+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: FAL ammo test

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member GUTS's Avatar
    Join Date
    Oct 2008
    Last On
    05-10-2021 @ 06:25 PM
    Location
    South Dakota
    Age
    66
    Posts
    569
    Local Date
    04-18-2024
    Local Time
    10:44 AM

    Smile FAL ammo test

    I took the FAL out and tested some ammo yesterday. This test was shot at 100 yards with iron sights, an 11 1/2 lb trigger, and 55 year old eyes. Better eyes would have better results. The ammo was five rounds of Indian NATO, Argentineicon NATO, WRA 68, three rounds of my handloads and three rounds of the FNM because that's all I had. I used my led sled for a rest. I shot the whole test at the same ShootnSee target so I transfered the holes to these targets so it wouldn't look so busy.

    The rifle:



    The ammo:





    The handloads:


    The Indian:


    The Argentine:


    The WRA 68(I think there was a flyer here):


    The handloads:


    The FNM(I claim flyer here too):


    This test doesn't probably have a whole lot to do with anything but hopefully it will be a little entertainment for the troops.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by GUTS; 11-03-2012 at 03:42 PM.

  2. The Following 4 Members Say Thank You to GUTS For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Head Moderator
    (Founding Partner)

    Site Founder
    Stevo's Avatar
    Join Date
    Oct 2006
    Last On
    08-31-2015 @ 06:39 PM
    Location
    NW Alberta
    Posts
    2,357
    Local Date
    04-18-2024
    Local Time
    09:44 AM
    Thanks. Wish I could take my FAL out and shoot it.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member tankhunter's Avatar
    Join Date
    Apr 2010
    Last On
    06-28-2023 @ 05:15 PM
    Location
    UK
    Posts
    1,054
    Real Name
    Mike
    Local Date
    04-18-2024
    Local Time
    10:44 AM
    Just a small point on this Guts. Your Trigger Mech Housing axis screw is 180 Degrees out of kilter. It SHOULD be in the opposite way round to what it is in your photograph! I know it's Pedantic, But it's an Armourers eye for detail!
    In Brit Military Service, in the condition it is in now. It was a sure sign of 'Illegal Stripping'. That is to say, the 'User' it was issued to, had stripped it down further then he was permitted to in Service.

    IE: If they were not Armourer trained, there was the possibility of: Losing small componants, Incorrect assembly with the potential for a lethal result to some unfortunate! Or 'Tampering' with the internal mech in an extremely stupid move to get the rilfe to full-auto! (Uncontrolable continuous Full-Auto firing with damaging/lethal Results!) I am VERY confident that Peter & Skippy have been involved like myself. In sorting this 'Misdemeanor' MANY Times in service!..........

  7. Thank You to tankhunter For This Useful Post:


  8. #4
    Legacy Member GUTS's Avatar
    Join Date
    Oct 2008
    Last On
    05-10-2021 @ 06:25 PM
    Location
    South Dakota
    Age
    66
    Posts
    569
    Local Date
    04-18-2024
    Local Time
    10:44 AM
    Thread Starter
    It sucks to get caught being dumb. I have done my pushups and corrected the infraction!

  9. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:11 AM
    Location
    Victoria BC
    Posts
    29,902
    Real Name
    Jim
    Local Date
    04-18-2024
    Local Time
    08:44 AM
    Quote Originally Posted by tankhunter View Post
    "illegal Stripping"
    Strange...we taught this as detailed stripping. A user conducted service of the rifle for detailed cleaning. We had no issues with lost parts...
    Regards, Jim

  10. #6
    Legacy Member Aussie48's Avatar
    Join Date
    Oct 2012
    Last On
    04-12-2020 @ 06:16 PM
    Location
    The Land Down Under, Australia
    Posts
    366
    Local Date
    04-19-2024
    Local Time
    01:44 AM
    Yes Australianicon Army we were taught to field strip the whole thing apart, nice pick up on teh screw though. Of course the match under the sear always puts them on full auto.

  11. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-13-2024 @ 05:00 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,510
    Real Name
    Peter Laidler
    Local Date
    04-18-2024
    Local Time
    04:44 PM
    Maybe someone could resurrect the thread about the matchstick myth.

  12. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:11 AM
    Location
    Victoria BC
    Posts
    29,902
    Real Name
    Jim
    Local Date
    04-18-2024
    Local Time
    08:44 AM
    I never had any luck with the matchstick...found it to make them unserviceable. I just converted mine instead. Good thing Peter never inspected it, I'd have been for the hi-jump...
    Regards, Jim

  13. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Ro-bert's Avatar
    Join Date
    Feb 2011
    Last On
    01-24-2020 @ 04:24 PM
    Location
    Slovenia
    Age
    53
    Posts
    58
    Local Date
    04-18-2024
    Local Time
    04:44 PM
    My test with commercial Ammo (@100m):

    With a little more concentration would be the group probably even tighter - definitely without flyer.

    Newly i tested some Germanicon surplus (MEN Ni-plated, berdan) - the group was slightly larger, but still 10.

    EDIT:
    My black lady has spectacles:
    Last edited by Ro-bert; 11-06-2012 at 02:17 PM.

  14. #10
    Legacy Member Aussie48's Avatar
    Join Date
    Oct 2012
    Last On
    04-12-2020 @ 06:16 PM
    Location
    The Land Down Under, Australia
    Posts
    366
    Local Date
    04-19-2024
    Local Time
    01:44 AM
    The match only works on Lithgowicon made SLR's (I felt certain Peter would have known that being the font of all knowledge) as being cheap we only produced the one receiver type for either the L1 or the L2

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 8mm Mauser ammo test
    By Lock and Load in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 08-18-2012, 02:56 PM
  2. Preliminary Ammo Test- and Morale Builder
    By jmoore in forum Range Reports - Show us how good you are!
    Replies: 5
    Last Post: 05-14-2011, 07:58 AM
  3. Test Drive of Recently Acquired Ammo.
    By Skip in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 05-24-2010, 09:59 PM
  4. Hi Bigduke6, i`ve done a .30-06 ammo test
    By gunner in forum Ammunition and Reloading for Old Milsurps
    Replies: 1
    Last Post: 07-28-2009, 06:15 AM
  5. To Patrick Chadwick, ammo test for the 96/11
    By gunner in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 07-17-2009, 10:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts