+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: my L2A3

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 01:25 PM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    12:27 PM

    my L2A3

    Afternoon all,

    Though I would post some pics of my L2A3, shes ex NZicon as many appear to be on the UKicon market.

    Old spec deactivated in 1989 by Charnwood Ordnance, they used to do a very sympathetic deactivation as a company, this one is no different an has been done with great care.

    I bought her a few years ago in a rather sorry cosmetic condition and resorted her for my collection.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 6 Members Say Thank You to mrclark303 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-28-2024
    Local Time
    05:27 AM
    WOW!!!! That looks awesome!

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 01:25 PM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    12:27 PM
    Thread Starter
    Cheers Vincent, always had a soft spot for the trusty old SMG and glad I got her when I did.

  7. Thank You to mrclark303 For This Useful Post:


  8. #4
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    01:27 PM
    If I remember correctly, Ordnance made available the steel sling loop from the rear of the return spring cap. They were a two part item, ready shaped to fit with a male and female end that joined together externally. Then the the other ends slipped in the opening of the return spring cap. The M&F parts were brazed together, made good and sent through the phosphate plant. We also used these replacement sling loops on the Navy Lanchesters that came through the workshop

    Lots of other casing bits that weren't usually available as spare parts were available to us including finger guards and foresight protectors. Great little guns - the Rolls Royce of SMG's.

    As a matter of interest......... Now you know that I'm going to go off at a tangent..... Before he perfected the sharp chiselled helical ribs on the breech block, George Patchett inserted captive ball bearings in places radially around the front and rear of the (believed to be ex Lanchester) breech blocks he was experimenting with. This was initially to reduce the friction of the reciprocating breech block. It was moderately successful in that it did indeed reduce the reciprocating friction but GENERATED friction in the recesses that housed the rotating(?) balls. What finally ended this small trial was that the reciprocating balls wore grooves along the inside walls of the casing where they ran. To be honest, and sorry to say it George, you'd thought he'd have foreseen that!

  9. The Following 3 Members Say Thank You to Peter Laidler For This Useful Post:


  10. #5
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-28-2024
    Local Time
    05:27 AM
    Thanks Peter. I always learn something when you go off at a tangent.

    I came across one of those replacement sling loops when I was converting an endcap to a spigot type for the plastic butt. I wasn’t sure if the loop was a repair or a change in manufacturing. Now I know it was a repair.

    By the way, I think I might have come across a contender for the Mk4 Sterling that has fired the most rounds. It’s a gun range rental. On average about 2,500 rounds are put through it every week and about twice that much on holiday weekends. This has been going on for over ten years now. It has had the barrel replaced and the return springs. Other than that, it hasn’t had any other repairs. The gunsmith told me he thought it is a remarkably reliable SMG. To make his point he showed me three worn out MP5 receivers.

  11. #6
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 01:25 PM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    12:27 PM
    Thread Starter
    They really are beautify and very strongly made SMG's, its a natural evolution of the Sten layout, I should imagine anyone handing in their issued Sten mk5 for a Sterling back in the 50's/60's, must have felt immediately at home with it.

    Just glad I have an example in the collection, even if its deactivated.

  12. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    01:27 PM
    The L2's ancestry is from the Lanchester. I think both the Lanchester and a slightly lesser extent the L2 were gentlemanly guns to shoot. Strange that you say you've learned things from my wandering off at a tangent antics Vince......... A few people have suggested otherwise. That's why I now pre-empt these going off at a tangents with 'As a matter of interest...........' But you can't please all the people all the time. Was it Bob Dylan who said that?

  13. #8
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-28-2024
    Local Time
    11:27 AM
    I always thought the Rolls Royce of SMG,s was the Lanchester ? brings back a few memories all the talk of the Lanchester and Sterlings...... a few of many of my old Deact collection (all old spec), think the icing on the cake was the Vickers in the corner of the living room..... still I got a good deal when I sold them, if the Lanchester had of had a Walnut stock then I think it would still be with me today

    Still the money went on good things........ Enfield's that went bang so not a bad trade.

    Time to slip into something comfortable and go in to the workshop and hold the Sten I think.

  14. #9
    Legacy Member tankhunter's Avatar
    Join Date
    Apr 2010
    Last On
    06-28-2023 @ 05:15 PM
    Location
    UK
    Posts
    1,054
    Real Name
    Mike
    Local Date
    03-28-2024
    Local Time
    06:27 AM
    Time to slip into something comfortable and go in to the workshop and hold the Sten I think.[/QUOTE]

    You Filthy Beast Geoff !!!....

  15. #10
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 01:25 PM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    12:27 PM
    Thread Starter
    Quote Originally Posted by Peter Laidlericon View Post
    If I remember correctly, Ordnance made available the steel sling loop from the rear of the return spring cap. They were a two part item, ready shaped to fit with a male and female end that joined together externally. Then the the other ends slipped in the opening of the return spring cap. The M&F parts were brazed together, made good and sent through the phosphate plant. We also used these replacement sling loops on the Navy Lanchesters that came through the workshop

    Lots of other casing bits that weren't usually available as spare parts were available to us including finger guards and foresight protectors. Great little guns - the Rolls Royce of SMG's.

    As a matter of interest......... Now you know that I'm going to go off at a tangent..... Before he perfected the sharp chiselled helical ribs on the breech block, George Patchett inserted captive ball bearings in places radially around the front and rear of the (believed to be ex Lanchester) breech blocks he was experimenting with. This was initially to reduce the friction of the reciprocating breech block. It was moderately successful in that it did indeed reduce the reciprocating friction but GENERATED friction in the recesses that housed the rotating(?) balls. What finally ended this small trial was that the reciprocating balls wore grooves along the inside walls of the casing where they ran. To be honest, and sorry to say it George, you'd thought he'd have foreseen that!
    Plus one for your off tangent lessons Peter, always something to learn, I always assumed the breechblock ribs were developed for the same reason as the L1A1 sand cuts. It didn't occur to me it was a friction reducing measure.

    Keep em coming!

    ---------- Post added at 08:19 AM ---------- Previous post was at 08:13 AM ----------

    Quote Originally Posted by tankhunter View Post
    Time to slip into something comfortable and go in to the workshop and hold the Sten I think.
    You Filthy Beast Geoff !!!....[/QUOTE]

    I can see it now Geoff, a nice bottle of wine, lights turned down low, Barry White on the stereo raw linseed massage oil and not forgetting the Suncorite cocktails!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Sterling Mk4 / L2A3 Return Springs
    By Vincent in forum Other LMG/HMG and SMG Forum
    Replies: 0
    Last Post: 04-12-2016, 10:01 AM
  2. L2A3 Trigger Pack.
    By Brit plumber in forum Milsurps General Discussion Forum
    Replies: 0
    Last Post: 02-06-2015, 04:13 PM
  3. L2A3 Markings
    By Vincent in forum Milsurps General Discussion Forum
    Replies: 8
    Last Post: 10-20-2012, 04:27 AM
  4. Sterling Mk 4 (L2A3) Bayonet advice
    By grant580 in forum Other LMG/HMG and SMG Forum
    Replies: 9
    Last Post: 08-22-2011, 11:54 AM
  5. Sterling L2A3 Wrinkle Finish Paint
    By Stanleyrf89 in forum Other LMG/HMG and SMG Forum
    Replies: 24
    Last Post: 08-10-2011, 02:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks