+ Reply to Thread
Results 1 to 10 of 10

Thread: 7.62mm barrel question, possible L8?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-29-2024
    Local Time
    02:41 PM

    7.62mm barrel question, possible L8?

    Bought a sporterized No4 Mk2, not so long back for a parts rifle, the bore was rusted through but it had a decent body and an original 7.62mm magazine, the barrel which had not been cut down still had its bayonet lugs etc which I would of relined to .22

    Further inspection when I picked it up and after a good clean of the bore it came up well, no marks on the barrel except an 8 on the knox form, also no spacer fitted so would say its not a sterling barrel, anyone any idea,s of make etc ?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by bigduke6; 02-19-2012 at 07:28 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-29-2024
    Local Time
    04:41 PM
    Was it cut down by less than an inch if the bayonet lugs were still present? No doubt that it was a Charnwood conversion if what you say bears out

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-29-2024
    Local Time
    02:41 PM
    Thread Starter
    Quote Originally Posted by Peter Laidlericon View Post
    Was it cut down by less than an inch if the bayonet lugs were still present? No doubt that it was a Charnwood conversion if what you say bears out
    Peter,

    Its full lengh barrel, same contour as a No4 .303, mag is an original 7.62mm (not a charnwood)

  6. #4
    Legacy Member XL39E1's Avatar
    Join Date
    Apr 2011
    Last On
    Yesterday @ 02:11 PM
    Location
    Southern England
    Posts
    156
    Local Date
    03-29-2024
    Local Time
    02:41 PM
    Original Enfield L8 barrels have flats on either side of the barrel by the Knox form, this was for the new breeching tools Enfield were going to use! There were other makers of 7.62mm barrels, A.J.Parker, Sterling, Delacour(Belgiumicon) and possibly Parker Hale! All with bayonet lugs unlike the Canadianicon barrels without lugs

  7. #5
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-29-2024
    Local Time
    04:41 PM
    We could discuss this further but the 1965 series production L8's proposed to 'fill-the-gap' were going to use Belgian 'Cannons' barrels who couldn't supply the quantity or the quality. Canadaicon could - and did but by then, India had told the UKicon Government, in as many words '....... No Sterlings, No 7.62mm No4's either........'

    The what were called 'spanner' barrels (with two flats) were a simplified barrel that could be fitted without the need for the more complicated part of the breeching up set. The drawings exist for .303" 'spanner' barrels with breeching up washers too............

  8. The Following 2 Members Say Thank You to Peter Laidler For This Useful Post:


  9. #6
    Advisory Panel
    Warren's Avatar
    Join Date
    Dec 2006
    Last On
    03-23-2024 @ 12:55 PM
    Posts
    1,192
    Local Date
    03-29-2024
    Local Time
    10:41 AM
    If the barrel is No.4 original contour with no markings of any sort and the bayonet lugs, there is a good chance it is a Canadianicon made barrel. I did a photo essay of the different types of barrels here some time ago and will see if I can find the photo used. The Canadian DCRA barrels did not have a bayonet lug but will be marked with 7.62 and the C with A on the muzzle. The barrels with the bayonet lugs in the white as the originally surfaced out of CA have No markings. There was also another Canadian barrel with a much heavier profile but as I have only ever seen the one I have, I don't think it was a production run. I'll have to check it as the heavy barrel has surfaced during a major clean up and finding all sorts of kit that I never knew I had....

  10. #7
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-29-2024
    Local Time
    02:41 PM
    Thread Starter
    Some pics of the barrel, and how it looked.
    Last pic shows the bits ready to fit (the butt and fore-end are NOS, so will have dig out Peters instructions on fitting them).





  11. #8
    Advisory Panel Thunderbox's Avatar
    Join Date
    Dec 2008
    Last On
    01-10-2022 @ 02:07 PM
    Posts
    1,150
    Local Date
    03-29-2024
    Local Time
    02:41 PM
    I've got a similar barrel, unmarked except for a ".308" stamped on the flat where yours has an "8".

    I assume its a civilian trade barrel, possibly Belgian.

  12. #9
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-29-2024
    Local Time
    02:41 PM
    I was sent two near new barrels from a friend in Canadaicon a few years ago. They possess lugs & appear to have a radial recess machined into the back face (breeching up face). There are few markings other than a rather odd shape that looks like an asymmetrical star together with a three digit number starting with a six, in both cases. Can't remember the exact numbers but something like 639 & 642. Does this ring any bells with anyone? I hope they're Canadian as I have plans for them if they are....

    ATB

  13. The Following 2 Members Say Thank You to Roger Payne For This Useful Post:


  14. #10
    Legacy Member MJ1's Avatar
    Join Date
    Sep 2007
    Last On
    02-05-2024 @ 03:28 PM
    Location
    Guanacaste
    Posts
    735
    Local Date
    03-29-2024
    Local Time
    06:41 AM
    Interesting post. Thanks to all.

    ..MJ..

    My .308 compared to a new 303
    MJ, don't take this personally, but that's crap.
    muffett.2008

+ Reply to Thread

Similar Threads

  1. Another barrel ID question
    By blackwinch in forum M1 Garand/M14/M1A Rifles
    Replies: 0
    Last Post: 02-16-2011, 11:20 PM
  2. Mod 12 barrel question
    By tnraines in forum Military Shotguns
    Replies: 2
    Last Post: 01-12-2011, 11:20 AM
  3. .303 to 7.62mm conversion question
    By Longshaor in forum The Bren LMG (Light Machine Gun)
    Replies: 4
    Last Post: 05-20-2010, 08:38 PM
  4. Sg 3,403,xxx barrel question
    By painter777 in forum M1/M2 Carbine
    Replies: 2
    Last Post: 09-17-2009, 08:13 AM
  5. IP Barrel Question
    By f15guy71 in forum M1/M2 Carbine
    Replies: 2
    Last Post: 07-26-2009, 10:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks