Which Parker-Hale Rings are correct for those bases?

**Promo** · 02-25-2017 04:55 AM

There are the bases with dimensions - in metric system.

**Highly Recommended** · 02-25-2017 04:55 AM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**rgg_7** · 02-25-2017 09:08 AM

Can you measure width at top. See your front base is marked "20" on the back face which confirms to me that these are early steel Parker Hales. Once I see your info I'll check against some of mine and advise you on ring selection. Ron.

**Promo** · 02-25-2017 05:22 PM

The top is as large as the one at the rear, 16.5mm, so it might be a 17mm dovetail.

**rgg_7** · 02-25-2017 05:49 PM

Same as mine. You need RBLS (low mounts) or RBHS (high mounts) depending on your scope ocular dimension. The designation will be followed by ".3" for 1" tubes and ".4" for 26mm. Hope this all helps. Ron (Canada icon

).

**Promo** · 02-26-2017 06:12 AM

Hello Ron, many thanks for the proper identification! I honestly have no idea which scope originally belongs to it and guess I'd rather follow the scope rings to pick the scope than to try and find the proper rings for my scope and rifle. You don't happen to have either of the two mentioned fitting scope rings which you'd part with, for money or in a trade?

**Gil Boyd** · 02-27-2017 04:13 AM

Promo,
These two pages may help you in relation to rings from the PH archive. Page 2 showing abbreviations and prefixs used by PH on development.

**Promo** · 02-27-2017 05:13 AM

That sounds and looks like the nightmare for production and storage, what an amazing amount of different variants! Thanks for the picture, that is definately a reference file worth to be saved.

**Gil Boyd** · 02-27-2017 09:31 AM

Yes hopefully others will now keep a copy as this one is the only one in the Parker Hale archive.

**Mk VII** · 02-27-2017 04:43 PM

I had the same idea and scanned the list from catalog #67 into the Parker-Hale sub-board.

**Gil Boyd** · 03-01-2017 03:11 AM

Promo,
The rings you will need for what you have there are the RWS SPORTSMATCH, they are for the CZ 527 but they will fit the dovetail you have perfectly, believe them to be 1" and 30mm. You have probably deduced that already?

Thread: Which Parker-Hale Rings are correct for those bases?

Thread Tools

Search Thread

Display

Thank You to rgg_7 For This Useful Post:

The Following 3 Members Say Thank You to Gil Boyd For This Useful Post:

Thank You to Mk VII For This Useful Post:

Similar Threads

Parker Hale RALS Scope Rings

Parker Hale 1200 scope bases

Parker Hale rings/bases

Need parker hale rings

Tags for this Thread

Posting Permissions