+ Reply to Thread
Results 1 to 8 of 8

Thread: T38..What to look for

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Jet Fixer's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 07:37 PM
    Posts
    71
    Local Date
    04-19-2024
    Local Time
    10:52 AM

    T38..What to look for

    I have a line on what appears to be a nice looking Type 38. Very few on line photos though, which bothers me a little, so I am thinking about a face to face to look at it in person. Problem is I know next to nothing about Japaneseicon T38s. Description says the bore is strong with a little greying at the base of the rifling, bolt is mis-matched (not unexpected) and there is no bolt cover. Also appears to be a cleaning rod, but don't know if it is right for the rifle. Question is, What are some of the things I should be looking for to decide if I should pull the trigger, or pull the plug on the deal? Also, what is a good price range to look at?

    Thanks
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    04-19-2024
    Local Time
    08:52 PM

    Very risky!

    Quote Originally Posted by Jet Fixer View Post
    bolt is mis-matched (not unexpected)
    It sounds like you are looking for a shooter. A collector would only go for a perfect "mum", properly matching parts, including bolt cover and cleaning rod, and ignore a rifle with a mismatched bolt. This is the major worry point. You need to search the forums for measuring "head clearance" (note head clearance, not headspace as measured with gauges). A mismatched bolt, especially if it is from a late-war run when things were going badly, can result in a clearance that is so huge that the rifle misfires.

    Quote Originally Posted by Jet Fixer View Post
    Description says the bore is strong with a little greying at the base of the rifling
    That is the typical seller blah-blah that means just about nothing. Rifling can be "strong" but ruined by pitting and bell-mouthing of the muzzle or a badly eroded throat. Greying can mean that the bore is "leaded" and just needs a very good clean. What is underneath the grey can be shiny steel or rust pits. You can't tell until you have cleaned the bore. But if a seller is too lazy to clean the bore himself, which would make it more desirable (IF it is a good bore underneath) ask yourself "why?". Maybe he would rather not know what is beneath the grey?

    This sounds like the kind of rifle that is very risky if you cannot inspect it yourself and make the proper judgements. If it is, for instance, being offered through an on-line auction and personal visual inspection is impossible, do not pay more than a wall-hanger price. Because there is a very good chance that that is what it is!


    Patrick

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    303Nut's Avatar
    Join Date
    Dec 2006
    Last On
    08-07-2017 @ 04:30 PM
    Location
    North Carolina
    Posts
    95
    Local Date
    04-19-2024
    Local Time
    02:52 PM
    You say you know very little about the type 38 so you need to be very careful on this one. Do as much research as you can before you buy.

  6. #4
    Legacy Member Jet Fixer's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 07:37 PM
    Posts
    71
    Local Date
    04-19-2024
    Local Time
    10:52 AM
    Thread Starter
    Thanks for the info. The seller has not contacted me about a FTF so that in itself is a red flag for me. Plus the fact that he says he doesn't have any other pictures. Time to pass on that one.

  7. Thank You to Jet Fixer For This Useful Post:


  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Doug Rammel's Avatar
    Join Date
    Mar 2009
    Last On
    01-15-2015 @ 11:22 PM
    Location
    SW Ohio
    Posts
    141
    Local Date
    04-19-2024
    Local Time
    01:52 PM
    You say the bolt is mismatched which is to be expected. I find that the bolts on Jap rifles always match. I'd pass on this one. At the last Ohio gun collectors show. I checked about a dozen rifles and all matched. Ended up with a nice T-38 for 150.

  9. #6
    Legacy Member Jet Fixer's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 07:37 PM
    Posts
    71
    Local Date
    04-19-2024
    Local Time
    10:52 AM
    Thread Starter
    The seller won't do a FTF meeting so I can look at it. That about says it all. Time to run, not walk, away from that deal.

  10. #7
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    04-19-2024
    Local Time
    08:52 PM
    Quote Originally Posted by Jet Fixer View Post
    Time to run, not walk, away from that deal.
    Good decision. BTW, what's an FTF?


    Patrick

  11. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    303Nut's Avatar
    Join Date
    Dec 2006
    Last On
    08-07-2017 @ 04:30 PM
    Location
    North Carolina
    Posts
    95
    Local Date
    04-19-2024
    Local Time
    02:52 PM
    Quote Originally Posted by Patrick Chadwick View Post
    Good decision. BTW, what's an FTF?


    Patrick
    FTF=Face to Face...

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts