+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Ithaca 37 "Trench Gun" - Opinions Requested

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member mtrpdw's Avatar
    Join Date
    Feb 2011
    Last On
    12-25-2023 @ 08:48 AM
    Location
    Toronto, Ontario, Canada
    Posts
    19
    Local Date
    03-28-2024
    Local Time
    09:02 AM

    Ithaca 37 "Trench Gun" - Opinions Requested

    A friend in Florida recently purchased a 1963 Ithaca shotgun which had, to me, some interesting features.

    First off, this Ithaca 37 was NEVER held out to be an original Vietnam issue Trench Gun. This seems to be supported by the fact that it sold for around $550.00.

    Story was from the person, in his late 20's, who sold it (and we know how stories go), that it was his grandfather's gun, who was a weapons tech for the U.S. Air Force in the Vietnam conflict - time frame: unknown.

    The 37 was used for perimeter security duties by the grandfather. He brought it back with him when he finished his tour, and owned it until his death, when it was passed on to other family members.

    There are no U.S. military martial markings on the gun, and the serial number range is outside known military issue 37's.

    The stock Sling Swivel inletting, which appears precise and professional, is more consistent with Stevens 520/620 Trench Guns - never seen it on Ithaca 37 Trench or Riot guns.

    Butt Plate looks to be a replacement.

    Additionally, the transverse/cross grooves for the Bayonet Lug Screws appear professionally milled, but shiny - not parkerized over.

    Bayonet Adaptor/Heat Shield definitely looks legit.

    The parkerized finish on the gun and heat shield look the same, and appear to be at least a 30 year, older grey/green finish.

    The Barrel "CYL" choke marking has been over-stamped with "FULL", and there is a star (*) stamped on chamber/lug area.

    Most interesting for me was that the receiver has the plain "Riot/Trench Gun" finish - no waterfowl scene.

    Unless I'm wrong, I didn't think Ithaca didn't produce plain "Riot/Trench Gun" receiver finishes until at least 1965/66 - the serial number on this gun shows it was produces in 1963.

    Just looking for professional opinions on what this 37 might be. If it is a clone, or maybe a police gun, it was made up long before faking 37 Trench guns were popular.

    Your thoughts???
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by mtrpdw; 06-19-2013 at 07:16 PM.

  2. Thank You to mtrpdw For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    06:02 AM
    The buttstock doesn't even look like it's Ithaca. Like you suggest, it looks more like a Stevens product. I can't read the buttplate. The transverse screw grooves are definitely afterthought and the full/cyl are over stamped indicating a change in status by persons unknown at a time unspecified...

    The thing about guns like this is, the originator sometimes doesn't tell a good story. What he meant to say and what's understood are sometimes vastly different. This is just like the one I carried, I carried an Ithaca like this, turns into "I carried this one." And it could have been made up forever ago, before anyone thought of faking. No malice meant, just put together. Just because the current owner thinks the originator owned it before doesn't make it so. Just an accumulation of parts...

    But...I could be wrong...
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member navyfastjet's Avatar
    Join Date
    Feb 2012
    Last On
    01-14-2024 @ 05:04 PM
    Location
    South Florida
    Posts
    25
    Local Date
    03-28-2024
    Local Time
    08:02 AM
    The most interesting part for me is why is there no hunting scene on a gun made in 1963 if its not military? I thought they didn't give that option to police (M and P) until the later sixties? Anyone know what the star and 4 markings are on the barrel?

  7. #4
    Legacy Member Tom Doniphon's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Posts
    317
    Local Date
    03-28-2024
    Local Time
    06:02 AM
    The "4" marking on the barrel is Ithaca's full choke designation. A lot of the Ithaca guns made in the 60s for LE and the Military had a full choke bore.

  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    06:02 AM
    So Tom...what's YOUR take on this one??
    Regards, Jim

  9. #6
    Legacy Member navyfastjet's Avatar
    Join Date
    Feb 2012
    Last On
    01-14-2024 @ 05:04 PM
    Location
    South Florida
    Posts
    25
    Local Date
    03-28-2024
    Local Time
    08:02 AM
    So the barrel started out as a cyl choke...then persons unknown overstamped it with FULL and then put "4" on barrel? Could the original owner have brought or had gun shipped to vietnam as private purchase and then an armorer installed more military components? Again I'm confused by the 1963 manufacture date, no hunting scene and the uniformity and uniformed age and wear of the grey parkerizing.

  10. #7
    Legacy Member mtrpdw's Avatar
    Join Date
    Feb 2011
    Last On
    12-25-2023 @ 08:48 AM
    Location
    Toronto, Ontario, Canada
    Posts
    19
    Local Date
    03-28-2024
    Local Time
    09:02 AM
    Thread Starter
    Thanks to Tom D. and BAR for your input.

    As I suspected, the stock may be from a Stevens 520/620, and asked the current owner to remove the stock so as to see how the stock inletting matched the receiver, and photograph the inletting.

    However, I was advised that the stock bolt was on too tight to remove with normal tools, so this hasn't happened so far.

    I read in Swearengen's "World's Fighting Shotguns" book, page 263, that Ithaca started producing 20.1" barrelled shotguns (mainly rifle sighted Deerslayer barrels) in 1963, but he doesn't mention anything about Ithaca producing plain receivers - without the waterfowl scenes for these guns at this time.

    So anyone have any idea when the plain receivers were introduced?

    Regarding the Heat Shield - does it look like the real deal??

  11. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    06:02 AM
    I'm wondering if it doesn't look more like it's from the Winchester...1200? No numbers embossed though. It doesn't look like the examples of 37 Ithaca I've seen...I'm wondering if it's just a reproduction...the place where the ventilated shield joins the muzzle attachment seems too short. Between the holes and the end of the sheet steel...
    Regards, Jim

  12. #9
    Legacy Member Tom Doniphon's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Posts
    317
    Local Date
    03-28-2024
    Local Time
    06:02 AM
    Ithaca was making receivers w/o the game scene as far back as WWII. Most of the WWII trench guns have plain receivers. And they were making them in the early 60s too. I think most, if not all, of the Ithaca shotguns shipped to Vietnam in the early 60s had plain receivers. So a plain receiver is not suspect, IMO.

    I'm not sure what this shotgun is. Maybe a Military contract overrun or commercial/law enforcement gun. Maybe a riot gun converted to trench. The stock is definitely strange. The top part of the wrist area does not look like a Stevens to me. It's too arched. The Stevens buttstocks have a straighter wrist to them. But the swivel cut-out does look like a Stevens stock. Maybe someone modified it or it is some sort of replacement stock.

  13. Thank You to Tom Doniphon For This Useful Post:


  14. #10
    Legacy Member navyfastjet's Avatar
    Join Date
    Feb 2012
    Last On
    01-14-2024 @ 05:04 PM
    Location
    South Florida
    Posts
    25
    Local Date
    03-28-2024
    Local Time
    08:02 AM
    Gentlemen / Tom,
    Could you expand more on the markings on the weapon itself? Who would be more inclined to stamp FULL over CYL and insert the "4" (factory marking FULL). Why would Ithaca (the most likely suspect) do this? It supports more of a theory that a factory exigency for shipping to military? Also what is the star stamp near barrel threads?

    It doesn't seem if it started as a CYL (civilian or police) would put factory "4" on.

    The heat sheild looks as weathered and as worn as gun. 6 row 29 hole. I think it's original but placed on after as well. Gun may have started life as riot gun and armorer upgraded in Vietnam?

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. SAVAGE "S" in details, "ILCO butt trap", "P" on bayonet stud,what co. was ILCO?
    By Garandrew in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 11-15-2010, 07:48 PM
  2. Model 37 ITHACA "Bump in the Night" Riot Shotgun
    By Capt Quahog in forum Military Shotguns
    Replies: 3
    Last Post: 04-12-2009, 09:05 PM
  3. US Navy Ithaca Model 37 "Duck Billed shotgun"
    By 442nd in forum Military Shotguns
    Replies: 1
    Last Post: 03-11-2009, 11:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks