Canadian Long Branch swift training rifle target stand.

[Bigedac]

I am looking for a target stand for the Canadian Long Branch Swift training rifle. A British one may do, but the Long Branch will fit my rifle. Thanks for the help.
Bigedac

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Peter Laidler]

Does it have to be original? I ask because there was some discussion here a few years ago and someone had the drawings and made a VERY good replica. Even used old wood and 'aged' it. Incidentally, they made the rifles not 5 miles from where I live

[Brian Dick]

If you're speaking of the "Aiming Rest Tripod", I may be able to help. I'll have to see if I have enough parts to assemble one for you.

---------- Post added at 01:26 PM ---------- Previous post was at 01:25 PM ----------

It just dawned on my that it's the target frame you're seeking?

---------- Post added at 01:26 PM ---------- Previous post was at 01:26 PM ----------

dawned on me!

[Bigedac]

Brian,
I'm not sure what an "Aiming Rest Tripod" is. We plan to use this rifle at the Aviation Cadet World and let folks try it out to see what training our guys went through in Canada and Great Britain. So, we need all the parts to make it a viable display. I have some original British targets that I will copy and use for "hole punching".

---------- Post added at 05:03 PM ---------- Previous post was at 05:02 PM ----------

Dear Peter,
Thank you so much for your response. It does not have to be original as I plan to use it for an interactive display here at Aviation Cadet World. I have some original British targets that I plan to copy and use them for “hole” poking. That’s very interesting that they made them so close to you. I am also looking for .280 Ross loading dies, forming dies etc. if you happen to run across them.
Thanks again,
Bigedac[COLOR="black"]

---------- Post added at 05:04 PM ---------- Previous post was at 05:03 PM ----------

[browningautorifle]

looking for .280 Ross loading dies, forming dies etc.

If you place a WTB here in the appropriate forum they will likely appear.

[Brian Dick]

It's the target frame you're after. I don't have any here. I do have some Swift trainers but sold the only complete one, (British), I had several years ago. There must be a plan for making one someplace. I don't think an original will be too easy to find but I could be wrong.

[mr.e moose]

For the .280 Ross dies Buffalo Arms in Idaho has RCBS in stock for $148.64. They have brass as well, pricey but its such a fine cartridge.

[breakeyp]

I am aware of two types of stands. A full size walk up made from maybe fourxfour posts. One was at the Nottingham Pattern Room. I don't know if Leeds has it now.

Shown are illustrations of a folding stand associated with Long Branch. Dimensions can be calculated by using law of proportions given the known length of a swift rifle.

Scans are from MacPherson's book on the Swifts. .