+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 39

Thread: Six pointed Star marking on Sten mag.

Click here to increase the font size Click here to reduce the font size
  1. #11
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    03-04-2024 @ 02:19 PM
    Posts
    1,807
    Local Date
    03-19-2024
    Local Time
    05:49 AM
    You can only get 19 in my mags too. If you put a full length spring in you don't even get 19 in.

    ---------- Post added at 08:56 AM ---------- Previous post was at 08:53 AM ----------

    And although I've not tested my theory, the reduced legs of the platform stop it bottoming out before the 19th round. So the shortened spring and platform sit further up/lower down the magazine when 19/20 rounds are loaded.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-17-2024 @ 02:10 PM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,505
    Real Name
    Peter Laidler
    Local Date
    03-19-2024
    Local Time
    06:49 AM
    Well, you learn something new every day! Thanks chaps. Maybe one day I ought to write a book about the Sten. As a matter of interest (as I don't have a Sten mag and certainly not an Indian reduced capacity mag) how many can you get into an Indian mag with a normal spring and platform?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:35 AM
    Location
    Victoria BC
    Posts
    29,813
    Real Name
    Jim
    Local Date
    03-18-2024
    Local Time
    09:49 PM
    Quote Originally Posted by Peter Laidlericon View Post
    I ought to write a book about the Sten.
    "If" you do I should send mine for an autograph...
    Regards, Jim

  6. Thank You to browningautorifle For This Useful Post:


  7. #14
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-17-2024 @ 02:10 PM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,505
    Real Name
    Peter Laidler
    Local Date
    03-19-2024
    Local Time
    06:49 AM
    While I don't disagree about the change in platform design and spring length in the Indian 'shorty' mags, I've spent an hour wracking my brain as to the mechanics of why, sat in car while wifey was shopping for, well, anything if the past is anythng to go by..... The two wires (rubbing strips or RS's) simply narrow the width of the mag internally and give a more friction-free surface. It's this narrowing of the width that gives the mag its single stack feed. But even that isn't quite true factually or mathematically. That's because when the rounds contact the r/s's they still form left/right/left/right columns but just not to the same degree. As for the reduced friction, then this is a matter of fact because one little known point in mag feed systems is that as the rounds roll up the sidewall of the mag they will attempt to rotate of course. BUT, they try to rotate the next rounds in the OPPOSITE direction.AGAINST the direction they are directed to by the mag sidewall. It's horrendous in there! That's why of course, any sensible mag has ribs. Not just for corrugated strength but to reduce friction too. Hold on........, I'll come to the platform next....... The REALLY clever mag designers incorporate ribs that as well as doing that, also hold absolute control over the circular mag spring by forming a box like section in which it runs. No distortion, rollers = very little friction............ Just as the maestro George Patchett did with the Sterling.

    As for shortening the length of the platform front and rear 'legs'...... Without one here, just going from memory and the design course mech notes, then in reality, you can only shorten the front and rear legs to equate with the compressed length of the platform spring which sits with them. If they have shortened them, then this can be the only reason why. Less sidewall friction = less workable load for the spring to overcome = less poundage spring needed. Mmmmmmmmmmm If it ain't broke then don't fix it.

    At work we had a sectioned Sterling mag against a sectioned Sten mag for comparison. Maybe I should have had a sectioned Indian shorty mag sectioned too as a sort of halfway house between two opposites. Sorry to go off at a tangent. Just getting over my Grand National loss from yesterday!

  8. Thank You to Peter Laidler For This Useful Post:


  9. #15
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-18-2024
    Local Time
    10:49 PM
    Quote Originally Posted by Peter Laidlericon View Post
    .... As a matter of interest (as I don't have a Sten mag and certainly not an Indian reduced capacity mag) how many can you get into an Indian mag with a normal spring and platform?
    You can just get 19 rounds in. But I don't think it wold be crunchy proof. If the magazine will fit in the housing with the breech block forward, cocking the gun will probably drive the rounds/platform against the floorplate and force it off. I will check it later and let you know.

  10. Thank You to Vincent For This Useful Post:


  11. #16
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 10:42 PM
    Location
    UK
    Posts
    5,072
    Local Date
    03-19-2024
    Local Time
    04:49 AM
    Thread Starter

    Comparison pictures of standard and reduced capacity mag components.

    The modified Indian platform is blued and the standard one is plain phosphate finish. As can be seen the legs have been shortened slightly on this Indian modified example as well as having the top of the platform flattened off. The spring has been shortened by approximately 1 1/2".

    Is the marking from the Indian Workshop that did the conversion?
    Last edited by Flying10uk; 04-09-2017 at 06:21 PM.

  12. #17
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-18-2024
    Local Time
    10:49 PM
    Quote Originally Posted by Flying10uk View Post
    Is the marking from the Indian Workshop that did the conversion?
    That’s correct. ICR = Indian Central Railway. There’s a page or two on them in Peter’s Sten book.

  13. #18
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-18-2024
    Local Time
    10:49 PM
    Quote Originally Posted by Peter Laidlericon View Post
    While I don't disagree about the change in platform design and spring length in the Indian 'shorty' mags, I've spent an hour wracking my brain as to the mechanics of why, sat in car while wifey was shopping for, well, anything if the past is anythng to go by..... The two wires (rubbing strips or RS's) simply narrow the width of the mag internally and give a more friction-free surface. It's this narrowing of the width that gives the mag its single stack feed. But even that isn't quite true factually or mathematically. That's because when the rounds contact the r/s's they still form left/right/left/right columns but just not to the same degree. As for the reduced friction, then this is a matter of fact because one little known point in mag feed systems is that as the rounds roll up the sidewall of the mag they will attempt to rotate of course. BUT, they try to rotate the next rounds in the OPPOSITE direction.AGAINST the direction they are directed to by the mag sidewall. It's horrendous in there! That's why of course, any sensible mag has ribs. Not just for corrugated strength but to reduce friction too. Hold on........, I'll come to the platform next....... The REALLY clever mag designers incorporate ribs that as well as doing that, also hold absolute control over the circular mag spring by forming a box like section in which it runs. No distortion, rollers = very little friction............ Just as the maestro George Patchett did with the Sterling.

    As for shortening the length of the platform front and rear 'legs'...... Without one here, just going from memory and the design course mech notes, then in reality, you can only shorten the front and rear legs to equate with the compressed length of the platform spring which sits with them. If they have shortened them, then this can be the only reason why. Less sidewall friction = less workable load for the spring to overcome = less poundage spring needed. Mmmmmmmmmmm If it ain't broke then don't fix it.

    At work we had a sectioned Sterling mag against a sectioned Sten mag for comparison. Maybe I should have had a sectioned Indian shorty mag sectioned too as a sort of halfway house between two opposites. Sorry to go off at a tangent. Just getting over my Grand National loss from yesterday!
    Very interesting post, Peter. It had never occurred to me the rounds would try to rotate in opposite directions.

  14. #19
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 10:42 PM
    Location
    UK
    Posts
    5,072
    Local Date
    03-19-2024
    Local Time
    04:49 AM
    Thread Starter
    Quote Originally Posted by Vincent View Post
    It had never occurred to me the rounds would try to rotate in opposite directions.
    Presumably that's why the Sterling mag has 2 rollers incorporated into it's platform?

    The base plate of the Sterling mag which I happened to have on my bench visually looks very similar to that of the Sten, I happened to noticed over the weekend. I didn't check them to see if they are the same or if they are interchangeable but does anyone know if they actually are?

  15. #20
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-17-2024 @ 02:10 PM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,505
    Real Name
    Peter Laidler
    Local Date
    03-19-2024
    Local Time
    06:49 AM
    Not interchangeable. The two rollers in the Sterling mag were actually very slightly tapered to take into account the slight taper of the case and curvature of the magazine. This was another bit of sheer genius to come from George. He calculated mathematically the radius needed to ensure that the - anyway, it's all to do with the ackerman principle of angular travel and wotsit!

    Thinking out aloud, you'd think that after 1959 when India was producing thousands of Sterling magazines a day, that instead of modifying Sten mags, they'd just incorporate into the design a feature to make them useable in Stens. George Patchett had thought of that too in the design. He made sure that tight fisted nations couldn't just buy Sterling mags to make their Stens more reliable. Nope....., they had to buy Sterling guns in order to use Sterling magazines!

+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Similar Threads

  1. Sten gun marking
    By Topfmine in forum Other LMG/HMG and SMG Forum
    Replies: 22
    Last Post: 04-25-2014, 05:45 PM
  2. Long Branch with a star marking?
    By enfield303t in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 05-02-2013, 02:44 AM
  3. Pointed bullets in Lebel?
    By Aragorn243 in forum Ammunition and Reloading for Old Milsurps
    Replies: 5
    Last Post: 12-24-2012, 04:23 AM
  4. pointed op rod spring guide
    By Garandrew in forum M1/M2 Carbine
    Replies: 0
    Last Post: 12-09-2010, 06:00 PM
  5. Five pointed red star on my No4T chest
    By No4Mk1(T) in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 17
    Last Post: 10-20-2009, 06:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks