+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: 1897 Winchester Trench on Gunbroker

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    drh2687's Avatar
    Join Date
    Jun 2009
    Last On
    @
    Posts
    10
    Local Date
    04-16-2024
    Local Time
    01:00 PM

    1897 Winchester Trench on Gunbroker

    Hello all,

    I've been in the market for a M97 Trench for a while and have done some research, but do not have nearly the level of knowledge and experience of many on this board. In fact, I am self-aware enough to realize that I know JUST enough to be dangerous!

    What are your thoughts on this GB listing? Winchester M97 WWII Trench Gun : Curios & Relics at GunBroker.com


    My gut tells me something smells fishy about it, but I can't put my finger on it. Reblued maybe? My Canfield book is at home (I'm deployed Afghanistan right now) so I don't have ready access to any reference beyond the web.

    Not necessarily going to bid - I don't think I'd be comfortable with that sort of money without inspecting the gun myself - but I'm trying to learn so I don't get burned when the time comes.

    So? Fire away.

    --David
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Sgt. Tom's Avatar
    Join Date
    Nov 2013
    Last On
    09-17-2020 @ 07:46 PM
    Location
    Montana
    Posts
    8
    Real Name
    Tom Winters
    Local Date
    04-16-2024
    Local Time
    01:00 PM
    Is the magazine tube correct? I thought the take-down M97 used a different mag tube than the civilian models.
    Just starting out myself..
    Sgt. Tom

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:12 AM
    Location
    Victoria BC
    Posts
    29,897
    Real Name
    Jim
    Local Date
    04-16-2024
    Local Time
    10:00 AM
    Take down 97s were converted to non takedown when the handguard was added, thus a bit of a different look to the take downs. The hole is there for the locking pin.
    Regards, Jim

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    drh2687's Avatar
    Join Date
    Jun 2009
    Last On
    @
    Posts
    10
    Local Date
    04-16-2024
    Local Time
    01:00 PM
    Thread Starter
    I see it has the takedown pin hole.

    I know that a takedown version is not wrong necessarily and there are many takedown trench guns out there, but does that match up with the 1942 manufacture date listed in the description? I do not know when the takedown models started being used in production.

    Any other thoughts on the authenticity of this thing?

  7. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:12 AM
    Location
    Victoria BC
    Posts
    29,897
    Real Name
    Jim
    Local Date
    04-16-2024
    Local Time
    10:00 AM
    Quote Originally Posted by drh2687 View Post
    I see it has the takedown pin hole.
    Yes it does...I'm not going out on a limb with this one, it looks both good and bad to me too. The blue looks correct to me, if you polish and re-blue, you usually have stretched looking letters and numbers. Dished out screw holes too. The numbers look to match on the front and back. The military marks are always a question with me. The roll marks look good, but the stock mark would be less than stellar in my mind. My little red Winchester book shows that serial number being produced in 1948 though... Tom Doniphon will be along and there are others...they'll give you far more useful info. Just wait for a minute...if you can...
    Regards, Jim

  8. #6
    Legacy Member Tom Doniphon's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Posts
    317
    Local Date
    04-16-2024
    Local Time
    10:00 AM
    That 97 was probably made around July - August 1942. It looks right to me.

  9. Thank You to Tom Doniphon For This Useful Post:


  10. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    swatmaster68's Avatar
    Join Date
    Nov 2013
    Last On
    04-30-2019 @ 10:12 PM
    Location
    PA
    Posts
    7
    Local Date
    04-16-2024
    Local Time
    01:00 PM
    So Tom, you say it looks authentic?

  11. #8
    Legacy Member Tom Doniphon's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Posts
    317
    Local Date
    04-16-2024
    Local Time
    10:00 AM
    Yes, from the photos it looks correct. There's a 3 day inspection period to confirm, among other things, if the finish is original.

  12. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    drh2687's Avatar
    Join Date
    Jun 2009
    Last On
    @
    Posts
    10
    Local Date
    04-16-2024
    Local Time
    01:00 PM
    Thread Starter
    Well, looks like someone is going to be very happy. Albeit with a much lighter wallet. I can't afford that much - I'm gonna have to find one in the low-mid 4k range. That's about the max I can justify on a shotgun, even these.

    Thanks for the input gentlemen - always good to learn what right looks like.

  13. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:12 AM
    Location
    Victoria BC
    Posts
    29,897
    Real Name
    Jim
    Local Date
    04-16-2024
    Local Time
    10:00 AM
    Quote Originally Posted by Tom Doniphon View Post
    July - August 1942
    I don't understand what use my little red Winchester book is then. Maybe none.
    Regards, Jim

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Nice 5.7 Winchester on gunbroker
    By imarangemaster in forum M1/M2 Carbine
    Replies: 34
    Last Post: 09-16-2013, 04:39 PM
  2. A nice Win 1897 trench gun on AA
    By brick26 in forum Military Shotguns
    Replies: 1
    Last Post: 08-27-2011, 09:13 PM
  3. Help with Winchester Trench pls...
    By kagero43 in forum Military Shotguns
    Replies: 5
    Last Post: 08-15-2011, 03:07 PM
  4. Winchester 1897 expert needed (copied from shotgun forum)
    By NORTEXED in forum Gunsmithing for Old Milsurps
    Replies: 1
    Last Post: 03-21-2011, 11:15 AM
  5. Winchester Model 1897 WWI Trench Gun M97
    By sleepla8er in forum Military Shotguns
    Replies: 2
    Last Post: 08-06-2009, 12:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts