+ Reply to Thread
Results 1 to 6 of 6

Thread: Extractor screw and thru bolt for TZ 47 sight on No4 Mk 1/2

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Chris B.'s Avatar
    Join Date
    Sep 2011
    Last On
    11-19-2014 @ 10:01 PM
    Location
    Pacific NW
    Posts
    26
    Local Date
    03-29-2024
    Local Time
    05:06 AM

    Extractor screw and thru bolt for TZ 47 sight on No4 Mk 1/2

    Hello,

    I am looking for a good source for the extended extractor screw and the rear bolt that replaces the pln on a No4 Mk1/2. I have a TZ 47 sight that I would like to mount on one of my rifles.

    Thanks,

    Chris
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Chris B.; 01-06-2013 at 04:32 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Brian B's Avatar
    Join Date
    Oct 2007
    Last On
    Today @ 12:14 AM
    Location
    ALTADENA, CA
    Posts
    360
    Real Name
    Brian Brown
    Local Date
    03-29-2024
    Local Time
    06:06 AM
    Chris B,

    Might want to give this a try. I ordered some obsolete screws from him a year or two ago.

    Services

    Hope this helps,

    Brian

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member ArtioZen's Avatar
    Join Date
    Nov 2012
    Last On
    05-25-2023 @ 09:54 AM
    Location
    Allentown PA
    Posts
    228
    Real Name
    Henry
    Local Date
    03-29-2024
    Local Time
    09:06 AM
    Also the internatinal auction site - item number 181057138131 - look for quality materials and maufacture in the fasteners - I have come across reproduction screws where the material is brittle and the heads and slots are poorly formed ndwill barely seat or greet a driver. The TZ does not require a lot of torque to live hapily on the No4 receiver - the sight axis pin replacement bolt can deflect the body walls if you get over zealous - the better kits provide a lock nut so you can hold torque and keep the original wall spacing.

    I hope this helps!

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Chris B.'s Avatar
    Join Date
    Sep 2011
    Last On
    11-19-2014 @ 10:01 PM
    Location
    Pacific NW
    Posts
    26
    Local Date
    03-29-2024
    Local Time
    05:06 AM
    Thread Starter
    Quote Originally Posted by Brian B View Post
    Chris B,

    Might want to give this a try. I ordered some obsolete screws from him a year or two ago.

    Services

    Hope this helps,

    Brian
    Thanks!

    ---------- Post added at 05:42 PM ---------- Previous post was at 05:41 PM ----------

    Quote Originally Posted by l1a1 breakdown View Post
    Also the internatinal auction site - item number 181057138131 - look for quality materials and maufacture in the fasteners - I have come across reproduction screws where the material is brittle and the heads and slots are poorly formed ndwill barely seat or greet a driver. The TZ does not require a lot of torque to live hapily on the No4 receiver - the sight axis pin replacement bolt can deflect the body walls if you get over zealous - the better kits provide a lock nut so you can hold torque and keep the original wall spacing.

    I hope this helps!
    Thanks for the info.

    Chris

  7. #5
    Legacy Member Patt14 No2's Avatar
    Join Date
    Mar 2009
    Last On
    11-25-2021 @ 10:13 AM
    Location
    North West England
    Posts
    31
    Local Date
    03-29-2024
    Local Time
    02:06 PM

    TZ47 screws

    I have a few new genuine sets I got from Parkers before they finally closed the doors PM me if you still need a set.

  8. #6
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-29-2024
    Local Time
    06:06 AM
    No4 Mk2 forend cross bolt works well. A bit long so fit a nut or cut it off as you prefer.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

+ Reply to Thread

Similar Threads

  1. No1 MkIII* stuck extractor screw extraction?
    By HOOKED ON HISTORY in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 07-09-2012, 04:00 PM
  2. install windage screw on a 1903 rear sight
    By george0109 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 07-19-2011, 08:20 PM
  3. Phooey! Broken front sight clamping screw
    By jmoore in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 23
    Last Post: 12-11-2009, 10:56 AM
  4. M1 Garand Front Sight Screw Seals
    By gcr-g in forum M1 Garand/M14/M1A Rifles
    Replies: 9
    Last Post: 09-25-2009, 11:17 AM
  5. P14 bolt and P17 front sight
    By greybeard in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 1
    Last Post: 02-14-2008, 07:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks