+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: 1903 or 1903-A3 headspace issue?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member flintlock28's Avatar
    Join Date
    Aug 2016
    Last On
    04-04-2023 @ 09:41 AM
    Location
    Delaware, USA
    Age
    59
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    04:32 AM

    1903 or 1903-A3 headspace issue?

    A relative of mine has either a 1903 or 1903-A3 that has been Sporterized. He lent the rifle years ago to another relative, and is now getting it back. The relative told Him that it has a headspace issue. I told Him I would look at it, and I purchased Clymer go, no-go, and a field gauges.

    If the barrel turns out to be in good condition, but the bolt does close on the Field gauge, would trying another bolt body be the first step in correcting excessive headspace? I read somewhere that Brown & Sharp bolts tend to run long, and I'm wondering if this is the first step to take?

    Any help appreciated.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 01:40 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-28-2024
    Local Time
    10:32 AM
    Find out why the lender thinks there is a "headspace issue", eg what did he do to the rifle to cause it?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member flintlock28's Avatar
    Join Date
    Aug 2016
    Last On
    04-04-2023 @ 09:41 AM
    Location
    Delaware, USA
    Age
    59
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    04:32 AM
    Thread Starter
    Quote Originally Posted by Daan Kemp View Post
    Find out why the lender thinks there is a "headspace issue", eg what did he do to the rifle to cause it?
    My Brother in Law owns the rifle; He lent it out years ago to another relative. Whoever he lent it to, is the one who said it has headspace issues. I have no idea if the man he lent it to is competent, incompetent, or had the rifle checked out. I told my BIL that I would get gauges, and check it out. Supposedly, I will be getting the rifle in a few days.

    Is it common when headspace is excessive, to try a new bolt body?

    Let me know your thoughts.
    thanx

  6. #4
    Contributing Member Doco overboard's Avatar
    Join Date
    Jun 2015
    Last On
    Yesterday @ 04:48 PM
    Location
    Delmarva Peninsula
    Posts
    452
    Real Name
    Brian Stiles
    Local Date
    03-28-2024
    Local Time
    04:32 AM
    I was able to tidy up HS by fitting a WW2 replacement bolt on a 03 with a high Standard replacement barrel. The first bolt was OK on the field but I was lucky enough to find a nos bolt that worked well the first time around.
    The problem with this is you may need a large selection of bolts in front of you to choose from. I used a bf42 and there was some improvement, if it didn't work I wasn't too concerned because I could use the bolt elsewhere.
    I'm talking only a couple of degrees of rotation to where the knob stopped as a feel good measure, check to make sure there isn't something else going on that could be more problematic.

    It could just be someone doesn't want to turn the rifle back over either!

  7. #5
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    03-28-2024
    Local Time
    03:32 AM
    I agree that a BF bolt would likely help. But is there a problem? Maybe, maybe not. Strip the bolt, remove the extractor and run the test. Remember, do not force the gages, any resistance and you are there. Good luck.

  8. The Following 2 Members Say Thank You to Calif-Steve For This Useful Post:


  9. #6
    Legacy Member flintlock28's Avatar
    Join Date
    Aug 2016
    Last On
    04-04-2023 @ 09:41 AM
    Location
    Delaware, USA
    Age
    59
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    04:32 AM
    Thread Starter
    Thanks, i'm looking forward to trying out the gauges.

  10. #7
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:08 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,150
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    02:32 AM
    Bolt set back is a common issue with headspace..
    a new bolt..{not used from another rifle } would likely cure it.
    R4 R6 R8 bolts are longer at the head then others and were made that way.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  11. Thank You to Chuckindenver For This Useful Post:


  12. #8
    Legacy Member flintlock28's Avatar
    Join Date
    Aug 2016
    Last On
    04-04-2023 @ 09:41 AM
    Location
    Delaware, USA
    Age
    59
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    04:32 AM
    Thread Starter
    Thank you everyone for the replies...

    Turns out the rifle is NOT a Springfield 1903 or 1903-A3, but a M 1917 Enfield, Eddystone made rifle, built in 1918. I saw as soon as it was out of the gun case, that it wasn't a Springfield.

    The rifle looks in very good shape, with the barrel cut down to about 21 inches, and probably an aftermarket stock installed. I believe the stock is stamped "Leaders" near the barrel channel.

    I found that the No-Go gauge did allow the bolt to fully close, but the bolt would not close on the Field gauge. I believe this shows the head space is on the long side, but still safe to shoot I am going to go over the rifle, use a copper remover to clean the bore, check everything over, and than take it to the range where I will try some Garandicon ammo that a buddy gave me. I will than examine every case to make sure everything looks o.k.. If the rifle shoots o.k., I'm going to refinsh the stock using Lacquer, and than use Cold bluing on all metal.

    Does this sound Kosher?

  13. #9
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    Yesterday @ 11:56 AM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-28-2024
    Local Time
    03:32 AM
    Surface prep is key with the cold blue. Degrease *very* well, apply multiple coats, and oil it well.
    I used Oxpho-Blue on the top of a Colt 1911 from 1953 where I had to plug holes from an aftermarket sight rail. The color matched well and it’s has stood up to lots of range time. Can’t really say how it wears since I don’t carry the gun but it hasn’t rubbed off from simple handling.

  14. #10
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 08:56 PM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-28-2024
    Local Time
    04:32 AM
    The two gauges that matter for headspace to the general shooter is 'go' and 'field' (should be called 'Min' and 'Max'). That is where the tolerances are for the cartridge. In this case provided it didn't close on the 'field' gauge and closes on the 'go' gauge your set in regards to headspace.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 1903 Feeding Issue
    By creeks in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 19
    Last Post: 06-11-2014, 12:59 PM
  2. SRS Check 1903 Dated 1926 NM 1903 Serial # 1272809
    By samnev in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 6
    Last Post: 08-31-2013, 12:01 PM
  3. Hey all 1903 Lovers : See July 20 Shotgun News 1903 Springfield Article
    By tomwatts in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 11
    Last Post: 07-15-2012, 04:20 PM
  4. Excess Headspace in the 1903 and '03A3 Springfield
    By Newsfeed Hound in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 13
    Last Post: 10-29-2011, 11:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks