+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: Springfield Trapdoor Bannerman Special - Might be a Shooter

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    dttuner's Avatar
    Join Date
    Feb 2015
    Last On
    10-15-2017 @ 06:52 AM
    Location
    NJ
    Posts
    86
    Local Date
    03-28-2024
    Local Time
    09:57 PM

    Springfield Trapdoor Bannerman Special - Might be a Shooter

    So I this little mutt has only been in my hands since last night. However I'm beginning to think she is a shooter due to condition of action and barrel.
    Action locks-up tight. No wiggle in the lock either open or closed. Firing pin is free, and no sign of strain or cracks anywhere in the trapdoor joint.
    Trigger wiggles front-to-back a little (normal ?).
    Best part of the mechanics is inside the barrel looks like a mirror, and rifling is very nice.

    I'm trying to understand more about this rifle, and it's quirks.
    If you know anything about these oddball parts, how to check for issues, or what I should do next, please leave a comment.
    Thanks!

    Year of Manufacture: Unknown (1889-1990 ???)
    Caliber: unknown
    Action Type: Single Shot Trapdoor
    Markings:
    Large "L" and "15" stamped on top of the receiver.
    The barrel at the 12 o'clock position, near the receiver is marked "A"
    The barrel at the 6 o'clock position, near the reciever is marked "P Y S" or "P V S" with a strange symbol near the P
    The barrel ahead of the trap door is stamped with “V” over “P”, an eagle head, and another “P”
    Bottom of receiver is marked "A" and what looks like a metal plug.
    The Left side of the receiver is stamped “N.J”.
    The trapdoor is stamped “US / SPRINGFIELD / 1873”
    Behind the trap door on the receiver is the serial number “479952”.
    The lock plate is marked with a single "C”.
    The top of the buttplate is stamped “U.S.”.
    The barrel bands are both marked with a “U”.
    Barrel Length: Unknown
    Sights / Optics: Buckhorn rear sight and fixed post front sight.
    Stock Configuration & Condition:
    Type of Finish: Possibly bright
    Finish Originality: Unknown.
    Bore Condition: The bore is shiny and the rifling is worn but is still serviceable. There is no rust or erosion.
    Overall Condition: The Screw heads are serviceable with only slight disfiguration. The markings are faint in some areas and strong in others.
    Mechanics: The action functions correctly, and locks-up tight with no wiggle. Have not fired this rifle.

    Issues -
    Stock - particularly that it's been cut just under the Buckhorn rear sight. To fix I'll probably need to reinforce the tweo pieces with a steel rod, and epoxy/glue together in a vice.
    Since it's a no cartouche, no barrel bands stock, although beautiful, I feel I can complete the repair myself guilt-free. Both barrel bands hold on only with friction.
    The trigger guard was removed, and an odd sling mount was installed at some point.

    Tons of pics incoming!






    Looks like a spoon-shaped spring. What is this?



    Perhaps this was originally a bright finish trap door.


    Barrel marking near receiver


    Left side of receiver






    Almost the entire length of barrel, which was hidden behind stock, has a bright finish.



    Someone tried to hold stock together with two small nails. Rifle was a decoration for years.


    Notice gap on the rear base of trigger guard due to after-thought sling mount.









    Haven't cleaned the breach or barrel yet.
    Looks crisp and undamaged.


    The only marking on the Lock plate "C"

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by dttuner; 02-14-2015 at 11:57 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member m1903rifle's Avatar
    Join Date
    Mar 2009
    Last On
    03-04-2024 @ 02:45 PM
    Location
    Knoxville,TN
    Age
    79
    Posts
    376
    Local Date
    03-28-2024
    Local Time
    08:57 PM
    Serial number would appear to be too high for a Bannerman.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    03:57 AM

    Model 1878, but...

    "Year of Manufacture: Unknown (1889-1990 ???)"

    Well it seems to be the

    US
    Model
    1878

    - you can just make out the marking on the block! ´See Frasca/Hill "The 45-70 Springfield" p.158.

    Serial number is 479952
    - produced in 1890
    1889 ended at 470246
    1890 ended at 502492
    so linear interpolation suggest a date of manufacture March-April 1890.

    BUT this number would have been a Model 1884, and the Buffington sight had long been introduced (1885).
    So I suspect this is some kind of mixture.

    Maybe a real Trapdoor expert can say something about the markings?

    P.S: the band is the wrong way around. The U (= UP) must be so that it is the right way up when the rifle is racked.

    P.P.S: The spoon-shaped spring in the barrel channel provides friction to hold the ramrod in place.

    P.P.P.S: Pages183-185 of Frasca/Hill list typical points to be checked on dubious Springfields. Note the 1890 "Lovell Specials" - that may be what you have acquired.

    I would not be bothered by all this if the rifle is a good shooter. However, should you one day be inclined to pay serious money for a supposedly original Trapdoor, get the book first!
    Last edited by Patrick Chadwick; 02-15-2015 at 09:54 AM.

  6. Thank You to Patrick Chadwick For This Useful Post:


  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    dttuner's Avatar
    Join Date
    Feb 2015
    Last On
    10-15-2017 @ 06:52 AM
    Location
    NJ
    Posts
    86
    Local Date
    03-28-2024
    Local Time
    09:57 PM
    Thread Starter
    Quote Originally Posted by Patrick Chadwick View Post
    "Year of Manufacture: Unknown (1889-1990 ???)"

    Well it seems to be the

    US
    Model
    1878

    - you can just make out the marking on the block! ´See Frasca/Hill "The 45-70 Springfield" p.158.

    Serial number is 479952
    - produced in 1890
    1889 ended at 470246
    1890 ended at 502492
    so linear interpolation suggest a date of manufacture March-April 1890.

    BUT this number would have been a Model 1884, and the Buffington sight had long been introduced (1885).
    So I suspect this is some kind of mixture.

    Maybe a real Trapdoor expert can say something about the markings?

    P.S: the band is the wrong way around. The U (= UP) must be so that it is the right way up when the rifle is racked.

    P.P.S: The spoon-shaped spring in the barrel channel provides friction to hold the ramrod in place.

    P.P.P.S: Pages183-185 of Frasca/Hill list typical points to be checked on dubious Springfields. Note the 1890 "Lovell Specials" - that may be what you have acquired.

    I would not be bothered by all this if the rifle is a good shooter. However, should you one day be inclined to pay serious money for a supposedly original Trapdoor, get the book first!
    What a great response! Thanks so much!

    "1890 Lovell Specials" - awesome, now I have another lead to hunt down on the internet
    "Frasca/Hill "The 45-70 Springfield"" - looking for this book as we speak. thanks.
    "P.S: the band is the wrong way around. The U (= UP)" - Thanks for this. Oops.
    "P.P.S: The spoon-shaped spring in the barrel channel provides friction to hold the ramrod in place." - ahh, got it.

    This particular rifle was purchased for very little money, from a friend of a friend. I figured I couldn't go wrong.
    In fact, if this can be shot (after much research, and verification by a gunsmith) I'll see the purchase as a windfall.
    Prefer shooting a "beater" to wear-out, and learn about Springfield Trapdoors. Playing with, researching, and hopefully one day shooting this rifle will surely get me hooked on Springfield Trapdoors, and also motivate me to get a 45-70 reloading setup. Once the 45-70 foundation is in place, I'm going to want an original Trapdoor. No doubt about it.
    My father in law has a really nice, all original Trapdoor which was gifted to him by a close family friend, and former WWII Army Colonel. Makes me wanna fly out to see the in-laws ASAP! =P

    Additional characteristics of the gun:
    - Hammer/Action only has 2 clicks. Half-cock, and Full-cock.

    edit - Wow, best price for the two "Frasca/Hill, The 45-70 Springfield" books is $120?!?
    Books
    Last edited by dttuner; 02-15-2015 at 10:13 AM.

  8. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    03:57 AM
    "Stock - particularly that it's been cut just under the Buckhorn rear sight. To fix I'll probably need to reinforce the tweo pieces with a steel rod, and epoxy/glue together in a vice.
    Since it's a no cartouche, no barrel bands stock, although beautiful, I feel I can complete the repair myself guilt-free. Both barrel bands hold on only with friction."


    Since there are quite a few "duffle-cut" milsurp bringback rifles in the US, the rejoining of cut stocks has been handled more than once in the Restorer's forum - dig around a bit!

  9. Thank You to Patrick Chadwick For This Useful Post:


  10. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    dttuner's Avatar
    Join Date
    Feb 2015
    Last On
    10-15-2017 @ 06:52 AM
    Location
    NJ
    Posts
    86
    Local Date
    03-28-2024
    Local Time
    09:57 PM
    Thread Starter
    Quote Originally Posted by Patrick Chadwick View Post
    "Stock - particularly that it's been cut just under the Buckhorn rear sight. To fix I'll probably need to reinforce the tweo pieces with a steel rod, and epoxy/glue together in a vice.
    Since it's a no cartouche, no barrel bands stock, although beautiful, I feel I can complete the repair myself guilt-free. Both barrel bands hold on only with friction."


    Since there are quite a few "duffle-cut" milsurp bringback rifles in the US, the rejoining of cut stocks has been handled more than once in the Restorer's forum - dig around a bit!
    You know i searched there really quick, during work, to see if I could find a good example, but didn't see anything.
    Will dig a little deeper. Thanks!

  11. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    dttuner's Avatar
    Join Date
    Feb 2015
    Last On
    10-15-2017 @ 06:52 AM
    Location
    NJ
    Posts
    86
    Local Date
    03-28-2024
    Local Time
    09:57 PM
    Thread Starter
    Found this great "duffle cut" fix thread:
    Milsurps Knowledge Library - Repairing a K98k duffle cut

  12. #8
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    03:57 AM
    "- Wow, best price for the two "Frasca/Hill, The 45-70 Springfield" books is $120?!? "

    Grit your teeth and get'em. They're not going to get cheaper.

    As to your "duffle-cut" stock. In most cases, the perpetrator was bright enough to make the cut underneath the band, so that it would be hidden after re-assembly. In this case, this rifle suffered at the hands of a real Bubba.

    Don't worry, it can be fixed:

    https://www.milsurps.com/showthread....ghlight=Monkey

    Encouraging?
    Last edited by Patrick Chadwick; 02-15-2015 at 04:18 PM.

  13. Thank You to Patrick Chadwick For This Useful Post:


  14. #9
    Legacy Member m1903rifle's Avatar
    Join Date
    Mar 2009
    Last On
    03-04-2024 @ 02:45 PM
    Location
    Knoxville,TN
    Age
    79
    Posts
    376
    Local Date
    03-28-2024
    Local Time
    08:57 PM
    No such thing as a M1878 Trapdoor. The block is actually marked 1873 ..... the later M73 blocks were interchangeable with the M84 blocks, and were installed until they ran out of them. The receiver is actually a M84 receiver. The rear sight appears to be a M1879 Carbine sight ( marked with a "C" on the side ).

  15. Thank You to m1903rifle For This Useful Post:


  16. #10
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    03:57 AM
    "The rear sight appears to be a M1879 Carbine sight ( marked with a "C" on the side )."
    Agreed. See Frasca/Hill p.84.


    "The block is actually marke"d 1873"
    You may well be right, but...


    1) The last figure could be a 3" or an 8. Perhaps dttuner can clarify this? I thought it was an 8.

    2) I am aware that there was no such thing as an "official" Model 1878. But, as the authors point out, there were numerous in-between versions.
    On the page I cited the 4th breech block from the left appears to be marked US Model 1878. Maybe it's just my poor eyesight?
    This version/edition/variation, call it what you like if you don't like the word Model - although that is what is stamped on it - has the rounded shoulder of the 1884 version. The versions clearly marked 1873 all have square shoulders.

    3) In any case, the rifle appears to be a mixture. The stock appears to be made for a rifle with screw-clamp bands, hence the lack of band springs.

    4) As the unfortunate object is way off being a "correct" collector's item, surely dttuner's first priority is to get it going as a shooter?
    Last edited by Patrick Chadwick; 02-16-2015 at 04:41 AM.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 1873 Springfield Trapdoor 45/70
    By invaliduser in forum Other U.S. Service Rifles
    Replies: 2
    Last Post: 11-03-2014, 09:06 AM
  2. Springfield Trapdoor
    By coneten in forum Other U.S. Service Rifles
    Replies: 1
    Last Post: 09-27-2011, 10:03 PM
  3. 1866 Springfield Trapdoor
    By ei276b in forum Black Powder
    Replies: 3
    Last Post: 03-20-2011, 04:56 PM
  4. Trapdoor springfield barrel
    By CapnJohn in forum Other U.S. Service Rifles
    Replies: 3
    Last Post: 03-01-2011, 03:21 PM
  5. Springfield Trapdoor Bayonet
    By vman in forum Edged Weapons Forum
    Replies: 4
    Last Post: 03-16-2009, 05:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks