+ Reply to Thread
Results 1 to 9 of 9

Thread: Need information on a Berthier MLE 1907-15 receiver marked Établissement Continsouza

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member tdennis's Avatar
    Join Date
    Aug 2012
    Last On
    08-30-2023 @ 08:46 PM
    Location
    Central Virginia
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    03:10 AM

    Need information on a Berthier MLE 1907-15 receiver marked Établissement Continsouza

    I own a 8mm Lebel that is marked on the receiver in nice bold script ET es Continsouza MLE 1907-15. On the root/base of the straight bolt it has the letter L in a circle. Also what may be a worn script T followed by and H also in script, then serial number 29793. I see no other marking on any of the metal but I did not remove any of the wood.

    This was part of my wife's father's military gun collection but no information was provided. I am trying to find out what it is and an approximate value for insurance purposes. The rifle appears to be in as issued condition. I know that my father-in-law bought several rifles via the NRA back in the late 50's and 60's prior to the 68 gun control act. Wife and I were married in 1966 and he owned this rifle prior to our marriage.

    What little I have found out about it seems to indicate that only the receiver was made by Établissement Continsouza and that this in addition to it still being a MLE 1907-15 and not converted to a MDL-16 makes it more desirable to a collector of Frenchicon military firearms.

    Appreciate any information you might be able to provide.
    Thanks
    Tdennis
    Central VA
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to tdennis For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    04-23-2024
    Local Time
    02:10 AM
    As with everything the value depends on condition, matching numbers, etc. There should be a matching numbered bolt and stock just to start as the Frenchicon loved to number every visible part they could. As to value an 07-15 is a little more desirable as supposed to say just an Mle 1916 and Continsouza is a harder to find arsenal (it ranks up there with Tulle marked examples). Also if the stock has been refinished in any way it'll hurt the value as most don't want refinished pieces. Getting a couple of pictures posted here can help as well as it lets others who know the market well get a good close look at what you have.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member tdennis's Avatar
    Join Date
    Aug 2012
    Last On
    08-30-2023 @ 08:46 PM
    Location
    Central Virginia
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    03:10 AM
    Thread Starter
    Thanks burb1989, I will try to take some photos later today or tomorrow and post them. I did decide to pull the upper wood off the forearm and found these numbers:
    On the side opposite the bolt just in front of the receiver it has stamped "CN" and just under that it has What appears to be "83314". On the bolt side the barrel, just in front of the receiver is marked "MAS 1917". I was not sure how to tell if it was a 3 shot or 5 shot but by looking at some photos of others I believe this one is a 5 shot since it has the metal magazine extension just in front of the trigger guard.

    I also found a serial number 85560 stamped on the bottom of the trigger guard bow.
    Tdennis

  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    04-23-2024
    Local Time
    02:10 AM
    Well the markings go like this:
    The CN 83314 is the letter block and serial number of the rifle. From the other numbers posted yours sounds like a complete mixmaster of parts from different rifles. That's fairly common but it does decrease the value some because of that.
    The MAS 1917 is the arsenal where your rifle was finished and when the barrel was placed into the receiver, finishing your rifle. Yours was finished and ready to go sometime in 1917.

  8. #5
    Legacy Member tdennis's Avatar
    Join Date
    Aug 2012
    Last On
    08-30-2023 @ 08:46 PM
    Location
    Central Virginia
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    03:10 AM
    Thread Starter
    Attached are photos of the rifle mentioned above.
    Tdennis

  9. Thank You to tdennis For This Useful Post:


  10. #6
    Legacy Member tdennis's Avatar
    Join Date
    Aug 2012
    Last On
    08-30-2023 @ 08:46 PM
    Location
    Central Virginia
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    03:10 AM
    Thread Starter
    Quote Originally Posted by burb1989 View Post
    Well the markings go like this:
    The CN 83314 is the letter block and serial number of the rifle. From the other numbers posted yours sounds like a complete mixmaster of parts from different rifles. That's fairly common but it does decrease the value some because of that.
    The MAS 1917 is the arsenal where your rifle was finished and when the barrel was placed into the receiver, finishing your rifle. Yours was finished and ready to go sometime in 1917.
    Thanks burb1989, I appreciate your time and information. I don't normally fool with these type rifles, more into flintlocks but wanted to see what info I could come up with for my father-in-laws (now deceased) rifle.
    Thanks
    Tdennis

  11. Thank You to tdennis For This Useful Post:


  12. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    burb1989's Avatar
    Join Date
    Sep 2012
    Last On
    07-04-2019 @ 10:43 PM
    Location
    biloxi,mississippi,usa
    Posts
    268
    Local Date
    04-23-2024
    Local Time
    02:10 AM
    No problem. That 8mm scratched into the side will hurt value some too. Overall though it looks in decent shape and not refinished which helps. There isn't a lot of demand for Frenchicon rifles here in the US hence why there is low supply. With the condition and mismatched parts I would put an educated guess value at around $250-$300. Now if it was Remington marked that would be a whole different story as they only made limited numbers of them for Russiia and those can get into the thousands.
    Last edited by burb1989; 08-18-2016 at 06:42 PM.

  13. #8
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 11:11 PM
    Location
    Pennsylvania, United States
    Posts
    7,020
    Real Name
    Steve
    Local Date
    04-23-2024
    Local Time
    03:10 AM
    $250-$300 might be a little high but is reasonable.

  14. #9
    Legacy Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 09:58 PM
    Location
    USA
    Posts
    4,322
    Real Name
    Robert Seccombe
    Local Date
    04-23-2024
    Local Time
    02:10 AM
    The Remington is not the most desirable to the collector, as most were rejected by the Frenchicon or underwent rebuild by the French when received during the war. Most Remingtons found
    in the USAicon are in excellent condition because they were never shipped but sold as surplus after the war.

    The Remington Mosin Nagant is an excellent well made rifle

  15. The Following 3 Members Say Thank You to RCS For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Berthier Mle 1907-15 M34 MAS 7.5 Conversion
    By Seamie in forum Milsurps General Discussion Forum
    Replies: 6
    Last Post: 12-08-2014, 03:31 PM
  2. Continsouza Berthier M16 carbine.
    By Anzac15 in forum Milsurps General Discussion Forum
    Replies: 8
    Last Post: 07-15-2014, 04:43 AM
  3. FRENCH LE 1907-15M 34MAS 7.5 x 54 BERTHIER CARBINE INFORMATION NEEDED
    By mas34 in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 04-29-2013, 11:48 AM
  4. Replies: 25
    Last Post: 05-27-2009, 10:37 PM
  5. Looking for some information on a M1 carbine marked G.H.D. on receiver.
    By Sal in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 05-19-2009, 04:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts