+ Reply to Thread
Results 1 to 8 of 8

Thread: Just returned from Hawaii gun show

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    442nd's Avatar
    Join Date
    Mar 2009
    Last On
    01-11-2015 @ 11:01 PM
    Posts
    22
    Local Date
    04-19-2024
    Local Time
    07:08 PM

    Smile Just returned from Hawaii gun show

    Was a worthwhile trip, found some interesting military shotgun items at a good price.

    got 2 sealed cans of military no.9 chilled shot rounds @ $60 per can, packed 10 rounds per box, dated mar 72. manufactured by WCC Olin. does anyone know what they used these rounds for? skeet? combat? are the worth keeping? how much are they worth? or should I just shoot them aff at the range for practice?

    I also found an original winchester model 97 trenchgun heat shield / bayonet lug, it was blued about 80+% finish, some light rust, 4 hole and with a "W" proof mark. guy wanted to sell me it with a feed tube complete with pump assembly. I passed on the assembly but got the heat shield at a discount... It cost me a whopping $45.00. the only bad thing about this heat shield is that the screws were missing. does anyone have the screws? or what would a suitable replacement be?

    thanks in advance!

    442nd
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member James B.'s Avatar
    Join Date
    Mar 2009
    Last On
    02-20-2022 @ 08:39 AM
    Posts
    16
    Local Date
    04-19-2024
    Local Time
    09:08 PM

    Just don't open the cans!

    442nd
    I don't know just what they were useing #9CS for as late as Vietnam era. In WWII they were used for training purposes, mostly aerial gunner training as most of these guys had never held a gun before much less did they have an idea how to lead a target. At $60 per can I'd say you probably did pretty well. How many rounds per can? Can you post some pics. or tell us the markings on the cans? Those are genuine military collectables and to the right person probably worth alot more than you paid. Before you open them, if you don't care to keep them, try posting a can on Gun Broker and see what they would bring. Hey, I'd be interested. Just don't use them for blasting.
    Are they really sealed spam cans or 50 cal. cans like most other Vienam era shells?
    James B.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    442nd's Avatar
    Join Date
    Mar 2009
    Last On
    01-11-2015 @ 11:01 PM
    Posts
    22
    Local Date
    04-19-2024
    Local Time
    07:08 PM
    Thread Starter
    Quote Originally Posted by James B. View Post
    442nd
    I don't know just what they were useing #9CS for as late as Vietnam era. In WWII they were used for training purposes, mostly aerial gunner training as most of these guys had never held a gun before much less did they have an idea how to lead a target. At $60 per can I'd say you probably did pretty well. How many rounds per can? Can you post some pics. or tell us the markings on the cans? Those are genuine military collectables and to the right person probably worth alot more than you paid. Before you open them, if you don't care to keep them, try posting a can on Gun Broker and see what they would bring. Hey, I'd be interested. Just don't use them for blasting.
    Are they really sealed spam cans or 50 cal. cans like most other Vienam era shells?
    James B.
    the cans are 50 cal type cans, packed 120 rounds per can(10 boxes wrapped in VCI packaging), markings are as follows:
    120 CARTRIDGES
    12 GAGE, SHOTGUN
    PLASTIC
    NO. 9 CHILLED SHOT
    2 3/4 DRAM
    LOT WCC-30-6002

    I did talk to a Navy Vietnam Veteran today, He was in the "Brown Water Navy" It was interesting in that he showed me photos of himself on a PBR he was assigned to. He was holding an Ithaca Model 37. I asked him for a copy of the photo and will post it when I get it. He went on to say that he recognizes this ammo and was issued some for use with an Ithaca model 37 "Duck Billed shotgun" I dont know what a "Duck Billed shotgun" is... Looked for reference to it but could not find any... any clues? I thought that all the service shotgun ammo that they were issued were 00 buck?

  6. #4
    Legacy Member James B.'s Avatar
    Join Date
    Mar 2009
    Last On
    02-20-2022 @ 08:39 AM
    Posts
    16
    Local Date
    04-19-2024
    Local Time
    09:08 PM
    A Duck Billed Shotgun I believe is another term for a shot diverter. This is a device which looks somewhat like a flash hider of sorts and is designed to spread the shot pattern lateraly to increase hit probability. Didn't work too well in the real world and I think actually decreased hit performance.
    I can't see anyone in a combat role being issued #9cs without pitching a fit. 00B was standard issue with some Marines getting #4B and maybe a few flechettes. Interesting though, full cans of Vietnam era shells are hard to find.

    James B.

  7. #5
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 09:20 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,153
    Real Name
    chuck
    Local Date
    04-19-2024
    Local Time
    09:08 PM
    1903 springfield stacking swivle screws are the same, just a bit shorter then the shotgun.
    the Kragicon stacking screw is a good fit as well, but that pretty tough to find.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Festus's Avatar
    Join Date
    Mar 2009
    Last On
    12-09-2009 @ 12:47 PM
    Location
    Lubbock,Texas
    Age
    84
    Posts
    21
    Local Date
    04-19-2024
    Local Time
    11:08 PM
    Quote Originally Posted by James B. View Post
    A Duck Billed Shotgun I believe is another term for a shot diverter. This is a device which looks somewhat like a flash hider of sorts and is designed to spread the shot pattern lateraly to increase hit probability. Didn't work too well in the real world and I think actually decreased hit performance.
    I can't see anyone in a combat role being issued #9cs without pitching a fit. 00B was standard issue with some Marines getting #4B and maybe a few flechettes. Interesting though, full cans of Vietnam era shells are hard to find.

    James B.
    James is correct about the "diverter"attachment. IIRC they were primarily intended for airfield security against sappers who had infiltrated and would take cover under aircraft and behind landing gear and wheels.
    By shooting low the pellets would spread laterally and any that missed would ricochet at a shallow angle hopefully causing little or no collateral damage.
    Tires,wheels,and brake attachments were cheaper and easier to repair than engines,avionics,and wings.That was the theory.
    As James said they really didn't work that well.
    Festus

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    442nd's Avatar
    Join Date
    Mar 2009
    Last On
    01-11-2015 @ 11:01 PM
    Posts
    22
    Local Date
    04-19-2024
    Local Time
    07:08 PM
    Thread Starter
    How do you post photos here? I would like to post photos of the cans of ammo.

  10. #8
    Legacy Member James B.'s Avatar
    Join Date
    Mar 2009
    Last On
    02-20-2022 @ 08:39 AM
    Posts
    16
    Local Date
    04-19-2024
    Local Time
    09:08 PM
    First you need a hosting site that will store the pics. you want to post. Photobucket is a good one as you can set up a free account although you're limited in size (number of pics.). I have one and have never hit the limit. The cool thing is you can upload pics. from your computer to your Photobucket account directly from this site. Hit reply and scroll down to "Additional Options" and click on "Display Upload From Photobucket".

    You can also use this site as a host and upload pics. (limited in size) in the "Attach Files" box by clicking on "Manage Attachments". These are the pics. that show up in posts that enlarge when you click on them. I'll try to post one of my pics. that will fit; unrelated to your above post. Again, check the file size limit and compare that to the file size of your pics. Pretty slick!
    James B.

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts