+ Reply to Thread
Results 1 to 4 of 4

Thread: Mk II load data?

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    @
    Location
    UK / South Africa
    Posts
    942

    Mk II load data?

    Can anyone advise a load for me from a programme?

    I want to replicate the Boer War - era .303 round, for use in my MLE, LEC, and ME rifles.
    AFAIK, the Mk II .303 had a 215 grain jacketed bullet at a muzzle velocity of 1970 fps (quite similar to the Mk VI bullet (2060 fps)).
    I am planning to buy 215 grain round nosed jacketed .303 bullets, and I need a recommended powder load which will give 1970 fps muzzle velocity from the Long Lee (barrel length: 30.2 inches).
    I use the Vihtavuori powders, and have N140, N150 and N160 to hand. Lapua/Vihtavuori do not include a 215 grain .303 bullet in their load tables.
    Can anyone assist?

  2. #2
    Advisory Panel Parashooter's Avatar
    Join Date
    Dec 2008
    Last On
    @
    Location
    Connecticut
    Age
    79
    Posts
    678
    Cartridge : .303 British x .312
    Bullet : .312, 215, Woodleigh RN SN 68
    Cartridge O.A.L. L6: 3.075 inch or 78.11 mm
    Barrel Length : 30.0 inch or 762.0 mm

    Predicted Data for Indicated Charges of the Following Powders.

    Matching Muzzle Velocity: 1970 fps or 600 m/s

    These calculations refer to specified settings in QuickLOAD 'Cartridge Dimensions' window.
    C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested
    loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand
    that all of the listed powders can be unsuitable for the given combination of cartridge, bullet
    and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations.
    USE ONLY FOR COMPARISON !

    Powder Fill Charge Charge Vel. Burnt P max P muzz B_Time
    Type....%...Grains.Grams..fps....%...psi...psi.... ms
    --------------------------------------
    Vihtavuori N150 78.2 33.2 2.15 1970 98.1 26882 4621 2.051
    Vihtavuori N140 72.3 31.3 2.03 1970 99.4 27614 4384 2.037
    Vihtavuori N160 90.2 38.9 2.52 1970 85.0 27331 4907 2.032

    As you can see from the "Burnt" column, N140 appears the most efficient choice of the 3 powders listed.

  3. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    @
    Location
    UK / South Africa
    Posts
    942
    Superb; many thanks.
    31.3 grains of Vihtavuori N140 should do nicely.
    Rob

  4. #4
    FREE MEMBER
    NO Posting or PM's Allowed

    Join Date
    Jun 2013
    Last On
    @
    Location
    New Zealand
    Posts
    651
    I dont have anything on the "'N's" but for 215gr (woodleigh weldcore).

    IMR4320 36gr = 2003fps
    IMR4350 39.5gr = 1952fps
    Re19 40gr = 1927fps

    These are min loads.
    Last edited by ssj; 01-20-2015 at 03:19 PM.

+ Reply to Thread

Similar Threads

  1. Need .401 Wsl Load Data
    By Bill H in forum Ammunition and Reloading for Old Milsurps
    Replies: 14
    Last Post: 08-21-2018, 02:48 PM
  2. 7.7 japanese load data
    By surpman1911 in forum Ammunition and Reloading for Old Milsurps
    Replies: 5
    Last Post: 04-22-2014, 08:29 PM
  3. 6.5 jap load data
    By Tahunua001 in forum Ammunition and Reloading for Old Milsurps
    Replies: 7
    Last Post: 03-21-2013, 06:26 AM
  4. Krag load data
    By andiarisaka in forum Krag Rifles
    Replies: 1
    Last Post: 10-16-2012, 03:53 PM
  5. 577/450 load data
    By 762shooter in forum Ammunition and Reloading for Old Milsurps
    Replies: 7
    Last Post: 05-12-2009, 02:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts