+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27

Thread: 175 gr Nosler RDF bullets

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    03-20-2024 @ 11:49 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    03-28-2024
    Local Time
    09:51 AM

    175 gr Nosler RDF bullets

    Has anyone used these in their milsurp reloading?

    I'm wondering particularly how it would work in 7.5 Swissicon. It has a high BC...higher than the Berger 175 gr VLD, which is often compared favorably to the GP11 projectile.

    https://www.midwayusa.com/product/10...oint-boat-tail
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member speckles's Avatar
    Join Date
    Feb 2015
    Last On
    02-23-2024 @ 05:42 PM
    Location
    west tn
    Posts
    180
    Real Name
    andy L
    Local Date
    03-28-2024
    Local Time
    11:51 AM
    I have tried the Berger's and they are ok.... I have my best results with smk bthp 168's With imr 4895 (44grains) worked very nicely.... submoa. I tried 175 smk's but they were not as good. Oh, and I used berdan primers. Powder valley had them on sale last year or 2 and I bought 10,000 of them 😳. Why, idk other than I knew they would be a rare finding in the future. Then at the height of my work-up, gp11 miraculously appeared on the market and I bought a lot to last for years. To answer your question, the bergers were not worth the extra bit of money. Greats results with Sierra match king

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    03-25-2024 @ 11:01 AM
    Location
    South West Western Australia
    Posts
    7,734
    Real Name
    CINDERS
    Local Date
    03-29-2024
    Local Time
    12:51 AM
    As a side note Sierra 6.5mm 142gn Match are now $104/100 here where as the 140 VLD Bergers are $72/100 which one would you buy!
    Whilst the SMK's work well so do the Berger VLD's out of my 6.5 x 284 and I sure as eggs cannot justify the extra $32 just because its name is Seirra........

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    maxim's Avatar
    Join Date
    Feb 2011
    Last On
    @
    Location
    Michigan, The Colonies
    Posts
    70
    Local Date
    03-28-2024
    Local Time
    11:51 AM
    Best fortune with 168 SMK and 4064. Same load with Nosler 168 produced the same group but shot 3" lower for some reason.

  7. #5
    Legacy Member RC20's Avatar
    Join Date
    Dec 2012
    Last On
    02-07-2022 @ 09:20 PM
    Location
    Alaska
    Posts
    316
    Local Date
    03-28-2024
    Local Time
    07:51 AM
    I have 175 Nossler Match, but not the RLD, those were ok.

    The Sierra 175 M shot better.

    I would like to see a GP11 bullet profile compared to the others.

    From what I can tell, it seems to be fatter not longer, LD type. Probably will pull one out so I can see it.

    Maybe put it on the coppier with the Nossler and Sierra 175 and see what I get.
    Last edited by RC20; 01-21-2018 at 07:19 PM.

  8. #6
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    03-20-2024 @ 11:49 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    03-28-2024
    Local Time
    09:51 AM
    Thread Starter
    Quote Originally Posted by maxim View Post
    Best fortune with 168 SMK and 4064. Same load with Nosler 168 produced the same group but shot 3" lower for some reason.
    I've done pretty well with that combo in my 1911's...43.9 grs of 4064 and 168 gr Nosler CC's

    ---------- Post added at 05:42 PM ---------- Previous post was at 05:41 PM ----------

    Quote Originally Posted by speckles View Post
    I have tried the Berger's and they are ok.... I have my best results with smk bthp 168's With imr 4895 (44grains) worked very nicely.... submoa. I tried 175 smk's but they were not as good. Oh, and I used berdan primers. Powder valley had them on sale last year or 2 and I bought 10,000 of them 😳. Why, idk other than I knew they would be a rare finding in the future. Then at the height of my work-up, gp11 miraculously appeared on the market and I bought a lot to last for years. To answer your question, the bergers were not worth the extra bit of money. Greats results with Sierra match king
    I've had good luck with 168's and 4064 in my 1911's. My K-31's seem to like 175's and Re-17 better

    ---------- Post added at 05:45 PM ---------- Previous post was at 05:42 PM ----------

    Quote Originally Posted by CINDERS View Post
    As a side note Sierra 6.5mm 142gn Match are now $104/100 here where as the 140 VLD Bergers are $72/100 which one would you buy!
    Whilst the SMK's work well so do the Berger VLD's out of my 6.5 x 284 and I sure as eggs cannot justify the extra $32 just because its name is Seirra........
    Damn...

  9. #7
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    03-20-2024 @ 11:49 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    03-28-2024
    Local Time
    09:51 AM
    Thread Starter
    Quote Originally Posted by RC20 View Post
    I have 175 Nossler Match, but not the RLD, those were ok.

    The Sierra 175 M shot better.

    I would like to see a GP11 bullet profile compared to the others.

    From what I can tell, it seems to be fatter not longer, LD type. Probably will pull one out so I can see it.

    Maybe put it on the coppier with the Nossler and Sierra 175 and see what I get.
    Ehh, don't bother...

    Various 175 gr .308 bullets compared to the GP11 projectile


    Sierra MK, Nosler CC, Barnes MB, GP11

    ---------- Post added at 06:41 PM ---------- Previous post was at 06:39 PM ----------

    Quote Originally Posted by speckles View Post
    I have tried the Berger's and they are ok.... I have my best results with smk bthp 168's With imr 4895 (44grains) worked very nicely.... submoa. I tried 175 smk's but they were not as good. Oh, and I used berdan primers. Powder valley had them on sale last year or 2 and I bought 10,000 of them 😳. Why, idk other than I knew they would be a rare finding in the future. Then at the height of my work-up, gp11 miraculously appeared on the market and I bought a lot to last for years. To answer your question, the bergers were not worth the extra bit of money. Greats results with Sierra match king
    What method did you use to decap the GP11 brass?

  10. #8
    Legacy Member speckles's Avatar
    Join Date
    Feb 2015
    Last On
    02-23-2024 @ 05:42 PM
    Location
    west tn
    Posts
    180
    Real Name
    andy L
    Local Date
    03-28-2024
    Local Time
    11:51 AM
    Quote Originally Posted by Calfed View Post
    Ehh, don't bother...

    Various 175 gr .308 bullets compared to the GP11 projectile

    https://www.milsurps.com/images/impo.../KJUYrHf-1.jpg
    Sierra MK, Nosler CC, Barnes MB, GP11

    ---------- Post added at 06:41 PM ---------- Previous post was at 06:39 PM ----------



    What method did you use to decap the GP11 brass?
    RCBS berdan depriming tool. relatively easy and quick, maybe not as fast as the hydrolic method but fast enough.

  11. #9
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    03-20-2024 @ 11:49 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    03-28-2024
    Local Time
    09:51 AM
    Thread Starter
    Quote Originally Posted by speckles View Post
    RCBS berdan depriming tool. relatively easy and quick, maybe not as fast as the hydrolic method but fast enough.
    I've got one of those RCBS Berdan decapping tools...never really figured out how to get it to work

  12. #10
    Legacy Member speckles's Avatar
    Join Date
    Feb 2015
    Last On
    02-23-2024 @ 05:42 PM
    Location
    west tn
    Posts
    180
    Real Name
    andy L
    Local Date
    03-28-2024
    Local Time
    11:51 AM
    Quote Originally Posted by Calfed View Post
    I've got one of those RCBS Berdan decapping tools...never really figured out how to get it to work
    Give me a day or two and I can post a video. The persnickety part is setting the pin to correct depth. That's just requires a few decaps to get to correct depth. Once set, it's bang, bang, bang..... not literally unless you have live primers.��

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Nosler RDF projectiles
    By CINDERS in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 03-13-2017, 05:27 AM
  2. About those bullets........
    By Bruce_in_Oz in forum Ammunition and Reloading for Old Milsurps
    Replies: 58
    Last Post: 01-14-2017, 03:28 PM
  3. Nosler's new 200 grain Custom Competition .323bullets
    By Calfed in forum Ammunition and Reloading for Old Milsurps
    Replies: 0
    Last Post: 11-28-2011, 02:12 PM
  4. Need bullet advice:Nosler vs SMK vs Hornady
    By M1Riflenut in forum Ammunition and Reloading for Old Milsurps
    Replies: 8
    Last Post: 03-07-2009, 11:19 PM
  5. 455 bullets
    By JHC II in forum Ammunition and Reloading for Old Milsurps
    Replies: 10
    Last Post: 05-10-2007, 06:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks