+ Reply to Thread
Results 1 to 10 of 10

Thread: NEED HELP identifying a .50 BMG antitank gun

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Eagle76's Avatar
    Join Date
    Aug 2014
    Last On
    10-22-2017 @ 12:57 PM
    Location
    Palm Desert
    Posts
    6
    Local Date
    03-28-2024
    Local Time
    07:17 AM

    NEED HELP identifying a .50 BMG antitank gun

    I need help identifying a 50 caliber towed antitank gun - pictures attached. It is NOT a rebarrelled 37mm cannon nor a rebarrellAttachment 85971Attachment 85972Attachment 85973ed Britishicon two pounder. The piece is about two thirds the size of a 37 mm. The opening in the breach is the size of a quarter. Ergo it seems to be purpose built for .50BMG and entirely too small for 20mm and 37mm rounds. The scope is dated 1942 and obviously the shield is missing as well as the tires are obviously civilian tires. Further, the flash hider 'seems' to be an aftermarket addition(?).
    Does anyone seen one of these before and can tell me exactly what it is? (See photos #2, #4, & #4A)
    Feel free to call me or email if you have lengthy additional questions or an answer for me. I have numerous additional photographs.
    Thanks for the help. John, 714-654-5877 jcwhite007@gmail.com
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    03-28-2024
    Local Time
    09:17 AM
    That thing screams homebuilt to me....

  4. Thank You to WarPig1976 For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    Quote Originally Posted by WarPig1976 View Post
    homebuilt to me.
    I agree completely. Looks to have been cobbled by farmers. There was no need for a .50 gun of that type as the .50 MG was available and way better. The flash hider is issue for the MG. The cradle is the same one used on an armored vehicle for the .50 or the .30 cal.

    I'd love to wring it out just for yuks though.
    Regards, Jim

  7. Thank You to browningautorifle For This Useful Post:


  8. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Eagle76's Avatar
    Join Date
    Aug 2014
    Last On
    10-22-2017 @ 12:57 PM
    Location
    Palm Desert
    Posts
    6
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    Thread Starter
    If it is a home built, then someone put an astronomical amount of time in engineering and machine work just in building the breech block assembly much less the entire assembly. The transverse and elevating knobs look like military hardware but it strikes me me as something you'd see on a prototype or Mark I version. If an individual built this from scratch they would've been far smarter to copy the transverse and elevation mechanisms from the M3 37 mm, i.e. to design work has already been done - one only has to miniaturize it as the M3 is far more efficient and user-friendly than we find on this piece. All of that taken into consideration we have seen some very clever engineering and machine work by folks who miniaturized the Browning 30 caliber machine gun into a .22 caliber belt said device.
    Britishicon 2 pounder training device: it's been my experience in collecting over 50 years World War I and World War II small arms that training devices are usually the exact same dimensions as the genuine article with the exception of being sub caliber. However, I have not found a good picture of a towed British 2 pounder for comparison.
    Please keep those ideas coming.

    Further, the point was very well stated, what's the point of a device like this when the M2 MG was available and would obviously be for more effective and useful. So on the final analysis, it could very well be a home built.

  9. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    Quote Originally Posted by Eagle76 View Post
    If it is a home built, then someone put an astronomical amount of time in engineering and machine work just in building the breech block assembly much less the entire assembly. The transverse and elevating knobs look like military hardware but it strikes me me as something you'd see on a prototype or Mark I version. If an individual built this from scratch they would've been far smarter to copy the transverse and elevation mechanisms from the M3 37 mm,
    Agreed on all that. No one said they were being time effective, it was built by someone that had time and many parts to draw from. If you look deep enough, you'll find the guns that every part came from. I'll bet the barrel was originally an AN M2. All parts were scrounged and none designed, just mashed together. I was army all my life, my brother was artillery. They'd never tow something like this anywhere...this thing would be useless. As in no use at all to anyone. The .55 Boys anti tank rifle would be far more use.

    Sounds like you want to keep going until someone tells you he agrees with you that this is issue.

    By the way, here's a 2 PDR anti tank gun. Way bigger and stouter than this tiddly toy.

    The breech looks like it was taken mostly from the Hotchkiss Canon AC SA-L Mle 1937 APX 25mm...and the rest is fabricated. Here's pics of that too...compare the breech mech from this side with your first pic. many differences because almost everything is stripped off, recoil mech, supports...
    Last edited by browningautorifle; 07-17-2017 at 11:14 AM.
    Regards, Jim

  10. The Following 2 Members Say Thank You to browningautorifle For This Useful Post:


  11. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Eagle76's Avatar
    Join Date
    Aug 2014
    Last On
    10-22-2017 @ 12:57 PM
    Location
    Palm Desert
    Posts
    6
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    Thread Starter
    Jim, you make some very good points and thank you for the photographs. The photographs were very revealing Also, after my last entry last night I begin taking a closer look at my photographs and noticed when I zoomed in tight enough, it's not crystal clear, but it does appear some of the fasteners are Torx head. If they are Torx head then that almost certainly cinches it; this is a homemade device since the Torx head fasteners were not developed until the late 60s. Considering the physical evidence of the Torx head fasteners and the numerous arguments supporting a home built, I think it is becoming more and more obvious this is in fact a home built device! That being the case, after I have had he opportunity to fire 'X' number rounds through it, it begs the question, "what are your opinions of the value of this piece should I decide to sell it when it loses its novelty?" I GREATLY appreciate everyone's input.
    John

  12. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    I would just keep it and shoot it. Eventually someone will walk up to you on the firing line and have to buy it from you.
    Regards, Jim

  13. Thank You to browningautorifle For This Useful Post:


  14. #8
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    03-25-2024 @ 02:00 PM
    Posts
    1,807
    Local Date
    03-28-2024
    Local Time
    03:17 PM
    Looks like it may be crudely based on a spotting rifle, the cradle looks like it's from the M31C mount and I see the T&E from the M3 mount which looks welded in. The flash eliminator is from the M2HB. I suspect the rest maybe salvage from other systems. I wouldn't be surprised if it was some sort of reenactment piece used with blanks for public shows.

  15. Thank You to Brit plumber For This Useful Post:


  16. #9
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    Quote Originally Posted by Brit plumber View Post
    used with blanks for public shows
    Now THAT might be a possibility too...would make sense.
    Regards, Jim

  17. Thank You to browningautorifle For This Useful Post:


  18. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Eagle76's Avatar
    Join Date
    Aug 2014
    Last On
    10-22-2017 @ 12:57 PM
    Location
    Palm Desert
    Posts
    6
    Local Date
    03-28-2024
    Local Time
    07:17 AM
    Thread Starter

    Home built .50 Towed - Seeking parts for M3 37mm anti-tank

    In support of what all of you had said earlier, I received an email answer today from one of the directors the Canadianicon Juno Beach Centre (museum) who stated, this is clearly a home built device and the flash hider and barrel are from and M3 .50 aircraft MG. He also said, the scope is a 'Sherman direct fire sight'. He also thinks the site is installed backwards but as I recall the site pivots 180°. So the learning curve continues with more details about this home built. If anyone else has additional information to add that I would greatly appreciate hearing it.

    I do not know yet if the parts are available but I would like to convert the elevation and traversing system to that used on the M3 37mm antitank gun.. So if anyone knows off the top of your head where I can find these assemblies, please let me know. I've not had time to do any of that research yet. Once again, thank you for everyone's input.
    Cheers, John 714-654-5877

+ Reply to Thread

Similar Threads

  1. Help identifying KA-BAR
    By jp3isme in forum Edged Weapons Forum
    Replies: 1
    Last Post: 12-11-2016, 10:13 AM
  2. Help Identifying K98 in .22
    By IronRing in forum Mauser Rifles
    Replies: 9
    Last Post: 12-06-2016, 06:29 PM
  3. Replies: 0
    Last Post: 04-27-2012, 05:17 PM
  4. PTRS Antitank Rifle
    By MeatMarket in forum Soviet Bloc Rifles
    Replies: 3
    Last Post: 11-25-2011, 02:21 AM
  5. Need Help Identifying USN Ka-Bar
    By coolhandluke in forum Edged Weapons Forum
    Replies: 3
    Last Post: 10-25-2011, 10:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks