+ Reply to Thread
Results 1 to 10 of 10

Thread: 1903a3 identification...information

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Comanchero's Avatar
    Join Date
    Feb 2013
    Last On
    04-05-2013 @ 05:59 AM
    Location
    Arizona, USA
    Posts
    5
    Local Date
    03-28-2024
    Local Time
    04:38 PM

    1903a3 identification...information

    Another new guy here, with my first 03a3.
    This site looks like it has a number of very well educated individuals in this arena, and since I am a babe in the woods when it comes to the 03a3 I thought maybe one or more of the more educated here might give me some help on telling me a bit about my first 03a3 rifle.

    I will thank you in advance for any and all info you might be able to provide as far as what I have here.....hopefully enough pics are provided in order to give you something to work with. If there is anything else that might be of help, let me know and I will try to shoot a pic, or check it out if possible.

    Click on the pic for a larger image:



































































    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Alkali's Avatar
    Join Date
    Mar 2009
    Last On
    09-19-2015 @ 01:20 AM
    Location
    Roswell, NM
    Posts
    56
    Local Date
    03-28-2024
    Local Time
    05:38 PM

    Remington 03-A3

    Comanchero - This'n looks pretty good to me. It doesn't appear to have been issued out as there is no visible wear. The "OG" stamped on the butt indicates it passed through the Ogden UT arsenal at some after its manufacture; probably just stored and later inspected. The bolt is a spare part and the bolt shroud/safety is a unit manufactured by Smith-Corona. As made, the bolt would have been all Remington parts. The correct "R" parts are obtainable at no great expense.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    03-28-2024
    Local Time
    07:38 PM
    A nice looking rifle with sharp markings. Alkali is right about the bolt, but I'm not sure I would worry about finding the correct Remington parts; it's likely the bolt was replaced at Ogden, & that's just part of it's military history.

    At the beginning of WW2, the M1icon rifle had yet to prove itself in combat, so the War Dept contracted with Remington & Smith Corona to manufacture the 1903 rifle; to lower the price & speed production, changes were made & it morphed into the 1903A3 rifle. The markings on the left side are the "cartouches": RA - Remington Arms, crossed cannons - Defense Acceptance Seal, FJA - Frank J Atwood (military inspector). The markings on the bottom of the stock are factory inspector markings. The P on the grip is the proof marking.

  6. Thank You to Neal Myers For This Useful Post:


  7. #4
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    03-28-2024
    Local Time
    06:38 PM
    You can buy new/mint Remington 03-A3 bolt bodies from Springfield Sporters. I suggest you buy 1-2 and try to find a buddy to headspace the correct bolt for you. A mint Remington bolt will look "right" in your rifle.

  8. Thank You to Calif-Steve For This Useful Post:


  9. #5
    Advisory Panel
    Rick the Librarian's Avatar
    Join Date
    Nov 2008
    Last On
    04-09-2023 @ 08:59 PM
    Location
    NW Washington State
    Age
    74
    Posts
    2,301
    Real Name
    Rick Slater
    Local Date
    03-28-2024
    Local Time
    04:38 PM
    Neal, not to be picky, but Frank J. Atwood was the commander of the Rochester Ordnance District and was not an inspector. M1icon Garands were marked with the commander of the Springfield Armory, not inspectors' initials. High Standard was originally given contracts for M1903s - they passed along a lot of the work to Smith-Corona (although they supplied some of ther parts) and, by the the time SC got started, production had morphed into the M1903A3. Remington was picked by the Britishicon in 1940.
    People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.

    --George Orwell

  10. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Comanchero's Avatar
    Join Date
    Feb 2013
    Last On
    04-05-2013 @ 05:59 AM
    Location
    Arizona, USA
    Posts
    5
    Local Date
    03-28-2024
    Local Time
    04:38 PM
    Thread Starter
    Should there be any real motivation for me to restore the bolt to the original Remington parts?

    The story on this rifle is that an old woman whose husband had recently died, brought in a bunch of his firearms to a local law enforcement office and gave them to the department for disposal. One of the officers saw the 03a3 and took a liking to it. The department allowed him to purchase it for $1. The LEO then either gifted it or sold it to his nephew, and that is who I purchased it from.
    If the story is true (who knows for sure), it is possible that the original owner got it as it currently is and this was sold to him in it's current configuration.

    Thanks to all of you for your input so far.....I appreciate it!

  11. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Alkali's Avatar
    Join Date
    Mar 2009
    Last On
    09-19-2015 @ 01:20 AM
    Location
    Roswell, NM
    Posts
    56
    Local Date
    03-28-2024
    Local Time
    05:38 PM
    IMHO, you probably should go ahead and make the effort to obtain a completely correct Remington O3-A3 bolt for this rifle. They are still easily obtainable, but just might not be some years in the future. I very seldom change out any parts on any military rifle and only if it is very clear that I am making a correct improvement. Believe me, 20-30 years can fly by in a hurry and you (and the next owner) will eventually thank yourself for doing it while you can.

    The existing bolt has some value and there is a Smith-Corona owner who is looking for that S-C bolt shroud right now for his rifle. Here is a good reference source example;

    http://www.vishooter.net/m1903/rem_sc_fps.jpg
    Last edited by Alkali; 02-20-2013 at 02:17 PM. Reason: added info

  12. #8
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Today @ 01:15 AM
    Location
    Sweet Home Alabama
    Posts
    1,061
    Local Date
    03-28-2024
    Local Time
    06:38 PM
    I agree with Alkali. Since only the bolt assembly is incorrect, I would recommend restoring the rifle with a correct bolt. It would improve the rifle's appearance and increase its value. But, be aware that not just any Remington "R" marked parts would be correct. Remington made many design and manufacturing changes over the course of their production run. So, it's important to find the correct Remington parts with original finish which match your rifle's serial number. And if you need help in that regard, kindly email.

    Hope this helps.

    J.B.

  13. Thank You to John Beard For This Useful Post:


  14. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    broham's Avatar
    Join Date
    Mar 2013
    Last On
    04-02-2013 @ 04:44 PM
    Location
    usa
    Posts
    2
    Local Date
    03-28-2024
    Local Time
    06:38 PM
    Great looking rifle

  15. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Brendan2324's Avatar
    Join Date
    Jan 2020
    Last On
    01-12-2020 @ 03:10 PM
    Location
    Ohio
    Posts
    1
    Local Date
    03-28-2024
    Local Time
    06:38 PM
    I need help identifying my Remington 1903a3. I have photos but don’t know how to post on here. I know the barrel and receiver are from may 1943

+ Reply to Thread

Similar Threads

  1. 1903 and 1903A3 barrel identification and interchangeability
    By Rusty.303 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 8
    Last Post: 09-26-2011, 11:08 AM
  2. Help with identification!
    By thepalmsUK in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 09-14-2010, 02:55 PM
  3. m1 Identification help
    By softail817 in forum M1/M2 Carbine
    Replies: 10
    Last Post: 10-01-2009, 07:35 PM
  4. gun identification
    By mb53 in forum Milsurps General Discussion Forum
    Replies: 1
    Last Post: 01-26-2009, 01:20 AM
  5. help in identification...
    By Buzzkill in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 02-15-2008, 12:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks