+ Reply to Thread
Results 1 to 2 of 2

Thread: Lithgow No.1 bolthead issue

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member newcastle's Avatar
    Join Date
    Mar 2009
    Last On
    07-15-2023 @ 02:48 PM
    Posts
    916
    Local Date
    03-28-2024
    Local Time
    02:30 AM

    Lithgow No.1 bolthead issue

    Just got a No.1 1942 Lithgowicon,matching , good condition wood and really nice bore not much wear om the metal at all. Weird thing though. The bolt head has a lot of play in it and will flip up over the guide rail if pushed. Have not taken it apart to examine yet but wondered if a) that is unsafe and b) how it would happen if not through wear n tear and a lot of shooting.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    03-28-2024
    Local Time
    08:30 PM
    Quote Originally Posted by newcastle View Post
    Just got a No.1 1942 Lithgowicon,matching , good condition wood and really nice bore not much wear om the metal at all. Weird thing though. The bolt head has a lot of play in it and will flip up over the guide rail if pushed. Have not taken it apart to examine yet but wondered if a) that is unsafe and b) how it would happen if not through wear n tear and a lot of shooting.
    Check it all over for DP marks. Just because it looks nice, doesn't mean it hasn't been downgraded.

    Ok, no marks? There are a few possibilities... a common one is the receiver has been twisted during an attempt at removing the barrel with the wrong tools. Another one is wear tom the bolthead itself, making bit sloppy in the thread and able to go sideways enough to disengage from the rail... but another I have struck recently with an all matching rifle is wear to the bolt body. I had one here a few weeks ago that had a matching bolt5 and barrel... so nothing had been moved or removed.. but he head fell out of the rail anywhere along the bolt's travel. I tried about a dozen other bolts in it and only found one other that did it too.

    Answer.. try a few bolts and if one fixes it, then follow the instructions for fitting a new bolt and away you go. Stick the original one away so it can still be all matching, or jut leave it as is and tag it not to be fired. Mind you, even if you could close the bolt with the head disengaged, it shouldn't fire anyway. The mechanical safety on the cocking piece should not let the striker fall with the bolthead over rotated enough to be out.

  4. Thank You to Son For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
+ Reply to Thread

Similar Threads

  1. Problem with bolthead binding on guide rail
    By Morning Wood in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 02-20-2012, 02:00 AM
  2. Correct bolthead for 1941 Lithgow No. 1 Mk. III* SMLE?
    By rscaife in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 12-08-2011, 07:44 PM
  3. What to do about headspace after #4 bolthead?
    By Timmer in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 40
    Last Post: 05-04-2009, 12:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks