+ Reply to Thread
Results 1 to 8 of 8

Thread: .303 British, ROF Radway Green 1955, Shoot It or Save It?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Today @ 05:23 PM
    Location
    long island, ny
    Posts
    558
    Real Name
    Bill
    Local Date
    03-18-2024
    Local Time
    09:33 PM

    .303 British, ROF Radway Green 1955, Shoot It or Save It?

    I picked up this box of original .303 Britishicon ammo at a gun show recently.
    My research shows it was made at ROF Radway Green in 1955.
    At first I thought this might have been near the end of production of this round there but it
    seems production of the .303 was continued until 1973 so not even close to the end.
    My question to you good people is shoot it or save it? Does it have any value?
    It cost $20 usd for the box after a bit of negotiating. If he had more I would have taken it all.
    The seal on the box was broken before I bought it but it's complete and all matching headstamps.
    My next question, is this corrosive ammo? When I bought my first Enfield 40 years ago
    I was buying similar but with older dates ammo for $3 usd a box. My how times have changed.
    When cleaning at the end of a days shooting back then treating it as corrosive was automatic.
    As I remember this ammo shot excellent, never had a misfire and was very accurate. - Bill
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    03-15-2024 @ 10:43 AM
    Location
    Edgefield, SC USA
    Posts
    4,035
    Local Date
    03-18-2024
    Local Time
    10:33 PM
    It's good ammo as long as it's been stored well and seen minimal temperature extremes. Evidence of this is when it hang fires or the primers are dead altogether. It's loaded with cordite and has corrosive primers. Treat ALL ammo as corrosive and erosive and you'll be OK.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:51 PM
    Location
    Victoria BC
    Posts
    29,810
    Real Name
    Jim
    Local Date
    03-18-2024
    Local Time
    07:33 PM
    I don't think there's any special value. I'd go through it as needed. I expect it'll all be fine.

    I know a guy here that hangs onto ammo like it was his teeth. He'll never get through it all and instead of hoarding he should be shooting some. Eventually it will be all hangfire specials...
    Regards, Jim

  6. #4
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Today @ 08:42 AM
    Location
    South West Western Australia
    Posts
    7,730
    Real Name
    CINDERS
    Local Date
    03-19-2024
    Local Time
    10:33 AM
    Post WWII let her rip and boil the barrel straight away or as soon as possible to stop the salts getting really stuck in WWII - WWI stuff is collectible I am chasing some MW 42 stuff but like the rocking horse has bolted and you cannot find the poop anyway its that hard to get. Then you have your tracer, A.P, Incd on and on it goes then you've got the factories it just never ends.
    The only recommendation I will make do not use P.O.F (Possibility of Firing) it is cr*p of the highest order infact if I were the enemy one could feel fairly safe at 400m not really, I shot the stuff for a while 1967 vintage and I thought I was shooting a flintlock click - pause-bang-confetti everywhere-smoke-did I hit the target....................?

    As for your RG looks pretty good the annulus is sealed anyway there appears to be no corrosion seen on them, just take it as it comes like BAR says if it has been stored correctly then it should go ok but there may be some hangfires you just do not know.
    Last edited by CINDERS; 05-16-2017 at 12:36 AM.

  7. #5
    Legacy Member P246's Avatar
    Join Date
    Aug 2016
    Last On
    11-02-2022 @ 12:11 AM
    Location
    Osawatomie,Ks
    Posts
    122
    Local Date
    03-18-2024
    Local Time
    09:33 PM
    Pretty much whats been said except I also keep Korean War era ammo made by Allies that were still using the L.E in that conflict. As far As POFicon I got a bunch cheap and pull the bullets and reload them. Reloaded they do okay but are still plinkers as at any longer range too many will do strange things.

    If that were mine it would be used for my longer range shooting and clean accordingly. This is assuming it is still good and is not click bang stuff.

  8. #6
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Today @ 05:23 PM
    Location
    long island, ny
    Posts
    558
    Real Name
    Bill
    Local Date
    03-18-2024
    Local Time
    09:33 PM
    Thread Starter
    Thank You gentlemen, as stated I have shot similar ammo in the distant past and it always worked well. When I get a chance (hopefully this coming weekend) to get to the range and burn some of this up I'll post a report here. There is no water damage to the box or excessive tarnish on the rounds so I'm hoping for the best. - Bill

  9. The Following 2 Members Say Thank You to oldfoneguy For This Useful Post:


  10. #7
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    03-04-2024 @ 02:19 PM
    Posts
    1,807
    Local Date
    03-19-2024
    Local Time
    03:33 AM
    I wouldn't use it to go plinking, keep it for those days you want to have a good shoot. If you shoot 303 on a regular basis you could use it a base line to find an alternative that has similar properties to the original spec.

  11. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Outpost75's Avatar
    Join Date
    May 2017
    Last On
    07-23-2017 @ 04:37 PM
    Location
    Glengary, WV
    Posts
    9
    Local Date
    03-18-2024
    Local Time
    10:33 PM
    My experience with Uk MkVII ammunition is that the primer mix they use is less shelf-stable than what was used in US WW2-era cal. .30 and .45 ACP ammunition. I have been vastly disappointed with Cordite MkVII ammo made during the WW2 era into the late 1950s, as well as later production POFicon made into the 1960s, getting high percentages of misfires and hangfires.

    I have had similar poor experiences with WW2 era .455 and .380 Mk2z ammunition which was no good at all except for collector examples for photography.

    I would not waste my money on buying old Britishicon military ammo for the purpose of shooting it, if I did not know the conditions of storage. Recent production RG 7.62mm NATO made in the 1980s ammunition has been accurate and reliable, but I don't trust it for "long term" storage, it being already 30+ years old@!

    This has not been the case with DAQ, DAC, WRA and CAC ammunition, which was sure-fire. The most accurate and reliable military .303 ammunition I have is WRA Co. produced under Lend-Lease, which is still good, and the brass is reloadable.

    Similarly I am using FA Cal. 30 Ball M1icon ammunition made in the 1930s as well as DEN, UT, TW and LC of WW2 dates which is as reliable as it ever was, and .45 ACP Ball ammunition of various WW2 production, both steel and brass cased which has also been sure-fire and accurate.
    Last edited by Outpost75; 05-25-2017 at 05:14 PM.

+ Reply to Thread

Similar Threads

  1. Radway Green Ammo Question
    By Charlie in forum Ammunition and Reloading for Old Milsurps
    Replies: 21
    Last Post: 01-20-2019, 05:51 PM
  2. What .303 to shoot first Radway Green or HXP?
    By therno in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 04-14-2016, 09:17 PM
  3. Question about Radway-Green Ammo
    By Charlie in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 9
    Last Post: 06-18-2012, 02:44 PM
  4. Radway Green 1993 Group
    By Skip in forum Range Reports - Show us how good you are!
    Replies: 2
    Last Post: 07-16-2010, 10:31 AM
  5. Radway Green 308
    By Skip in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 07-05-2010, 06:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks