+ Reply to Thread
Results 1 to 1 of 1

Thread: Canadian 1944 dated HSDR / HSAT Conversion

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Kozowy1967's Avatar
    Join Date
    May 2015
    Last On
    11-04-2016 @ 08:36 AM
    Location
    Vancouver Island
    Posts
    13
    Real Name
    Mark Kozowy
    Local Date
    03-28-2024
    Local Time
    06:11 PM

    Canadian 1944 dated HSDR / HSAT Conversion

    There is very little published information out there concerning this type of conversion and most of that can be found is in the book by Roger Lucy Tin Lids In the late 1940's and early 1950's as Canadaicon began to rebuild her Airborne forces and the Mobile Strike Force. They had enough Britishicon AB helmets for the PPCLI, but the RCR and R22R did not have helmets.There was an extreme shortage of Mk II Airborne helmets and needing to out fit two other Army groups the decision was made to convert existing Mk I DR helmets that were in military stores to meet the expanding need.
    The HSDR's were turned 180° so the brow pad became a neck support the skirting was cut off ,dome pads were some times added as well, the shells were drilled out to accommodate new leather harnesses in the Mk I configuration the requirement had been for 500 of these converted AB helmets but it is possible that they converted some more the exact number is not known.
    The helmet body is dated to 1944 and was produced by Canadian Motorlamp Company ( C.L./C. ) and bares there stamp in the interior low on the skirt near the rim .
    The liners were manufactured by Backstay Standards ( BS ) and bare there company logo and date and can be found marked with the C-Broad arrow Canadian government acceptance stamp on the reverse of the sweat band and in the helmet body .
    This example was originally sporting three British wartime produced camo nets applied to the exterior of the shell when found but at time of resale was only offered with one example as part of the deal with the seller .
    The rim has been wrapped with a strip of rubber this could have been applied to protect the rim and or to tuck the nets under to help keep them better secured as well as having a strip of inner tube applied half way down the shell to help keep the nets in place.
    IMO the harness looks to be well used as is evident in the chin cup and adjacent pull strap and the copper and brass bolts,fittings and rivets are starting to show the signs of green verdigris which tells me that the harness has some genuine age to it.
    It has been speculated that they were either WW II British surplus and or post war Canadian produced this particular harness had me scratching my head some as I could not find an exact match when comparing the style placement and configuration of the rivets and the grommets .
    So after discussing this particular harness with a few other Canadian collectors that have examples in there collections it was decided that do to the similarities in construction it was indeed a Canadian Army Depot produced example.

    Regards Mark
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

+ Reply to Thread

Similar Threads

  1. re: Why no Canadian No.4 MK1/2 Trigger conversion
    By x westie in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 05-04-2012, 02:43 AM
  2. 1944 Canadian Telescope, Observing, Sniper's Cmk1
    By CRL in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 06-13-2011, 08:37 PM
  3. 1944 dated Wire cutters
    By JimF4M1s (Deceased) in forum Edged Weapons Forum
    Replies: 1
    Last Post: 02-20-2010, 11:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks