    Yours has a stainless steel rim which became a problem as it reflected light and made the person easier ti be seen by the enemy.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    jglh555's Avatar
    Join Date
    Jul 2010
    Last On
    11-03-2010 @ 01:22 PM
    Posts
    4
    Local Date
    04-24-2024
    Local Time
    05:05 PM
    Thread Starter

    Gas Mask pictures posted

    I have posted pictures of the gas mask, second liner, shortly I'll post more of other items links is : Gas Mask WWI or WWII pictures by jglh555 - Photobucket
    Last edited by jglh555; 07-12-2010 at 01:56 PM.

  8. #6
    Legacy Member lenb's Avatar
    Join Date
    Sep 2008
    Last On
    11-21-2021 @ 07:24 PM
    Location
    Seattle, WA USA
    Posts
    76
    Local Date
    04-24-2024
    Local Time
    03:05 PM
    The Doughboy helmet you have is the US M1917 model that was used by the US Army in WWI up through the early 30's. It was then replaced with the M1917A1 Kelly Helmet, which looks the same on the outside, but acutally has an improved leather liner and chinstrap assembly on the inside. The M1917A1 was the one that was used in the early days of WWII until the M1icon replaced it. Your helmet looks like it has been used very little, and the liner is in good shape. It seems to have been repainted on the outside, since the gloss finish over the cork particles seems a bit heavy. Still, this is a nice example, and I've even seen them go for over $150 at some auctions, so I'd say you did alright on your purchase.

    Len

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    jglh555's Avatar
    Join Date
    Jul 2010
    Last On
    11-03-2010 @ 01:22 PM
    Posts
    4
    Local Date
    04-24-2024
    Local Time
    05:05 PM
    Thread Starter

    gas mask

    with the gas mask, does anyone know what the cannister has inside? When I was in the Navy, we had the OBA (oxygen breathing apparatus) that had a candle thing that lit from the vapors of your breath, and I was wondering if it was the same type of cannister, or if this one is just a charcoal type. Another thing is I can't find an exact type of gas mask that it is, all references point to the MIVA1 being the bag for the mask, not the mask itself. Lastly, I was wondering what types of agents it would have protected against, and what were common gasses used in WWI and WWII? oh, and 1 more thing. Why did they revise the helmets to go from the wide brim to a nearly non existant brim. I would thing the wide brim of the doughboy gives more in the way of flying shrapnel, as opposed to the short brim of the M1icon. would it be more to0 protect against anything in the ground, or for when people fell (to protect more against neck/spinal injuries)
    Last edited by jglh555; 07-15-2010 at 12:23 PM.

  10. #8
    Legacy Member lenb's Avatar
    Join Date
    Sep 2008
    Last On
    11-21-2021 @ 07:24 PM
    Location
    Seattle, WA USA
    Posts
    76
    Local Date
    04-24-2024
    Local Time
    03:05 PM
    Don't know much about the gas mask, or even the vintage, but in WWI, the most common types of gas used was mustard gas and phosgene, both very nasty and deadly, and used often. They really never used poison gas in WWII, except perhaps in some small isolated incidents, so luckily the WWII masks probably never saw any use, and many were eventually discarded by the soldiers along the way.

    The helmet design also evolved in part due to lessons learned in WWI. The WWI helmet did a good job of protecting the wearer from overhead shrapnel, but since it sat up pretty high, the sides of the head and back of the neck received little protection, especially if the wearer was lying face down in a trench during a barrage. The Germanicon found that their helmet, with the large pot shape and tapered rear flange did a good job of this in WWI, so it only evolved slightly in WWII. The Americans used the lessons learned in WWI to develop the M1icon to give more head coverage overall than the WWI type. It seemed to work well, since we used it up into the 80's when we ended up with the new kevlar design that is in current use. Interestingly, it's shape has evolved to look much like the German helmets .

    Len

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    jglh555's Avatar
    Join Date
    Jul 2010
    Last On
    11-03-2010 @ 01:22 PM
    Posts
    4
    Local Date
    04-24-2024
    Local Time
    05:05 PM
    Thread Starter

    New finds

    ok, so I went to another estate sae and go a "bag of military stuff" it has pictures, has a small diary/journal, a typed "history of the USS Sutton" with a handwritten account on the back dealing with the capture of the U-234and another WWII gas mask. I'll be posting photos, transcripts, and more when I can get them up between work, work, and sleep.

+ Reply to Thread

Similar Threads

  1. estate find, Walter p38.
    By Chuckindenver in forum Other Military Service Pistols and Revolvers
    Replies: 10
    Last Post: 08-13-2010, 11:21 PM
  2. sling and carbine canvas bag authenticity check
    By davfink in forum M1/M2 Carbine
    Replies: 4
    Last Post: 03-29-2010, 04:56 PM
  3. M1 Carbine Estate Find Q's
    By sooperfly in forum M1/M2 Carbine
    Replies: 5
    Last Post: 05-24-2009, 08:35 AM
  4. estate find..
    By Chuckindenver in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 0
    Last Post: 04-04-2009, 08:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts