I blew up a T99

**seabot2** · 11-26-2013 12:40 PM

Around 1990, a lot of T38s and T99s were being imported from China and they were being sold very cheap, $19 to $50. I bought a few of these hoping to be able to restore them, but the ones I got weren't worth restoring. My friends and I decided to do a blow up test on one T99. This was done at our local shooting range with approval from the rangemaster. The load was a caseful of Unique and a 170 grain lead bullet. The cartridge was chambered and the barrel filled with dirt. Rifle was tied to a rubber tire and covered by a couple of more tires. Trigger pulled by a 100 foot string. Pulled! boompff.. Hardly any noise. Upon inspecting the damage, the receiver survived, there were chips missing on the threads. The barrel jumped out about a thread and the barrel could be hand twisted off the receiver. There was a bulge in the barrel a couple of inches forward of the rear sights. The bullet and all the dirt that was in front of it actually left the barrel ! The bolt face was fused with the brass from the cartridge head, otherwise the bolt was still in locked position in the receiver and took some pounding to remove it. The extractor was bowed a little, but overall the bolt body was intact. The magazine follower and the magazine box was bent out of shape and the stock was broken forward of the grip area. I think a person could have survived shooting this gun in such a condition, maybe as a temporary hospital case. I gave the receiver to a gunsmith who used it on a .22 single shot gun project.

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 11-26-2013 12:40 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**WarPig1976** · 11-26-2013 01:43 PM

Oddly enough I don't know how to feel.. On one hand I admire your quest of knowledge and you sharing the results... But, on the other hand I would like to see you beaten with a Bamboo cane by a Japanese icon

veteran for breaking his rifle......Repeatedly....

No metal or wood fragments? That's good. Bet if someone was holding it though he'd have got knocked on his arse from the concussion.

**Mikesm44** · 11-26-2013 01:55 PM

pics or it didn't happen.

**seabot2** · 11-26-2013 07:47 PM

I wish I had taken pictures of the aftermath, but unfortunately I didn't. I kept the damaged receiver for a few months on my work desk and after that I got tired of looking at it. At a local gun show I met a gunsmith who was interested in a T99 receiver to build a .22LR single shot rifle. I gave it to him .