+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16

Thread: 1903-a4 Scope Question...

Click here to increase the font size Click here to reduce the font size
  1. #11
    Legacy Member 728shooter's Avatar
    Join Date
    Dec 2014
    Last On
    03-06-2024 @ 04:39 PM
    Location
    South Florida
    Posts
    74
    Local Date
    03-28-2024
    Local Time
    10:57 AM
    Thread Starter
    Quote Originally Posted by JGaynor View Post
    Thanks for the additional pictures.
    Two more questions: Is there a punch mark on the underside of the barrel (6 o'clock) roughly centered between the front sight cuts? How many grooves are there in the barrel?

    One suggestion. Loosen the three screws that clamp the scope tube and slide the scope tube forward. Leave about a 1/16" clearance between the front edge of the data plate and the back of the rear ring.

    Your rifle was undoubtedly used and subsequently rebuilt at Rock Island Arsenal. The 9/43 barrel is in all likelihood the original as is the keystone scant stock with factory inspection stamps. I agree this rifle is most likely a DCM sales rifle.

    i would not pay any mind to the assertions that there are "no records anywhere".
    Jim --
    Thank you very much for the reply and the suggestions. I did move the scope forward as you mentioned and agree, the eye-relief is much more comfortable and more "natural" feeling.

    As to the punch mark, I did look carefully where you mentioned and yes, there is a faint punch-mark at about the 5 o'clock position! Never noticed this before, but then again, you guys are the experts and that's what I'm here to learn about. What exactly does this mark mean? My guess is its an arsenal rebuild mark? And the barrel is a 4-groove barrel and mirror-shiny. I don't have a muzzle gauge to measure it but I don't have any doubts that it is within tolerances.

    Is there any way to determine if this is in fact a DCM sales rifle? And if so, does that take away anything from its value? Its getting to sound more like the "no records anywhere" may have been just a bit of hype by "Uncle Whoever", only adding to the mystique of its origin, I guess.....

    --728shooter

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Advisory Panel
    JGaynor's Avatar
    Join Date
    Dec 2008
    Last On
    03-07-2024 @ 10:07 AM
    Location
    Northern New Jersey
    Posts
    887
    Local Date
    03-28-2024
    Local Time
    10:57 AM
    The punch mark. Remington was required to select rifles for "accuracy and smoothness of operation". Remington management decided they would address the accuracy requirement by air gauging the barrels and maintaining control of the uniformity of the final ream dimension.
    I suspect the punch mark was how they identified approved A4 barrels in the plant.
    Last edited by JGaynor; 03-05-2015 at 11:51 AM.

  4. Thank You to JGaynor For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #13
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    03-28-2024
    Local Time
    11:57 AM
    If you go to the CMPicon website, you can find their phone number & ask if they any record of your rifle's SN. DCM was the predecessor to CMP, but I don't know if DCM sales were added to CMP's data base. If they have a record of your rifle, they will send you written verification for $5.

    DCM/CMP paperwork actually adds to the value of a rifle, as there are quite a few "restored" & fake A4's out there.

    Neal

  7. Thank You to Neal Myers For This Useful Post:


  8. #14
    Legacy Member TFLeader's Avatar
    Join Date
    Aug 2010
    Last On
    02-13-2024 @ 02:14 AM
    Location
    EMass
    Posts
    3
    Local Date
    03-28-2024
    Local Time
    11:57 AM

    M73B1 Scope

    Quote Originally Posted by 728shooter View Post
    Hello to all from a relative "Newbie" to this site. Really impressed by all the threads I've been reading. Have a question regarding the scopes used on the 1903-a4's....

    Recently acquired a very nice 1903-a4 from a family member of a WWII (or Korean War?) vet. Rifle looks as if it was never issued and has a rather rare "Z" prefix serial number, which according to info I've read, dates it to Jan-Feb '44 manufacture or issue. Rifle came with original staked Redfield scope mount, but no scope or rings. Have acquired correct 3/4" scope rings and am trying to figure out which scope was originally issued with this rifle.

    I understand that the Weaver model 330-C, which was a commercial model, was originally selected as the scope for this rifle, and was later assigned the military designation M73B1. I have read that early Weaver scopes for this rifle were marked either model 330-C, M73B1, or even model 330 M-8. However, the models 330-C that I have seen have adjustment knobs that were friction-locked, whereas the military specs required "click-adjustments", which only the model 330-M 8 has. I assume that the M73B1 is the same.

    My questions are; Is the model 330 M-8 the correct "early" scope used on the 1903-a4? At what point in time were all Weaver scopes marked M73B1? Given the manufacture dates of the rifle I mention, what was the correct scope for it at that time? And at what point in time did the Lyman Alaskan take over as the standard military issue sniper scope in WWII for the 1903-a4? I have a chance to buy an Weaver 330 M-8 and want to make sure it's correct for this rifle.

    Thanks to all for any & all input. --728shooter
    Anyone have ananswer to this queston?

    I have similar situation.

    Thanks!

  9. #15
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 11:33 AM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    09:57 AM
    yes, go back and read the responses ,
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  10. #16
    Legacy Member daveboy's Avatar
    Join Date
    May 2009
    Last On
    03-07-2024 @ 08:21 PM
    Location
    Alabama
    Posts
    208
    Real Name
    david
    Local Date
    03-28-2024
    Local Time
    11:57 AM

    My 330 on my A4

    My A4 is one purchased from the DCM. I bought it many years later after it had sat in a closet for decades. It had the scope mount and rings, but no scope.
    I purchased the civilian Weaver 330 with the friction adjustments.
    I've heard so many things, one way or another, on whether these scopes were issued with this rifle, or not. I'm of the opinion that some were. The stock was horrible, so I put a CMPicon stock on it.

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Similar Threads

  1. 1903 scope mount
    By tomhall in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 10-01-2012, 10:59 PM
  2. Question for Peter Laidler - No 32 Scope v No 42 Scope
    By paulseamus in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 03-09-2012, 04:44 PM
  3. 1903 scope base
    By 195Pilot in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 02-28-2011, 10:54 PM
  4. scope identification ? used on 1903??
    By duggaboy in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 5
    Last Post: 05-03-2009, 11:21 AM
  5. 1903-a4 scope rings
    By duggaboy in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 05-02-2009, 09:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks