-
Legacy Member
The gauge is for use with the "No. 1 Rifle"
Can't remember which manual I got the info from but it lists SM394 as:
SM394 Inspectors, bullet head No. 1 Mk. 1 No. 1 rifle
-
Thank You to nzl1a1collector For This Useful Post:
-
09-29-2013 12:41 AM
# ADS
Friends and Sponsors
-
Legacy Member
A number of the descriptions for the other gauges the vendor is selling aren't right;
There's one for a P14 (SM292) Inspectors, plug compound 0.306in. and 0.3007in. Mk. 1
Another for No. 4 & No. 5 rifle, No. 1 rifles (SM386) Inspectors, slip 0.5 in. Mk. 1
Another for the No. 4 & No. 5 rifle, No. 1 rifles (SM391) Inspectors, plug 0.084 in. Mk. 1
let the bun fight begin.
-
Thank You to nzl1a1collector For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
EMER from 1956
Last edited by Big Ball Bag; 09-29-2013 at 04:40 AM.
-
There's a good chance that if it is for a No1 rifle, then it'll be for the No4 rifle too. However, sometimes the style would change because the bullet lead for the No4 rifle was used on a calibrated GAUGE, armourers, rod. This rid was useful for a number of reasons because............. anyway..., it was!
-
-
Advisory Panel
I should have mentioned that in the photo I recall, the gauge was inserted in the bolt way with the "leg" projecting down between or adjacent to the rear trigger guard screw lugs. For some reason I have the impression in my mind that it, or the one in the photo, was used to check alignment of the bolt way with the chamber.
“There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”
Edward Bernays, 1928
Much changes, much remains the same.
-