+ Reply to Thread
Results 1 to 3 of 3

Thread: 300 Yard group shooting with time limit

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Entry Level's Avatar
    Join Date
    May 2011
    Last On
    01-24-2024 @ 11:47 AM
    Location
    Carpinteria, Ca
    Posts
    101
    Local Date
    04-24-2024
    Local Time
    04:13 PM

    300 Yard group shooting with time limit

    I went to the range today to test 2 different loads for the Gibbs 03A4 and 2 different loads for the "T" Enfield. Gave myself a sighter to be sure I was on paper then 10 shots with 20 second limit for each. This is the time limit for the Vintage match. Since I was spotting myself I tried to hold the same to check group size. The black target is 18 inches which approximates the proper 300 yard target for the 8 ring, The orange paster is 3 inches square. The first target is a 155 grain Hornady FMJ in the Gibbs.The second is a 178 gr. Hornady AMax in the Gibbs. The 3rd is a 174 SMK in the Enfield and the 4th is a 180 grain spitzer in the Enfield. The x ring on the 300 yard target is 3 inches so if I can move the groups to center they could score well. Getting to the range was time well spent and seeing how well the rifles shot was a bonus. Next chance I get will be to move to 600 yards.




    Attachment 32060Attachment 32061Attachment 32062Attachment 32063
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 4 Members Say Thank You to Entry Level For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member rugersworld's Avatar
    Join Date
    Apr 2009
    Last On
    11-18-2021 @ 02:57 PM
    Location
    Sacramento
    Posts
    99
    Local Date
    04-24-2024
    Local Time
    04:13 PM
    How is the fit and finish on the Gibbs rifle? Are you concerned that it is a converted drill rifle while shooting it?

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Entry Level's Avatar
    Join Date
    May 2011
    Last On
    01-24-2024 @ 11:47 AM
    Location
    Carpinteria, Ca
    Posts
    101
    Local Date
    04-24-2024
    Local Time
    04:13 PM
    Thread Starter
    I don't have concerns safety wise. The mag cutoff works well, the finish of the receiver is ok. It isn't a custom rifle. the barrel is new so no worry about chamber. Usual caution reloading. Have shot LC Match . I don't use the brass that must be reamed to reload. I reload Remington brass, LC Match brass and just got order of PRVI new brass to try. My problem is older eyes and 2.5x mag on scope. The wood is clean, the inletting of action is in excess, could be bedded but then wouldn't conform to Vintage Rules. The scope dials back to 0 so no problem there. I will try and dial to 1000 next time at range. i will need probably 40 clicks, 20 moa from 600 to get there. I like the rifle fun to shoot. I chronied my 150 FMJ load with 55 gr. H-4350 at 2805 and it was comfortable to shoot. Will look for 2700 approx with 168 I plan to load next. From reading the earlier posts the gear has been improved from first issues. I have to remember to shoot the Gibbs first then switch to 12x42 NXS or Valdada or eyes rebel. A 7/8 inch tube is very different than 35mm.

  7. Thank You to Entry Level For This Useful Post:


+ Reply to Thread

Similar Threads

  1. 1,000 Yard Shooting (M1D Garand Sniper Rifle)
    By Badger in forum M1 Garand/M14/M1A Rifles
    Replies: 48
    Last Post: 09-21-2010, 07:57 PM
  2. 640 Yard Shooting (1943 1903a3 Rifle)
    By Badger in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 0
    Last Post: 09-09-2009, 11:03 AM
  3. 640 Yard Shooting (1943 1903a3 Rifle)
    By Badger in forum Range Reports - Show us how good you are!
    Replies: 0
    Last Post: 09-09-2009, 10:59 AM
  4. 640 Yard Shooting (1943 1903a3 Rifle)
    By Badger in forum The Screening Room
    Replies: 0
    Last Post: 09-09-2009, 10:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts