Closed Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: Stopping a german tank with a Garand

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member bob4wd's Avatar
    Join Date
    Sep 2009
    Last On
    03-16-2024 @ 07:51 PM
    Location
    tehachapi, California
    Posts
    207
    Local Date
    04-25-2024
    Local Time
    04:41 AM

    Stopping a german tank with a Garand

    Was talking to a WWII vet yesterday, still very sharp BTW, and got to talking about my rifles collection. He mentioned that it was well-known at the time that a good shot, if he was super cool, could place a bullet between the turret and the hull of a Germanicon tank and it would go inside, ricocheting all over the place. He didn't recall just what model of tank this would have been (i imagine they would have all looked alike to a scared infantryman at the time!), but seemed to be pretty confident that this was true.
    So I allowed as how that was very interesting and the conversation went on to other interesting things. The whole time, though, I was thinking that this fell into the same ejected Garandicon clip "ping" category- everybody knew somebody else that swore it was real, but nobody ever actuallyhad it happen to them. I can't imagine any tank designer allowing such an obvious defect to exist, but still.....
    So could such a thing be possible? What say you?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 2 Members Say Thank You to bob4wd For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,944
    Real Name
    Doug
    Local Date
    04-25-2024
    Local Time
    07:41 AM
    My Videos in Video Club
    12
    ... not sure what else to add!!!!

    Regards,
    Doug

  5. The Following 3 Members Say Thank You to Badger For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 06:06 PM
    Location
    Victoria BC
    Posts
    29,927
    Real Name
    Jim
    Local Date
    04-25-2024
    Local Time
    04:41 AM
    Quote Originally Posted by bob4wd View Post
    So could such a thing be possible? What say you?
    No, not even remotely possible. Anyone suggesting such a thing has never had their head inside a tank.
    Regards, Jim

  8. The Following 3 Members Say Thank You to browningautorifle For This Useful Post:


  9. #4
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 08:52 PM
    Location
    UK
    Posts
    5,108
    Local Date
    04-25-2024
    Local Time
    12:41 PM
    There were some WW2 Germanicon tanks that were very difficult to put out action with allied A.P. rounds because of the thick armour. Some success could be achieved by hitting the lower part of the main gun barrel trunnion causing the shell to be deflected downwards through the roof of the tank where the armour was thinner. One or two of the German tanks in the Tank museum at Bovington still have the scars to show where this was attempted. It was a difficult shot to get a successful hit but not impossible and does show that there were weaknesses in design.

    I would say the theory outlined in Post 1 is perfectly possible because German tanks did have weaknesses, as I have just described, as did allied tanks. Also there are supposedly a number of unfortunate cases involving early "bullet proof" limousines in which 1 or more of the occupant has been killed by an assassin firing through/round the edges of the doors. This has supposedly been rectified by a design change in more modern designs of armoured limousine so that a bullet can't get a direct path into the vehicle through the door edge gap.

  10. Thank You to Flying10uk For This Useful Post:


  11. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 06:06 PM
    Location
    Victoria BC
    Posts
    29,927
    Real Name
    Jim
    Local Date
    04-25-2024
    Local Time
    04:41 AM
    Quote Originally Posted by Flying10uk View Post
    It was a difficult shot to get a successful hit but not impossible and does show that there were weaknesses in design.
    I say again, put your head inside a tank. A rifle won't penetrate at the turret ring. An AP anti tank shell is different. They aren't weak.

    Quote Originally Posted by Flying10uk View Post
    I would say the theory outlined in Post 1 is perfectly possible because Germanicon tanks did have weaknesses
    You're talking about a vehicle you know nothing about...
    Regards, Jim

  12. The Following 3 Members Say Thank You to browningautorifle For This Useful Post:


  13. #6
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 08:52 PM
    Location
    UK
    Posts
    5,108
    Local Date
    04-25-2024
    Local Time
    12:41 PM
    Quote Originally Posted by browningautorifleicon View Post
    You're talking about a vehicle you know nothing about...
    I've told you before Jim don't be so quick to criticise others, you don't know everything.

    I speak as an experienced engineer and you will make yourself look silly if someone comes along with evidence proving what is suggested in Post 1 is entirely possible.

  14. Thank You to Flying10uk For This Useful Post:


  15. #7
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 08:02 PM
    Location
    The wild west of England
    Posts
    3,404
    Real Name
    Mr Clark
    Local Date
    04-25-2024
    Local Time
    12:41 PM
    I last saw the the excellent Bovington collection about 9 years back.
    The King Tiger inparticular is both hugely impressive and absolutely terrifying in equal measure!

    Seeing, hearing and feeling these things thundering towards you on the battlefield would strike the fear of god into any sane person.

    Any infantryman would, I am sure, keep his head firmly down and not take pot shots with his rifle, to do so would invite the full fury of the armour and the supporting Pazner grenadears...

  16. The Following 2 Members Say Thank You to mrclark303 For This Useful Post:


  17. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 06:06 PM
    Location
    Victoria BC
    Posts
    29,927
    Real Name
    Jim
    Local Date
    04-25-2024
    Local Time
    04:41 AM
    Quote Originally Posted by Flying10uk View Post
    I speak as an experienced engineer
    That's what I mean exactly. Go take a look and think about what you're suggesting. Badger used to live in a tank and he just laughed...(post 2)...

    Quote Originally Posted by Flying10uk View Post
    don't be so quick to criticise others, you don't know everything
    I assure you, I have a good handle on armor and the inside of a tank. I was advance driver and maint instructor...you don't know anything about me.
    Last edited by browningautorifle; 02-18-2017 at 12:49 AM.
    Regards, Jim

  18. Thank You to browningautorifle For This Useful Post:


  19. #9
    Legacy Member matthanne1's Avatar
    Join Date
    Jun 2016
    Last On
    09-16-2023 @ 10:41 PM
    Location
    Illinois
    Posts
    214
    Local Date
    04-25-2024
    Local Time
    06:41 AM
    Perhaps one may have better chance at the vision block, not the turret race ring. These are built to absorb and distribute the weight at angle as well as residual recoil from firing. Think the recoil assembly handles it all? This is why the chassis also jumps when firing. Most race rings are, first and foremost, channels in the hull roof and turret base in which those proverbial steel 1" or so ball bearings roll. Interior wall plates protect from debris and allow water runoff. An inner ring is toothed to facilitate the turret traverse drive. No clear path. A round will expend energy bouncing until it reaches the ball bearing race, in which it will likely be ground up.

    Instead, the slit slots (not periscopes, but in particular the driver vision and machinegunner aiming ports and especially the nearly vertical turret walls) which did not have glass behind them are much more appealing, and while causing a brew-up is unlikely, there is a chance that eyes are behind that slot which WILL cause a reaction.
    Last edited by matthanne1; 02-17-2017 at 08:24 PM.

  20. The Following 2 Members Say Thank You to matthanne1 For This Useful Post:


  21. #10
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 12:18 PM
    Location
    South West Western Australia
    Posts
    7,754
    Real Name
    CINDERS
    Local Date
    04-25-2024
    Local Time
    07:41 PM
    Couple of things here and I will rabbit a bit here,
    As far as knocking out a tank with a rifle by getting it between the hull & turret ring wont happen as the turret sits in ball bearings so there is no gap per say that leads directly into the turret as there is a skirt behind the ball bearing race which is part of the turret so the turret basket can be attached.
    A good shot and I mean a good shot may have a go at the drivers vision blocks but the commanders cupola has a fair few of them he can guide the tank if needed or worst case scenario rotate the turret and if the bow gunner cannot get to you the main gun may spoil your day. Besides it would take guts to crack at a tank with a 30/06 be like trying to kill an elephant with a slingshot good chance you'll hit him on the trunk and just get stomped to death for your effort.
    I have seen live footage of the war in Syria of a lunatic fighter stuff a grenade down a soviet tanks main gun and disable the tank & crew I am not sure of the truth but it is there to see.

    When Tiger 131 was captured in Africa it was a fluke shot that jammed the turret ring that and the crew being of a nervous disposition and leaving a complete and functioning Tiger for the allies to take and evaluate I wonder what they said when they got back my guess is they were probably shot for cowardice.
    Everything has to be lined up just so to try and land a shell exclusively in the turret ring would be difficult to a degree especially if it were on the move, if you were in a TD you have the opportunity to move after you have fired creating an elusive target also being able if possible utilizing structures or ground to conceal & protect yourself, as all the dust & smoke is going to show where you fired from getting a response from maybe a bigger tank.

    A towed A/T gun well you would need a few of them to keep the tank suppressed you cannot do anything about the dust and crud signaling your position so your shot must be good to disable it to a point where it is not a threat but I know for a fact in Russiaicon one Tiger (Pictures of the period of that tank) took over 200 hits from A/T rounds and still crawled 20 klms back to its rear, a tanks weakness even todays ones are the tracks knock them off to give yourself a fighting chance it may be still able to pivot turn on one track to help speed up the turret getting on to target but its not going anywhere.

    Thing is the Germans did not send just one tank usually there was a good smattering of infantry with different types maybe scout tanks IV's V's with the Heavies like the VI's, Ferdinands (They were defunct after Kursk really) Panthers or Jagdtigers (From a fixed concealed positions shoot & scoot perhaps).

    Sadly a great story and full respect for the vet concerned and for all of those that went away but in reality it would probably mean the demise of the man firing the rifle if not by the tank then surely from the supporting infantry.

    One other post sript as I am a rabbit is if the A/P round does not penetrate the hull or turret it may impart such a force that inside the turret/hull the armour crazes and cracks sending secondary fragments around the hull interior disabling/killing the crew. Whilst not a biscuit the fragments would be given enough impetus from the hit to do the deed to the soft stuff inside the tin can.
    "The Biscuit" is a term given to the shard/chunk of metal/armour plate that is broken off and moves ahead of the A/P round prior to the entry of the said round this was explained in a video I watched on battleships and how a 15" shell penetrates the armour sides/turret of wherever, what happens is on the inside is a great chunk of steel breaks free ahead of the projectile and becomes a secondary missile killing and maiming before the shell enters and detonates.
    The force a 1 ton 15" shell can excerpt or striking energy was calculated at 80,000/foot tons sort of like the Yamato landing on you I have it in my books some where as it goes through all the different calibers and their striking energy & MV's.
    Last edited by CINDERS; 02-17-2017 at 11:40 PM.

  22. The Following 5 Members Say Thank You to CINDERS For This Useful Post:


Closed Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. OT Bonus - American Soldiers Blast German Tank with Bazooka in Normandy 1944
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 9
    Last Post: 09-15-2016, 06:33 PM
  2. 16-211 Garand Picture of the Day - M4 Sherman tank Pacific
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 0
    Last Post: 07-11-2016, 04:57 PM
  3. stopping active rust
    By henry r in forum The Restorer's Corner
    Replies: 16
    Last Post: 01-09-2016, 06:41 AM
  4. Sten Mk3 - Stopping barrel rotation
    By Vincent in forum Gunsmithing for Old Milsurps
    Replies: 19
    Last Post: 12-16-2014, 12:08 PM
  5. W.W.1 German 13mm Anti-Tank Rifle
    By juno-44 in forum Mauser Rifles
    Replies: 28
    Last Post: 02-11-2014, 08:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts