+ Reply to Thread
Results 1 to 4 of 4

Thread: ROSS 1910 R Marker .303 Ross and LC

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    RCEMERalf's Avatar
    Join Date
    Feb 2012
    Last On
    12-15-2015 @ 03:53 PM
    Location
    Lake Shores of NE Greater Detroit, MI, USA
    Age
    78
    Posts
    155
    Local Date
    03-19-2024
    Local Time
    12:18 AM

    ROSS 1910 R Marker .303 Ross and LC

    Hopefully I will be adding a picture of my 1910 R. It is stamped .303 Ross along the barrel, but also LC. Is this usual?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    buffdog's Avatar
    Join Date
    Apr 2008
    Last On
    12-02-2013 @ 11:01 AM
    Location
    Manitoba, Canada
    Posts
    191
    Local Date
    03-18-2024
    Local Time
    11:18 PM
    .
    Some of these commercial Ross rifles were made after the Government took over the Ross factory, using up the parts on hand when possible.

    The "303 Ross" stamped on the barrel is right for a sporter, but the "LC" barrels were for Military use.

    The commercial Ross sporters had a serial number on the left side of the barrel near the receiver, in numberals about 1/8 inch high. If you remove the butt plate, there MAY (or MAY NOT) be a serial number stamped on the inside top of the butt plate.

    Have you fired it? If so, does it blow out the cases? Does it split any fired cases, and if it does, you are going to have to anneal them. If you don't know how to anneal cases, PM me.

    If you reload, keep all fired cases for this rifle seperate, and NECK SIZE the cases only. You can buy a LEE set of reloading dies that will neck size the brass, or alternatively, put about a 1/8 inch BRASS washer under the regular resizing die when you are reloading. Full length resizing will weaken the cases after a few loadings, and you WILL have case seperations.

    Make sure that the bolt is assembled correctly and locks fully. Use a small flashlight and shine it into the rear of the receiver while closing the bolt to see the locking lugs turn. It they fully engage the receiver, you are good, but if they only engage about 1/7 th. of the receiver and a lot of the lugs are showing, you have a big problem. This is a set of pictures that I made up to show people.
    .

    .
    Last edited by buffdog; 07-16-2012 at 01:19 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    RCEMERalf's Avatar
    Join Date
    Feb 2012
    Last On
    12-15-2015 @ 03:53 PM
    Location
    Lake Shores of NE Greater Detroit, MI, USA
    Age
    78
    Posts
    155
    Local Date
    03-19-2024
    Local Time
    12:18 AM
    Thread Starter
    Buffdog, thanks much. I have studied your bolt assembly information before and have read the posts on neck sizing for large chambers. This forum is great. It renewed my interest in the Ross rifle. I have owned this one for over 35 years. I cannot remember if I fired it or not. The mystery deepens somewhat. Hopefully I will download a picture of the left side of the barrel with serial number and ," MADE in CANADA" stamping. The barrel is a good deal slimmer than that of the military 1910, with a smaller front sight mount, without screw holes for a sight guard. The barrel is 26 in. bolt face to muzzle as opposed to 30 1/2 . The barrel diameter just forward of the sight mount is .580 compared to .653 for the military M1910. " 04" is stamped upside-down inside the toe of the butt plate( last two of serial number). I surmise this is a 1910 R with an , "LC" stamp ?????

  6. #4
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,648
    Local Date
    03-18-2024
    Local Time
    10:18 PM
    That is a very late rifle in the 17,000 range. First time I've seen or heard of a LC markings on a sporter. Is the chamber actually enlarged?
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

+ Reply to Thread

Similar Threads

  1. Ross Presentation Model 1910
    By boltaction in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 05-18-2012, 02:21 AM
  2. 1910 Ross sporter in 280 question
    By zemeinc in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 12-27-2011, 12:24 AM
  3. Help with unit ID. Ross 1910
    By koldt in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 05-20-2010, 12:43 PM
  4. Value of Ross 1910 Sporter
    By Cantom in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 01-28-2007, 03:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks