+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26

Thread: Type 99 arisaka cleaning rod problems

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    03-28-2024
    Local Time
    06:22 PM

    Type 99 arisaka cleaning rod problems

    I am in need of some help. My type 99 arisaka is a beautiful series 7 nagoya rifle with original stock and all matching #`s. I managed to find an original cleaning rod after scavenging it from a more beat up rifle. My arisaka takes the long cleaning rod, not the shorter versions, but when i try to put it in i run into a problem. It seems that whoever brought it over from the war forgot to clean out the cleaning rod hole and now there is some kind of rotten packing material stuck all the way down the rod hole. I want to get it out so i can put the rod in but i can`t seem to find a tool that would fix this problem without damaging the stock. Has anyone else had this problem and if so how can i clean all of this material out? Any help is greatly appreciated.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member AGB-1's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2022 @ 05:41 PM
    Location
    Krugerville Texas
    Age
    84
    Posts
    344
    Local Date
    03-28-2024
    Local Time
    06:22 PM
    You might try to JB weld a wood or metal screw (the appropiate size) to a metal rod and after soaking the packing, try to hook on to it and pull it out.AGB-1

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 06:16 PM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    07:22 PM
    Wire coat hanger with the twisty part left on.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    03-28-2024
    Local Time
    06:22 PM
    Thread Starter
    Thank you guys. I have already tried the wire hanger but could only get out maybe an inch or two of material before the hanger bent up and could no longer penetrate the material. I probably couldn`t do the welding bit since i`m a young collector (i`m only 22) and i lack the experience of a true welder. i did managa to dtermine what the material might be. It looks similar to rotten rope or twine and it appears to be wrapped in a spiral pattern in the hole if that makes any sense. I think imay need some kind of hard sharp probe to poke through the material.

  7. #5
    Contributing Member AGB-1's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2022 @ 05:41 PM
    Location
    Krugerville Texas
    Age
    84
    Posts
    344
    Local Date
    03-28-2024
    Local Time
    06:22 PM
    JBWeld is an epoxy. No skill required except mixing the two parts and applying. AGB-1http://www.jbweld.com/?gclid=CLaR3MLp07ICFROnPAoddm0APw
    Last edited by AGB-1; 09-26-2012 at 02:01 PM.

  8. #6
    Senior Moderator
    (Milsurp Forums)
    Bill Hollinger's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 11:35 AM
    Location
    Pacific Northwest, Oregon
    Posts
    6,021
    Real Name
    Bill Hollinger
    Local Date
    03-28-2024
    Local Time
    04:22 PM
    Try using an old Outters cleaning rod and .22 bore brush. Attach it to a drill motor and whittle away at it. Use Hopps #9 to pour into the hole. Use the drill motor on a very low speed.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    03-28-2024
    Local Time
    06:22 PM
    Thread Starter
    i think i have it now. i poured a mixture of both hot and lukewarm water down the hole very carefully and now that i let the fibers absorb the water, they`re starting to break apart and now i`m getting out a lot more material than before. Thank you everyone for your suggestions and i know if i need help with my old warhorse again i can come here

  10. #8
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-28-2024
    Local Time
    06:22 PM
    I have done this before. I cut the threads off a drywall screw and epoxied it into the threaded end a length of old aluminum cleaning rod section. It will thread into the "stuff" and allow you to pull it out.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    03-28-2024
    Local Time
    06:22 PM
    Thread Starter
    update: i have succeeded in pulling out all of the material that was stuck in the hole. Thanks to suggestions about using apoxy solution i cleaned it completely out usng a mixture of hot/lukewarm water and using the apoxy to get the rest off of the sides. I put the cleaning rod in yesterday and now it looks even more beautiful tha it did when i bought it a month ago. Thank you everyone and i`m sure i`ll have more questions in the future about different problems that might come up.

  12. #10
    Senior Moderator
    (Milsurp Forums)
    Bill Hollinger's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 11:35 AM
    Location
    Pacific Northwest, Oregon
    Posts
    6,021
    Real Name
    Bill Hollinger
    Local Date
    03-28-2024
    Local Time
    04:22 PM
    Well, we wouldn't know how beautiful it is without photos

    Glad to hear it worked out for you.
    Bill Hollinger

    "We're surrounded, that simplifies our problem!"

  13. Thank You to Bill Hollinger For This Useful Post:


+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. TYPE 30 Arisaka
    By bwilliamson12 in forum Japanese Rifles
    Replies: 4
    Last Post: 01-29-2015, 01:49 PM
  2. Arisaka Type 99 rebuild
    By ILfarmer in forum Japanese Rifles
    Replies: 10
    Last Post: 06-04-2012, 03:01 PM
  3. arisaka type 02/45
    By joshkeefer in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 0
    Last Post: 03-07-2012, 05:10 PM
  4. Arisaka Type 99
    By willie8 in forum Japanese Rifles
    Replies: 2
    Last Post: 11-16-2011, 05:19 PM
  5. derf's nambu type 14 pistol and type 99 7.7 arisaka
    By DERF in forum Japanese Rifles
    Replies: 2
    Last Post: 07-19-2010, 09:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks