+ Reply to Thread
Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 41

Thread: Photograph of rare Canadian Telescopic Rifles from WWII (Expert opinions wanted)

Click here to increase the font size Click here to reduce the font size
  1. #11
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    07:09 PM
    To be honest, there's not much else that can be said is there. Great period photo but the rifles except 5th man from left are odd-balls (Non standard No4T's probably being tested against the standard No4T that is the control sample.

    How accurately the rifle with the shortened fore-end shoots can only be guessed at as we KNOW what happens when you cut the fore-end off! The Lymans.........., well............, anyway let's pass! The Britishicon certainly gave it the thumbs down in no uncertain terms. The eye relief on the two on the right (No67's?) looks too short to me too.

    The snow smocks are interesting. We used to have a similar thing here, but camouflaged, called a 'smocks, windproof' and were issued up until the mid 70's and was well liked by the snipers over the suggested paratroopers smocks as it was longer, windproof of course and if washed in a water repellent wash, was sort of waterproof.
    There, some comments to get your teeth into

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-28-2024
    Local Time
    05:09 PM
    It's a remarkable photo indeed but I couldn't add anything to what others have said. I think cheesycigar's inital assessment is likely to be accurate. If only someone could contact any of those guys who might still be living.....

    ATB

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,941
    Real Name
    Doug
    Local Date
    03-28-2024
    Local Time
    01:09 PM
    My Videos in Video Club
    12
    Quote Originally Posted by CheesyCigar View Post
    The 5th man from the left appears to be holding a plain-jane No.4 telescopic rifle. (unless someone can spot something out of the ordinary)

    The man 6th from the left is holding a cut down rifle. I am almost certain that it is (or is closely related to) this rifle: 1943-44 Enfield No.4 Mk1* Experimental Long Branch 'Scout' Sniper Rifle

    Like the rifle listed in the Knowledge Libraryicon, it has a cut-down stock, a totally new buttstock (rollover cheekpiece and a rubber butt), and no charger bridge. From this angle, it's difficult to tell whether or not it's fitted with the windmill-style 4 position backsight (which was mounted on the left side of the receiver) As well, this rifle mounts a different scope: the C No.32 Mk 4 (C No.67 Mk I) onto what should be a Griffin & Howe mount. (which was what the type was configured with. I, however, might be incorrect. But from I can see, it appears to be a match)
    Great quality pic…..

    Thanks for posting it for everyone to share …

    I believe your conclusions about that specific rifle are correct. I have enlarged an area of the pic where you can see through to the other side and you can just make out the windmill off-set rear sight, plus when you look at the from sight area, you can clearly see how it swivels outwards to the left, in order to line up with the windmill sight.

    Attachment 34490 (Click PIC to Enlarge) Attachment 34491

    Other than the butt, which in our MKLicon example is a standard looking No.4 butt with the cheekpiece, it does appear that the one you've referred to in your grandfather's pic is also one of the 10 experimental rifles produced at Long Branch.

    Although you can't tell from the angle of the barrel whether the rifle in the pic has a bayonet lug, if it did, then like the one in the library entry, it would be just 1 of 4 (possibly 3 if US bayonet lug) produced like this. Extract… "Four of these were to accept the No.4 spike bayonet, three were described as "semi-long forend and US bayonet" while the last three were not setup to accept any bayonet."

    (Click PIC to Enlarge)

    Regards,
    Doug

  6. The Following 4 Members Say Thank You to Badger For This Useful Post:


  7. #14
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    07:09 PM
    It's also a thought that as you might recall from 105 and 120mm tank barrels, the fore-end also acts as a thermal sleeve for the No4 barrel. Seeing that it's pretty cold there, I wonder just how a cold breeze across the barrel would affect accuracy. It certainly did with tank barrels

  8. Thank You to Peter Laidler For This Useful Post:


  9. #15
    FREE MEMBER
    NO Posting or PM's Allowed
    CheesyCigar's Avatar
    Join Date
    Oct 2011
    Last On
    @
    Location
    .
    Posts
    6
    Local Date
    03-28-2024
    Local Time
    01:09 PM
    Thread Starter
    I'd like to thank everyone for their responses.

    Just out of curiosity; does anyone have any figures for the rifles that had sporty buttstocks? How many were made? Did it ever make it beyond the testing fazes? How many were fitted with the No.67 scope?
    Last edited by CheesyCigar; 06-13-2012 at 03:21 PM.

  10. #16
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    07:09 PM
    No idea here but we have one of the butts. It would be an absolute doddle to reproduce one on a copy lathe connected to a shadowgraph. Simplified I know, but the engineers will see what I'm getting at

  11. #17
    FREE MEMBER
    NO Posting or PM's Allowed
    buffdog's Avatar
    Join Date
    Apr 2008
    Last On
    12-02-2013 @ 11:01 AM
    Location
    Manitoba, Canada
    Posts
    191
    Local Date
    03-28-2024
    Local Time
    11:09 AM
    .
    If we assume that the two rifles on the left side of the picture are identical, here is an enlargement of the other four types. With the variety of rifles here, this picture almost screams "TESTING" of sniper rifles. It is also possible that the two rifles on the left with the Lyman Alaskans on them had different magnification power on the lenses or different reticles ----eg. crosshair in one and post and crosshair in the other --Lyman did make both types.
    .

    .
    Last edited by buffdog; 06-15-2012 at 10:50 AM.

  12. #18
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 10:55 AM
    Location
    Edgefield, SC USA
    Posts
    4,039
    Local Date
    03-28-2024
    Local Time
    01:09 PM
    If memory serves, I think rifles with the C No.67 scope numbered 150 or so not counting the experimental types which was only 10 or 12. The Trade Pattern rifles with the Lyman Alaskans numbered 350. Don't quote me here maybe someone more knowledgeable on the production figures can comment. You out there Clive?

  13. #19
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,941
    Real Name
    Doug
    Local Date
    03-28-2024
    Local Time
    01:09 PM
    My Videos in Video Club
    12
    About 350 Trade Patterns according to Clive …

    1944 Enfield No.4 Mk1*(T) Long Branch TP (Trade Pattern) Sniper Rifle

    … and 20 Experimental's in total of different styles ..

    1943-44 Enfield No.4 Mk1* Experimental Long Branch 'Scout' Sniper Rifle

    Regards,
    Doug

  14. #20
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    07:09 PM
    350 Lymans........... So they're not exactly rare then? Had a PM about the 'special' butts. Has anyone done them on a copy lathe or thought about it?

+ Reply to Thread
Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast

Similar Threads

  1. Opinions wanted on this IBM
    By LeagleEagle in forum M1/M2 Carbine
    Replies: 6
    Last Post: 04-09-2011, 03:37 PM
  2. NO32 Mk1 scope (opinions wanted)
    By MichielVR in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 19
    Last Post: 11-28-2010, 07:33 AM
  3. 1905 SA bayonet dated 1921, opinions wanted
    By bigduke6 in forum Edged Weapons Forum
    Replies: 12
    Last Post: 08-03-2010, 03:05 AM
  4. some Opinions wanted..& I'm a bit of a show off
    By OWCH in forum M1/M2 Carbine
    Replies: 6
    Last Post: 06-10-2009, 06:34 AM
  5. Opinions Wanted: Refinishing Metal on a Steyr M95
    By SeamusMac in forum The Restorer's Corner
    Replies: 4
    Last Post: 03-10-2009, 07:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks