+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Unusual Defect

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member tankhunter's Avatar
    Join Date
    Apr 2010
    Last On
    06-28-2023 @ 05:15 PM
    Location
    UK
    Posts
    1,054
    Real Name
    Mike
    Local Date
    03-28-2024
    Local Time
    02:03 PM

    Unusual Defect

    As I mentioned in a thread in the 'Other' SMGs Etc section. I lay down for your interest, what I encountered at a local Military vehicle Show very recently.

    I attended the War & Peace revival Show from the 16th-24th July here in the UKicon. It is litteraly 20 Mins drive up the road from where I live. (So it would be rude not to attend! )

    I Own an RB44 2 Ton truck with a radio Body on the rear. So I have comfortable accommodation to live/ sleep. & also the benefit of being able to secure weapons in the 'Shack', when I wish to have a Beer or two with good friends.

    Obviously, you tend to walk round the show seeking out similar owners, to share/ learn about similar marques of vehicle & their particular Picadillos.

    Well, I was talking to this nice Chap & his son, who were also owners of the same model truck as mine. & obviously the conversation turned round to my Trade as an Armourer.
    The Guy mentioned he had a problem with his Deact Bren. It would clock, but not dry fire.
    I offered to examine the Gun to discover the problem, & took it back to my pitch.

    it was a MK.I.m Model, with the horrible MK.II Spindly Bipod! Upon CAREFULLY pushing the body locking pin to one side. & SLOWLY pulling the Butt Slide rearwards. It was indeed, cocked & putting the return springs under compression!
    Holding the working parts with my Left hand & the Butt with my Right. I pulled the slide sufficiently back to clear the receiver end. & CAREFULLY lifted the whole piston extention & B/Block as one. Up & off the sear, & slowly releasing the ensemble forwards. Easing the tension on the return springs & push rod.

    Upon close inspection, It revealed that the trigger axis pin was missing. Aha, I thought. But it didn't end there!
    The reason the trigger axis pin got lost, was because. The trigger plunger Operating spring, had collapsed inside the tripping sear! The plunger puts tension on the axis pin at ALL times. & without this pressure, the pin simply fell out unnoticed by it's owner!

    I only had a few Bren spares with Me at that time, & naturally. Nothing that I needed!
    So....I removed the trig Plunger retaining pin, which is very small. & discovered that the coil spring had collapsed in TWO places, making three sections of short & coil bound spring!.

    What to do I pondered?....So I made a new axis pin from a nail used in a bolt gun, which was conveniently headed. But hard to file!
    & robbed a coil spring from a Biro Pen, which was given to me that morning from a stall holder as a Freebie. Not quite as strong as the original, but did the job admirably!

    Reassemble the Gun & it all worked as it should. A few repeated cock & fire's to check all was OK. & it was duly returned to a very pleased owner. Another Friend Made, & Tech info manuals on my Truck being Emailed to me as we speak. Lovely!

    Another example of 'Adapt & Overcome' in the Field. Of which R.E.ME Trained Personel excel if I may make so Bold!

    I hope you guys found this just a little entertaining? If not....well. Pour another glass for Me Please!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by tankhunter; 07-26-2016 at 04:15 AM.

  2. The Following 11 Members Say Thank You to tankhunter For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    09:03 PM
    Make do and mend. The Armourers motto I say!

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    12:03 PM
    Well done that! Sounds like many jobs I've managed as well...as long as it functions as it should, let the armorers sort it later.
    Regards, Jim

  7. #4
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-28-2024
    Local Time
    03:03 PM
    Improvise, adapt and overcome!!

  8. #5
    Contributing Member Gil Boyd's Avatar
    Join Date
    Apr 2013
    Last On
    02-28-2024 @ 11:09 AM
    Location
    Home of The Parachute Regiment & 16 Air Assault Brigade
    Posts
    4,772
    Real Name
    Gil Boyd
    Local Date
    03-28-2024
    Local Time
    07:03 PM
    Sounds like a Blue Peter badge, sticky back plastic and a biro pen..........you lot always were a remarkable breed, do anything for a workshop manual.
    'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA

  9. #6
    Legacy Member tankhunter's Avatar
    Join Date
    Apr 2010
    Last On
    06-28-2023 @ 05:15 PM
    Location
    UK
    Posts
    1,054
    Real Name
    Mike
    Local Date
    03-28-2024
    Local Time
    02:03 PM
    Thread Starter
    Hey up Gil! The 'Blue Peter Badge' came in the form of a few Beers that Evening. From a very Grateful 'Customer'!... Very nice too, I like Budweiser! LOL

  10. #7
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    03-25-2024 @ 02:00 PM
    Posts
    1,807
    Local Date
    03-28-2024
    Local Time
    08:03 PM
    Hey Tankie, I know your out of the mob now but did you see the NEM for the armed forces? The top earners are Army Air Corps pilots and there welcome to it for the job they do. Next up was the RLC Ammo Tec! WTF, an ammo storeman gets paid higher than any other trade in the military!!

  11. #8
    Contributing Member Gil Boyd's Avatar
    Join Date
    Apr 2013
    Last On
    02-28-2024 @ 11:09 AM
    Location
    Home of The Parachute Regiment & 16 Air Assault Brigade
    Posts
    4,772
    Real Name
    Gil Boyd
    Local Date
    03-28-2024
    Local Time
    07:03 PM
    Oh well..........me and Peter on our old PARA pay were duped for many years as we thought. Good cause subsidising the REME and AAC so don't feel so bad now
    'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA

  12. Thank You to Gil Boyd For This Useful Post:


  13. #9
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    09:03 PM
    Another one of those niggling faults with Brens was that the blind hole behind the barrel nut plunger, where the spring goes, used to block up with crud and water and that'd cause the spring to rust. Once you pressed the plunger in (to get the chinese puzzle magazine plunger out.....), it'd crush and break the spring and nothing was going to get the plunger out! The plunger was diamond hard and such an awkward shape that a drill wouldn't touch it. You could bang and bash but once the rust had got behind it, you were fighting a losing battle. Every man and his dog thought that they could shift it of course. You could put drifts and sharpened screwdrivers down the mag plunger part of the hole, only to break off the front bit of the barrel nut plunger and.....

    We had to write off a couple that had been made worse by the attempts of others. The L4A2 onwards guns were a bit better because you could get a very thin drift in from the rear that might JUST slide to one side of the spring retainer. What a palava......

  14. #10
    Legacy Member tankhunter's Avatar
    Join Date
    Apr 2010
    Last On
    06-28-2023 @ 05:15 PM
    Location
    UK
    Posts
    1,054
    Real Name
    Mike
    Local Date
    03-28-2024
    Local Time
    02:03 PM
    Thread Starter
    Quote Originally Posted by Gil Boyd View Post
    Oh well..........me and Peter on our old PARA pay were duped for many years as we thought. Good cause subsidising the REME and AAC so don't feel so bad now
    Hey Gil I an recall a case of a Mess Collegue with 3 Para in B.A.O.R, when I was with them. He had an ND (Negligent Discharge) on the Range. & as per Proceedure dictated. The weapon was cleared & removed from Him. Tagged & Packaged up & came to Me for an Armourers inspection/examination. As he stated the weapon had gone off by itself.

    As He was also a fellow Senior NCO & a very decent Chap. He came to me in a bit of a state, knowing what might happen if the weapon actually were not defective!......

    Well, aid inspection/ examination thoughly carried out by yours truly. & you guessed it, nothing wrong whatsoever with the Rifle (L1A1) So.......What to do I thought?......
    After stripping the trigger meh housing components out. I proceeded to 'Play' with the sear bent on the hammer, & also the engagement bent of the sear. Introducing 'wear' to these parts. So that when you cocked the rifle, SOMETIMES the bearly engaging faces of those areas would allow the hammer to fly forward. Imitating uninitiated firing!........
    I did this so it wouldn't do it every time, but you COULD get it to do this a few times.

    My report stated that with tollerances at the minimum end of the scale on both components. Combined with wear to them also. This would/ had indeed caused the Weapon to Fire 'Inadvertantly'!...................Case dismissed, & aforementioned SNCO was dropped from potential serious consequences to his Career.
    Not a thing I would do normally naturaly. But this chap was a VERY decent Bloke & looked after his Men excellently. He was also under great strain with serious Family difficulties. & we in the Mess felt for Him.

    I warned him that if anything EVER happened like this again (Which I put my hand on my own heart & state, it wouldn't) I would not be able to dig him out again!...

    Result was, I never had to buy a beer in the mess again. & when he was moved into the QMs dept, to the clothing store. I never went short of woollie Pully's Or Para Smocks!
    I had an excellent spare set of issue clothing, that was tailored to perfection also!....

    Not really the thing to do of course. But this case was the exception to the rule. & I never had to resort to anything like that again, Thankfully!

    So Gil, HIS PARA Pay was VERY well received in Beer to THIS R.E.M.E Armourer! LOL

    ---------- Post added at 04:22 AM ---------- Previous post was at 04:19 AM ----------

    Quote Originally Posted by Brit plumber View Post
    Hey Tankie, I know your out of the mob now but did you see the NEM for the armed forces? The top earners are Army Air Corps pilots and there welcome to it for the job they do. Next up was the RLC Ammo Tec! WTF, an ammo storeman gets paid higher than any other trade in the military!!
    BP, The extra pay for ammo techs is because they are at risk from blowing themselves up all the time. Rendering Inert, all the 105mm Shell cases we are always asking for. To convert into mess Bells with the Punisher motief cut out & filed into the side!....LOL

  15. Thank You to tankhunter For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Receiver defect?
    By Mark in Rochester in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 05-18-2015, 07:47 PM
  2. Barrel has had an odd defect?
    By kngsnk in forum Mauser Rifles
    Replies: 6
    Last Post: 08-22-2011, 05:47 PM
  3. An Unusual L-E
    By Victor Six Bravo in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 06-03-2009, 05:10 PM
  4. Defect Report/Handle of Oprod
    By clancy in forum Milsurps General Discussion Forum
    Replies: 0
    Last Post: 12-29-2007, 12:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks