+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: One of 5000?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    06:52 AM

    One of 5000?

    Is this a Boer carbine?

    Attachment 34963
    As far as I can tell from the information in Ball, “Mauser Military Rifles of the World”, 3rd edition – yes:

    An 18” Mauser carbine, marked MOD. MAUSER 1896 over LUDWIG LOEWE & Co. BERLIN.
    Attachment 34968
    Flat-bottomed bolt body.
    Completely matching numbers.
    Number 4114. No prefix or suffix number.
    Attachment 34967
    The mark below the number is the crown over fraktur letter L(?), as shown in Ball, lying on its left side.

    The same mark is on the bolt handle, lying on its right side.
    Attachment 34969
    No trace of receiver ring crest or removal of such. Under a watchmaker’s eyeglass very fine finishing marks can be seen that go right round the receiver ring, into which marks the number and stamp have been applied - i.e. finishing marks before numbering, not the other way around (which would indicate refinishing).

    Bore excellent for the age, with (under an eyeglass) some fine pitting of the grooves at the muzzle end, but lands bright all the way through.
    Smooth ,almost mirror bright chamber. "Low mileage" internals.
    Attachment 34970

    Lovely woodwork, not varnished, almost too good for a rifle that was in a conflict.
    Attachment 34962
    However, I have looked at a great deal of Mauser woodwork of all vintages, and I cannot say that the wood was obviously refinished. If the wood was refinished, it was done excellently and a long time ago.

    Unusual alteration of the foresight, with a bead-strip hard-soldered onto the blade.
    Attachment 34964Attachment 34965

    Unusual alteration of the backsight, with a ring added on above the V. The V itself has not been damaged or filed out.
    Attachment 34966Attachment 34971

    The ring may look off-center, but it matches the V perfectly. Very careful work, not a fudge!

    Wallhanger price, so no financial tragedy if it is not a Boer Mauser.

    How say you gentlemen? Could it be? And how about the sights? Has anyone seen anything like this anywhere else, especially on Boer carbines?

    Looking forward to your comments!


    Patrick

    PS: all the photos are of the rifle as received a couple of hours ago. I have not cleaned it up, just goggled and made photos!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Patrick Chadwick; 07-05-2012 at 08:53 AM. Reason: PS

  2. The Following 4 Members Say Thank You to Patrick Chadwick For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    12-14-2023 @ 03:21 AM
    Location
    UK / South Africa
    Posts
    942
    Local Date
    03-29-2024
    Local Time
    05:52 AM

    Boer carbine

    Yes, this is a Boer Mauser carbine. 5,000 numbered 1-5000 made by Loewe, and 2,000 numbered 5001-7000 by DWM. All used in combat, issued to artillery and police commandos, but also very popular among officers. The sights have been upgraded, as you describe, but should make shooting a pleasure - reload your own with 170 grain bullet and 2,200 fps as modern factory ammo will shoot 1-2 feet high at 100 yds.
    Most Boer carbines had the foresight wings removed to prevent errors in snapshooting; and many have had the sling swivels reversed as there is a design fault - the rear saddle ring/swivel tends to bruise the right handed shooter's cheek on firing.
    The wood may have been slightly sanded - the same serial number should be visible on the wood just below the serial no. on the receiver; and there should be a gothic L on the buttstock as a stock cartouche.
    The survival rate of carbines exceeds the long rifles (of which ~37,000 produced), because Imperial troops found these to be so attractive and able to fit into the kitbag. Not sure what you paid, in the UKicon this would fetch about £600-800 from a dealer and a bit less in a private sale; more if carved with a name.

    If you need a clearing rod, PM me as I have some spares.
    Last edited by RobD; 07-06-2012 at 10:04 AM.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    06:52 AM
    Thread Starter
    Thanks for the confirmation Rob, PM is on its way.
    Quote Originally Posted by RobD View Post
    The wood may have been slightly sanded - the same serial number should be visible on the wood just below the serial no. on the receiver; and there should be a gothic L on the buttstock as a stock cartouche.
    No trace of either marking, so perhaps it was lightly touched up at some time in the past.

    Maybe a range report tomorrow!

  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    12-14-2023 @ 03:21 AM
    Location
    UK / South Africa
    Posts
    942
    Local Date
    03-29-2024
    Local Time
    05:52 AM
    By the way, I have never before seen anything like those sight modifications on any Boer rifle. In general, the Boers left their vee and barleycorn sights alone - cut-down or carved woodwork is the commonest customization one sees.

  8. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    06:52 AM
    Thread Starter

    When in doubt - leave it alone

    Quote Originally Posted by RobD View Post
    By the way, I have never before seen anything like those sight modifications on any Boer rifle. In general, the Boers left their vee and barleycorn sights alone - cut-down or carved woodwork is the commonest customization one sees
    It is indeed very curious. I don't know whether to
    a) leave it because that is how the Boer used it - the "part of its history" argument
    b) remove it because it was added on later, so is "non-historical" as far as the Boers are concerned
    c) leave it because it works better like that (I'll find out today)
    d) leave it because I just don't know whether it is "Boer-original" or not. Probably never provable either way.
    e) leave it because I'm just plain lazy.

    As you can see, until I know more, the conservative arguments are in the majority - leave it as it is!


    Patrick
    Last edited by Patrick Chadwick; 07-08-2012 at 12:31 PM.

  9. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    villiers's Avatar
    Join Date
    Jul 2008
    Last On
    01-08-2017 @ 08:32 AM
    Location
    xxxxxxxxxxxxxxxxx
    Posts
    1,084
    Real Name
    xxxxxxxx xxxxxxxxx
    Local Date
    03-29-2024
    Local Time
    07:52 AM
    Patrick, the hard soldered front sight blade shows the same problem I had with my two short carbines. The regulation sights were obviously set for volleys aimed at a distant target. Getting the rifle to hit anything less than 300 yards meant lengthening the front sight blade, as the rear sight couldn´t be lowered any further. It seems obvious that this is a typical modification made for and by a fighting individual to a rifle, designed for use by a military unit. Anything by Loewe/DWM is a keeper!

  10. #7
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    06:52 AM
    Thread Starter
    Quote Originally Posted by villiers View Post
    It seems obvious that this is a typical modification made for and by a fighting individual to a rifle, designed for use by a military unit.
    Thanks for that encouraging message Patrick. The same thought had occurred to me, but I reckoned it sounded too much like special pleading by the owner! With this type of rifle, where you anticipate a very high POI at 100 meters, I usually tack on a second target for aiming below the proper target as a precautionary move. I have experienced service rifles that shoot over the target frame at 100, but not yet one that shoots too low!

    Can't get to the range today, so I'll find out tomorrow!
    Last edited by Patrick Chadwick; 07-08-2012 at 11:28 AM. Reason: typo

  11. #8
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    06:52 AM
    Thread Starter

    Boer carbine - range report

    Got to the range today, in the tropical thunderstorm weather that is plaguing Europe at the moment. As I hoped (and Patrick Villiers suggested) the sight alteration puts the carbine well on target at 25 meters
    Attachment 35029

    and 100 meters.
    Attachment 35030
    No sight alteration required going from 25 to 100!
    Extraordinary, especially when compared with the usual Mauser carbine performance of shooting sky-high at such short ranges. Whoever made this alteration understood his rifle well.

    As you can see, the POI in the 25 meter target is in the same (relative) area as the group at 100 meters. So it looks as if all I need to do is drift the foresight blade a touch to the right, and then leave it alone! An all-matching historical gun in good condition that shoots OK* for a wallhanger price - this time, I really got lucky!

    *With practice, I think it ought to manage "all in the 9", which is about as good as you can expect with such a short sight radius.
    Last edited by Patrick Chadwick; 07-08-2012 at 12:30 PM.

  12. Thank You to Patrick Chadwick For This Useful Post:


  13. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    villiers's Avatar
    Join Date
    Jul 2008
    Last On
    01-08-2017 @ 08:32 AM
    Location
    xxxxxxxxxxxxxxxxx
    Posts
    1,084
    Real Name
    xxxxxxxx xxxxxxxxx
    Local Date
    03-29-2024
    Local Time
    07:52 AM
    I wouldn´t drift the sight without looking into what it does at different distances. My LE No. 5 doesn´t seem to have a straight trajectory. I "corkscrews" and gets straighter at about 300 yards. Your Boer Mauser drifts from left to right from 25 to 100 metres, so might well be ok as is.

  14. #10
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    06:52 AM
    Thread Starter
    Quote Originally Posted by villiers View Post
    Your Boer Mauser drifts from left to right from 25 to 100 metres, so might well be ok as is.
    Not so. Patrick, I get your point, but please read the handwritten comments on the first target. The 5 shots on the left are a test group from my .30M1 carbine. Only the shot at 4 o'clock in the 7 ring is from the Boer carbine.

    The weather was awful, and the targets were disintegrating before my eyes. I fired just that single shot, and went straight to 100 meters (the second target). It is in the same area as the 100 meter group, so the rifle is quite consistent between 25 and 100 meters - the angular deviation is the same. I look forward to better weather and the chance to fire longer strings that will give a more solid statistical result. But this rifle is an A1 keeper!

    Quote Originally Posted by villiers View Post
    I wouldn´t drift the sight without looking into what it does at different distances.
    Dead right I won't! The POI can change significantly with the load, so as long as the group is actually on the paper and can be evaluated, I never make corrections until the load has been optimized. Especially with driftable sight blades, where repeated knocking left and right will loosen the dovetail.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Winchester M1917 S/N below 5000 - different markings
    By Promo in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 4
    Last Post: 11-23-2011, 10:21 AM
  2. USMC Benchmade 5000
    By Garandrew in forum Edged Weapons Forum
    Replies: 5
    Last Post: 11-03-2011, 09:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks