-
Legacy Member
Jim,
What are the regulations up in Canada? Can you own a FA or semi. Bren? Here in the US we don't have worry about fixing demills as Bren barrels currently can't be imported but there are plenty available. Thanks for your experience as this is a new subject for me.
Joe
-
-
09-26-2016 04:20 PM
# ADS
Friends and Sponsors
-
Advisory Panel
You can own an F/A if you were one of the lucky many years ago but now that's past. They were registered and those that own are grandfathered to own and buy and sell...but no new owners can be created. Things like spare parts are moot because you can't take them out to shoot any more anyway. Semi auto converted from F/A are called converted auto and they too are grandfathered, and a class unto themselves. No new owners are to be created.
-
-
-
Legacy Member
This should be the final repair plan I reckon - thanks to everyone for their input.
1. Repair the hole using a threaded plug
2. Bore out chamber to 16.5mm as drawn.
3. Shrink fit insert and rechamber.
The plug protrudes into the OD of the bored out section of the barrel, so it will support the end of the insert.
I'll make the insert out of 4140 with a minimum proof stress of 840 MPa. Considering the insert as a barrel by itself, it would be right on the limit of yielding with a chamber pressure of 49 K psi.
http://www.rarco.com.au/wp-content/u...9/20160928.pdf
-
Thank You to Richard- For This Useful Post:
-
Legacy Member
Finished the repairs, worked very well.
Thanks everyone for their input.
-
The Following 3 Members Say Thank You to Richard- For This Useful Post:
-
Advisory Panel
Originally Posted by
Richard-
Finished the repairs, worked very well.
Of course we'd love to see the finished product...
-
-
And what he did and if it were one of our suggestions and....... But like most things Bren, I don't think Richard will be back. Sorry, but that's how it is with Brens......
-
Thank You to Peter Laidler For This Useful Post:
-
Legacy Member
Guys,
I was scratching my head trying figure out what the final repair configuration was. All the links to the detail sketches are no longer good. I searched my files and found the attached. Though maybe someone would be interested.
I hope Richard will sent some pics.
Joe
-
Thank You to Joe H For This Useful Post:
-
Advisory Panel
Originally Posted by
Joe H
I was scratching my head trying figure out what the final repair configuration was.
That's what we're talking about, would love to see the final config...
-
-
Contributing Member
Me too, I would have found workshop step by step pictures fascinating.
A very interesting repair process...
-
-
Legacy Member
Guys,
I'm pretty sure what I posted is the final configuration, but I would also like to see some pics.
Joe
Last edited by Joe H; 02-14-2017 at 06:45 PM.
-