+ Reply to Thread
Results 1 to 4 of 4

Thread: Swiss 1882 and 1929 Revolver comparison

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 08:26 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-29-2024
    Local Time
    01:23 AM

    Swiss 1882 and 1929 Revolver comparison

    So I thought I would do a bit of a comparison between the Swissicon 1882 and 1929 revolvers. When the 1882 revolver was first developed it was one of the most modern revolvers in the world, even remaining more relevant than later designs *cough* 1895 Nagant *cough*. In 1900 the Swiss adopted the Luger, however they decided to still keep using the 1882 revolvers simply due to the fact it cost 1/3 the cost of a Luger. They just issued the 1882 to officers who wouldn't be likely in combat but still needed to have some sort of weapon (i.e. supply, etc.). In the late 20s the Swiss were looking to simplify there service arms to make them as inexpensive as possible (as Swiss service arms in general are always expensive). The results were the 1929 Luger, 1929 Revolver, and the K31.

    Overall I would say the 1929 is definitely a cheaper arm. It has some improvements (stronger frame, cheaper, easier to manufacture), but the quality isn't nearly as high as the 1882. Holding it, the 1929 is also much more 'squarish' than the 1882 and doesn't fit as nicely in your hand. That doesn't mean it is ineffective, simply that it isn't as nice. Well in any case here is some photos detailing some of the differences between the two.


    1882 on top, 1929 on bottom



    showing the differences in the ejector rods, as you can see the 1882 has a extra aligning portion over the 1929

    field stripping is the same between both

    The 1882 has a hinge and captive screw to keep the side plate attached, the 1929 uses a pin and a standard screw. The 1882 screw head is also a bit larger and easier to get a screwdriver for.

    1882s lockwork in the revolver

    1929s lockwork in the revolver

    1882 revolvers lockwork disassembled (note the numbering on the parts to tell you the order to disassemble)

    1929s lockwork disassembled (note the lack of numbering)

    Showing the difference in cuts in the revolver frames, 1882 on left, 1929 on right

    showing the difference in front sights, on the 1929 it is a simple blade which is windage adjustable, well the 1882 has a ball which is non-adjustable (I prefer the 1882 sights)



    Markings on the 1882, note the 'P36' stamp which signifies being sold out of service

    Markings on the 1929, I suspect this example was never issued as there is no wear anywhere.

    Nice swiss cross emblem on the 1929, the only real nicety added to the revolver system.

    These revolvers are a bit underappreciated, which is understandable. Ammo is next to non-existent, and they aren't necessarily common firearms to begin with. Overall though they are neat, and quite fun guns to play with.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 6 Members Say Thank You to Eaglelord17 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 11:11 AM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-29-2024
    Local Time
    06:23 AM
    A very interesting side by side comparison. Thanks for taking the time and effort to share this with us.

    The build quality of Swissicon Service Firearms is superb isn't it. I have a couple of friends who shoot K31's and they are beautifully finished pieces of precision engineering and a pleasure to shoot.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 08:26 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-29-2024
    Local Time
    01:23 AM
    Thread Starter
    The build quality is absolutely fantastic. The 1882 has likely the best trigger on a milsurp handgun I have ever handled (this particular example is from 1907), and everything is just smooth. The 1929 is still pretty good, just not as nice handling as the 1882 (due to simplifications).

  7. #4
    Legacy Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 08:59 PM
    Location
    USA
    Posts
    4,314
    Real Name
    Robert Seccombe
    Local Date
    03-29-2024
    Local Time
    12:23 AM
    Always wanted a Swissicon Model 1878 revolver in 10.4mm (I do not have a 10.4mm in my collection either)

+ Reply to Thread

Similar Threads

  1. 1929 Springfiels 10-29
    By sakorick in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 20
    Last Post: 04-28-2017, 07:00 PM
  2. Swiss Bayonet Comparison
    By Aragorn243 in forum Edged Weapons Forum
    Replies: 7
    Last Post: 07-12-2015, 04:42 AM
  3. reloading for steyr peabody martini 1882
    By jarmann in forum Black Powder
    Replies: 0
    Last Post: 08-02-2013, 10:21 AM
  4. 1882 RIA workers ID Token
    By Curt in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 3
    Last Post: 09-09-2011, 09:22 PM
  5. Enfield Model 1882 Mark 1 in .476 cal - $2,250 U.S.
    By Badger in forum Commercial Auction and Sale "Gossip"
    Replies: 0
    Last Post: 10-29-2006, 05:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks