+ Reply to Thread
Results 1 to 4 of 4

Thread: How to ID MkII piston post??

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member TactAdv's Avatar
    Join Date
    Apr 2014
    Last On
    01-17-2024 @ 02:44 AM
    Location
    NE Colorado, USA
    Posts
    236
    Real Name
    Thomas T. Hoel
    Local Date
    03-29-2024
    Local Time
    07:24 AM

    How to ID MkII piston post??

    Riddle me this....

    How does one easily telll from external examination the Mk II post from the Mk I???

    Am I correct in assuming that you CANNOT interchange Mk I & Mk II PLUNGERS.....I.e, one cannot use a short Mk I plunger in Mk II post??

    -TomH
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-29-2024
    Local Time
    04:24 PM
    Difficult externally! But internally, the Mk2 post has a deeper hole internally for the longer piston post plunger. You could use a shorter Mk1 plunger in a Mk2 piston post but to achieve what? If you use a long PP plunger in a Mk1 PP, the end of the rod batters the end of the shallow housing and causes mayhem and jambs the spring onto the rod. This was all done to further cushion the violent unolocking cycle and help cure the high attrition rate of PP springs. It sort-of helped but the attrition rate remained high, even up to the last L4 Bren era. That's the reason why a spare PPspring was always part of the spare parts wallet.

  4. Thank You to Peter Laidler For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member TactAdv's Avatar
    Join Date
    Apr 2014
    Last On
    01-17-2024 @ 02:44 AM
    Location
    NE Colorado, USA
    Posts
    236
    Real Name
    Thomas T. Hoel
    Local Date
    03-29-2024
    Local Time
    07:24 AM
    Thread Starter
    Quote Originally Posted by Peter Laidlericon View Post
    Difficult externally!
    Thanks, Peter. I guess I knew the internal differences, but what is a dilemma over here is that when I see one for sale no one here really is conversant enough USUALLY to make the definitive examination of the plunger hole depth, so they are advertised devoid any identification of Mark.

    It matters to me- I'm shooting my original MK II MG a lot and I'm not looking for any more MK I piston posts!! I have a box of MK I posts I don't want, and was trying to see if there's a visual I.D. way to know before I go buy more.....

    Plunger springs I have plenty of!!
    -TomH

  7. #4
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-29-2024
    Local Time
    04:24 PM
    You could just deepen the hole to suit. It wasn't a feasible option in the 40's but now, with better quality drill bits they'd drill down easily I'd say.

    The reason for the change started when the gas port was opened up in the Mk1* barrels and Mk2 gas plugs. It gave more gas but that in itself caused a more violent unlocking/primary extraction. Hence the need for a more cushioned PP spring and plunger. This violent action was also the reason for the double return springs and later on, caused the buffer plate to crack in a circle around the face. That is the reason why we always polished the front face of the buffer plate, so that you could immediately see whether it had started to crack or break.

  8. Thank You to Peter Laidler For This Useful Post:


+ Reply to Thread

Similar Threads

  1. No.32 MkII with cross wires graticule not post & crosswire
    By desperatedan in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 07-12-2015, 01:47 PM
  2. Bren Piston Post
    By DOD 7.62 in forum The Bren LMG (Light Machine Gun)
    Replies: 3
    Last Post: 01-03-2013, 06:16 PM
  3. Gas piston nut, help?
    By Garandrew in forum M1/M2 Carbine
    Replies: 0
    Last Post: 01-01-2011, 08:17 AM
  4. Gas piston nut
    By bearhunter in forum M1/M2 Carbine
    Replies: 0
    Last Post: 11-27-2010, 02:08 AM
  5. Gas Piston
    By rocky321 in forum M1/M2 Carbine
    Replies: 4
    Last Post: 11-06-2010, 11:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks