+ Reply to Thread
Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 42

Thread: Bren semi auto build - USA

Click here to increase the font size Click here to reduce the font size
  1. #11
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-17-2024 @ 02:10 PM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,505
    Real Name
    Peter Laidler
    Local Date
    03-19-2024
    Local Time
    09:34 AM
    We have a saying here that '.......you could spoil the ship for a hap'worth of tar'. Why not just ask the welder in post#5 to weld it. It's clear that he has the know-how plus the jigs, fixtures and fittings that he's used successfully before. I'm sure that he's your man..........

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Legacy Member ActionYobbo's Avatar
    Join Date
    Feb 2012
    Last On
    02-23-2024 @ 01:28 PM
    Location
    Flippin Arky
    Posts
    417
    Local Date
    03-19-2024
    Local Time
    03:34 AM
    Quote Originally Posted by Peter Laidler View Post
    We have a saying here that '.......you could spoil the ship for a hap'worth of tar'. Why not just ask the welder in post#5 to weld it. It's clear that he has the know-how plus the jigs, fixtures and fittings that he's used successfully before. I'm sure that he's your man..........
    that would be easy with out the rules, regulations, licences and the cost
    for what you will pay to have it welded you could almost buy 3 more kits
    I have welded a few and its not that hard but then they (other builders) say that the bren is the hardest kit to build
    When I say its not that hard understand that I have years of welding experience. this is not something to learn to weld on.
    Just remember to do all your semi auto modifications before you do any welding together of the receiver pieces...
    thats cut the carrier rails, weld up the corresponding track in the receiver, weld the selector stop on the lower, weld the denial pins into the center section, cut the bolt and cut the piston post thats not all, there is more. decide what version you are going to copy and modify your lower acordingly. have fun and good luck

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-19-2024
    Local Time
    02:34 AM
    Garth,
    Looking good. If you don't mind, someone should post some of the SA parts that you get with the kit from MGS.
    I am thinking about doing one as .308 due to the "cheap" ammo. HOwever, I seem to be starting to get rifles in .303... so I may do the next as original caliber.
    Great rifles and shooting examples are a nice tribute to the sacrifice made by the troops who used them.

    If you are going to build a jig, let me know. I am looking for help doing that also, and may be able to help with the material cost... If you don't mind doing the machine work....

  6. #14
    FREE MEMBER
    NO Posting or PM's Allowed
    camerl2009's Avatar
    Join Date
    Jul 2010
    Last On
    04-08-2013 @ 03:16 PM
    Location
    southern ontario
    Posts
    22
    Local Date
    03-19-2024
    Local Time
    03:34 AM
    Quote Originally Posted by Midmichigun View Post
    Garth,
    Looking good. If you don't mind, someone should post some of the SA parts that you get with the kit from MGS.
    I am thinking about doing one as .308 due to the "cheap" ammo. HOwever, I seem to be starting to get rifles in .303... so I may do the next as original caliber.
    Great rifles and shooting examples are a nice tribute to the sacrifice made by the troops who used them.

    If you are going to build a jig, let me know. I am looking for help doing that also, and may be able to help with the material cost... If you don't mind doing the machine work....
    .308 would need some major work the common thing to do is convert it to 7.62x54r thats what id do .303 brass is not cheap anymore and just about anything you find on the range floor is scrap(they are ok for converting to .410)

  7. #15
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    03-19-2024
    Local Time
    02:34 AM
    Thread Starter
    Projectguns does not work on kits with the cuts done to my receiver, it will require additional machining after welding.

    After talking with a formerly licensed firearms manufacturer about the legality of manufacturing a firearm for personal use, I have decided to go the safe route and submit form atf-f-5320-1 Application to Make and Register a Firearm. Primarily due to the "non-sporting semi-auto from imported parts" argument. He is no longer licensed after his company was raided by the ATF, he was cleared of any charges, but some others were not so fortunate. He warned me the ATF loves grey areas, and to get written approval. The following is from the ATF website:

    Q: Does the GCA prohibit anyone from making a handgun, shotgun or rifle?

    With certain exceptions a firearm may be made by a non-licensee provided it is not for sale and the maker is not prohibited from possessing firearms. However, a person is prohibited from assembling a non-sporting semi-automatic rifle or non-sporting shotgun from imported parts. In addition, the making of an NFA firearm requires a tax payment and approval by ATF. An application to make a machine gun will not be approved unless documentation is submitted showing that the firearm is being made for a Federal or State agency.

    [18 U.S.C. 922(o) and (r), 26 U.S.C. 5822, 27 CFR 478.39, 479.62 and 479.105]

    I will post pictures of the semi auto parts later this week. I figure I have 6 months to learn to weld while waiting for approval. Again, I may not have to jump through the hoops, but would rather spend $200 than risk $10k and 10 years.

  8. #16
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-19-2024
    Local Time
    02:34 AM
    Garthok,
    This should be interesting on what you get back.
    I understand the argument as to 922r, and I believe to counter this is to us a certain amount of US parts. I belive the rewelded receiver will count as 1 part... along with the piston... etc.. etc...

  9. #17
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    03-19-2024
    Local Time
    02:34 AM
    Thread Starter

    Semi auto and compliance parts

    Bottom view of bolt showing extended firing pin
    Attachment 34248
    New striker/hammer
    Attachment 34256
    showing fit with modified bolt carrier
    Attachment 34255
    Bottom of bolt carrier modified to never catch in open bolt position
    Attachment 34254
    Side view of modification
    Attachment 34253
    Magazine follower, bottom plate and trigger. Compliance parts.
    Attachment 34252
    New gas piston another US made part
    Attachment 34251
    rails shortened to allow install in semi receiver
    Attachment 34250
    channel cut in old hammer to allow passage of extended firing pin
    Attachment 34249
    channel cut in front of bolt to allow install in semi receiver
    Attachment 34257

  10. #18
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    03-19-2024
    Local Time
    02:34 AM
    Thread Starter
    This is the part that seems a bit confusing, these are my assumptions of how this works. if anybody comes across actual instructions for installation please post here.
    Not all of the parts shown here are required all the time.
    Attachment 34260
    The hammer has recesses for two springs and their guides
    Attachment 34259
    The top three parts shown separate are a reliability addition to reduce binding when the hammer moves forward and gives it more energy to solve light primer hits. Again I'm assuming as I have not seen these in other builds.
    Attachment 34258
    Showing a rough guesstimate of how the parts are supposed to fit together
    Attachment 34261

    The guide/spring/tube at the top require drilling a hole in the stock to install.
    Most of this is compiled from a post I found once and cannot find again.

  11. #19
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    03-19-2024
    Local Time
    02:34 AM
    Thread Starter
    Ignore the previous post, all of the parts are required for this version, the big spring replaces the existing bolt carrier spring in the stock, the small spring, plunger, tube are used as the hammer spring to drive it forward.

  12. #20
    FREE MEMBER
    NO Posting or PM's Allowed
    CGinCT's Avatar
    Join Date
    Jul 2012
    Last On
    10-31-2014 @ 11:03 AM
    Location
    CT USA
    Posts
    2
    Local Date
    03-19-2024
    Local Time
    03:34 AM
    You do not have to file a Form 1 (and pay for the $200 tax stamp) with BATFE to make your BREN. The Form 1 is for "making" an NFA weapon such as a SBR, SBS or silencer. Notice the term "making". The Form 1 allows you to "make" one (1) NFA weapon that is listed on the form. Making is for your personal use. Manufacturing is a completely different beast and it requires licenses from BATFE. These licenses allow you to "Manufacture" as many wepons as you want and they can be sold like any other firearm.

    Regarding your BREN build the only things you have to make sure of is that your finished weapon is semi-auto only and it complies with 922r in order to make a "non-sporting semi-auto from imported parts". There are twenty (20) imported parts as determined by the powers that be listed in 922r. You can make a semi-auto rifle from an imported parts kit as long as there are NO MORE than ten (10) of the imported parts used in making the rifle. That means you must replace enough imported parts with US made parts in your build to bring the total of foreign parts down to 10 or less. Some firearms do not have all of the 20 parts listed in 922r. An FAL, for instance, only needs seven (7) US made parts because there are only 17 of the 922r parts in the firearm to begin with. The BREN has no trunion because it is an integral part of the receiver and it is not a separate part.

    A listing of the 922r parts for a number of firearms can be found here:
    Section 922(r) Parts Count

    Unfortunately, the BREN is not one of the firearms listed.

    I hope this helps.

    Chris
    aka CGinCT

+ Reply to Thread
Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast

Similar Threads

  1. Semi Auto .303
    By RJW NZ in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 29
    Last Post: 12-01-2013, 07:40 PM
  2. semi-auto registed bren gun
    By britrecko in forum The Semi-Automatic Bren LMG (Light Machine Gun)
    Replies: 16
    Last Post: 01-17-2012, 01:01 PM
  3. Why did the USA go semi-auto when others did not?
    By Amsdorf in forum M1 Garand/M14/M1A Rifles
    Replies: 35
    Last Post: 11-24-2011, 06:49 PM
  4. Semi-auto M14?
    By Stevo in forum M1 Garand/M14/M1A Rifles
    Replies: 25
    Last Post: 06-19-2011, 03:11 PM
  5. Johnson semi-auto
    By bill1 in forum Milsurps General Discussion Forum
    Replies: 13
    Last Post: 04-24-2007, 05:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks