+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: WWII German Binoculars

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member RangeHound's Avatar
    Join Date
    Mar 2009
    Last On
    11-24-2023 @ 07:26 PM
    Location
    Oklahoma
    Posts
    49
    Real Name
    Ronald
    Local Date
    04-16-2024
    Local Time
    01:35 PM

    WWII German Binoculars

    I found these binoculars cleaning at my in-laws house. Initial research would indicate that they are WWII vintage. The case is not marked and I can't find a way to date the binoculars. I appreciate any input.

    Also, what are the tabs on the bottom for?

    Ron
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to RangeHound For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 04:38 PM
    Location
    UK
    Posts
    5,101
    Local Date
    04-16-2024
    Local Time
    08:35 PM
    It would seem that Hensoldt are still in business, in Germanyicon.

    Our Heritage : HENSOLDT


    I would guess that the tabs are so that the case can be clipped onto a bracket inside a vehicle, ship, aircraft, etc etc.
    Last edited by Flying10uk; 05-28-2017 at 07:23 PM.

  5. Thank You to Flying10uk For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 01:08 PM
    Location
    South West Western Australia
    Posts
    7,749
    Real Name
    CINDERS
    Local Date
    04-17-2024
    Local Time
    03:35 AM
    I am wondering if the small M denotes fit for "Marine" usage seems logical with the tabs being clipped to a bridge or fly bridge (in fine weather)

  8. #4
    Legacy Member matthanne1's Avatar
    Join Date
    Jun 2016
    Last On
    09-16-2023 @ 10:41 PM
    Location
    Illinois
    Posts
    214
    Local Date
    04-16-2024
    Local Time
    02:35 PM
    'Tis a wartime Bakelit case, whatever they were intended for otherwise, the clips on the back were used for straps to secure the case to the Tragegepaeck.
    The pic of the bino right tube cover shows a stripe- an you tell if it read Dienstglas at one time? Often there is other data on this tube side as well (H6400, etc)
    Bakelit is a thermosetting emulsion using material filler from sawdust to cloth fiber. I've run into various shades of the Bakelit cases, from red to black. It often depends on the maker and what they used for fiber to fill out the emulsion. There is usually a cast mark in the well with the Bakelit maker and mix type, the number above the 'M' is the manufacturer, the sideways number is the composition material. These were not usually cast with maker codes (that was already in the mark) nor with date codes. Nice find! Many of these have cracks from being dropped over the years.

  9. The Following 3 Members Say Thank You to matthanne1 For This Useful Post:


  10. #5
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 04:38 PM
    Location
    UK
    Posts
    5,101
    Local Date
    04-16-2024
    Local Time
    08:35 PM
    I don't recall seeing red/brown bakelite cases for sale before at militaria shows only black ones which always seem to be eye wateringly expensive. Perhaps the red/brown type is less common?

  11. #6
    Legacy Member matthanne1's Avatar
    Join Date
    Jun 2016
    Last On
    09-16-2023 @ 10:41 PM
    Location
    Illinois
    Posts
    214
    Local Date
    04-16-2024
    Local Time
    02:35 PM
    I've seen a lot of the black ones, granted, but over the years saw several others, two red/brown ones stick out in my memory- one was on a militaria display in Massachusetts in 1979 and one was basically trashed (had been crushed) for sale in a Berlin flea market when I was there in 1986-87. Guess they are less common after all!

  12. #7
    Legacy Member RangeHound's Avatar
    Join Date
    Mar 2009
    Last On
    11-24-2023 @ 07:26 PM
    Location
    Oklahoma
    Posts
    49
    Real Name
    Ronald
    Local Date
    04-16-2024
    Local Time
    01:35 PM
    Thread Starter
    Here's the mold mark inside.

  13. Thank You to RangeHound For This Useful Post:


  14. #8
    Legacy Member matthanne1's Avatar
    Join Date
    Jun 2016
    Last On
    09-16-2023 @ 10:41 PM
    Location
    Illinois
    Posts
    214
    Local Date
    04-16-2024
    Local Time
    02:35 PM
    My ref doesn't list "OF" as a yet known maker among hundreds, but the "T2" indicates Phenolic Resin with asbestos and other organic fibers as the filler material.

  15. Thank You to matthanne1 For This Useful Post:


  16. #9
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 04:38 PM
    Location
    UK
    Posts
    5,101
    Local Date
    04-16-2024
    Local Time
    08:35 PM
    Is that a "M.D." trade mark in a circle with "OF" above?

  17. #10
    Legacy Member matthanne1's Avatar
    Join Date
    Jun 2016
    Last On
    09-16-2023 @ 10:41 PM
    Location
    Illinois
    Posts
    214
    Local Date
    04-16-2024
    Local Time
    02:35 PM
    It is a 'pressmark', the official marking approved by the MaterialPruefungsAmt and used by members of the Germanicon phenolic resin manufacturing 'society', an agreed upon way to mark maker and material used in the composition. Started around 1930s, ended at the end of WW2. Top digraph is the maker code, lower is the composition. As some compositions looked like years (two numbers, eg 43 which was actually Dynamit AG), some people thought they were date codes. They are NOT date codes, just maker and composition.

  18. Thank You to matthanne1 For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. What is this WWII German 9MM ammunition and who was it for?
    By Garandy in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 04-03-2017, 10:41 AM
  2. Great WWII binoculars
    By Bob Womack in forum Vintage Military Gear
    Replies: 1
    Last Post: 09-04-2011, 11:19 AM
  3. Replies: 0
    Last Post: 08-04-2010, 07:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts