Lower Barrel Band Bolt Mark III

**rescuerandy2** · 04-06-2013 06:12 PM

Good Afternoon. Just purchased my first Ross after 38 years of waiting. Beautiful rifle with just one small issue. Bubba used a long brass bolt for the lower band. It was jammed but I was able to extract it with no damage. Now I need to replace. Quick search on line was a NO-GO via the usual shops. Any suggestions would be greatly appreciated. Thanks, Randy

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 04-06-2013 06:12 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**boltaction** · 04-09-2013 09:09 AM

What model of Ross? A 1905 or a Mk III (1910)? You are just looking for the screw that holds the band on from underneath?

Ed

**bushwhacker** · 07-14-2013 07:33 PM

These are standard number screw threads. The worst case is that you find someone to make you a dimensioned drawing of the correct screw and get someone with a lathe to cut it. The screw can be heat blued with a torch to desired colour. I have made seveal of them.

Thread: Lower Barrel Band Bolt Mark III

Thread Tools

Search Thread

Display

Lower Barrel Band Bolt Mark III

Similar Threads

03 Lower Band questions

M1 Loose Lower Band

Lower Band Spring Removal

Tags for this Thread

Posting Permissions