+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Lee Carbine Identification and stock disc ID

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member AD-4NA's Avatar
    Join Date
    Dec 2014
    Last On
    03-20-2024 @ 03:08 PM
    Location
    USA
    Posts
    161
    Local Date
    03-28-2024
    Local Time
    02:08 PM

    Lee Carbine Identification and stock disc ID

    I've found a sporterized lee carbine I'm interested in but I can't tell what it was originally before it was cut down and I suspect the stock disc was just added to spice things up a bit. Unfortunately it is missing the nosecap, handguard, 2/3rds of the forend, the cutoff, the magazine and link and maybe the band if it had one. I know it was originally a Lee Enfield Carbine Mk1*, made at Enfield of course but I don't know if it stayed in that configuration or if was converted into an Irish Constabulary (RIC) carbine. It certainly has no New Zealandicon markings. As an aside though, why on earth would bubba need to sporterize something that is short and light already? Ridiculous.

    Firstly, it is in the U.S. and I don't know if many Lee or Metford carbines made it here that were not later sales of RIC carbines (versus Canadaicon). The numbers are all matching on what is left at least, but it displays no upgrade or additional arsenal markings anywhere or on either wrist. Wouldn't the RIC carbines have some kind of stamp added to the wrist when they went through Enfield/Birmingham again? The butt does not help in that regard either since it has the remnants of a roundel but it is illegible unless it could be enhanced.

    The muzzle shows no discernible wear in the blueing that would hint towards which type of nosecap was on it or whether both were and it shows no sign of the bushing for the bayonet for the RIC carbines having been sweated or brazed on. This could be a sign since I would think this would have been a little hard to remove or at least too much work to bother with. Another contradictory sign is that the screw holes for the original carbine leather rear sight protector are filled in with rather old looking walnut. It has the wrong rear sight from a rifle apparently also, as I swear the sight leaf was only marked to 1800 yards rather than the 2000 yarder for the carbine.

    The butt stock was cut out for a rear sling swivel on the bottom (not a Metford Bar) but I am a little suspicious of it not being from a legitimate RIC conversion. Firstly there is a matching longitudinal cut out in the butchered forend from the sporterization for a forward sling swivel and secondly the hole in the butt is cut very shallowly and milled very roughly in comparison to the many well made SMLE butts I have seen. Finally, the stock disc does not help in determining what the carbine was since it does not have marks for either a typical cavalry carbine or an RIC carbine and is dated very late for any Lee carbine. My guess is it is Indian and added when those got imported in because the original was missing. It is marked:

    RP
    3.17
    (The Screw)
    KL 105

    I am pretty sure it was marked "RP" and not "RF", the rest was clear anyway.
    Unfortunately I can't get any pictures again unless you all egg me into buying it...
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by AD-4NA; 04-05-2018 at 02:03 AM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 06:54 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-29-2024
    Local Time
    12:08 AM
    Photos or it doesn't exist.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member henry r's Avatar
    Join Date
    May 2015
    Last On
    09-20-2021 @ 07:13 AM
    Location
    northern tablelands nsw Australia
    Posts
    633
    Real Name
    henry.
    Local Date
    03-29-2024
    Local Time
    09:08 AM
    Do it. It's a LEC. They don't come up every day and... its a LEC!

    If you buy it and decide you don't want it in 6 months time, you can sell it.
    If you don't buy it and decide you want it in 6 months, it will be long gone.

    englishman_ca can sort you out for most of the missing bits or point you in the direction of the info to make them.

    As a start check out the illustrations at the bottom.

    http://www.rifleman.org.uk/Instructi...20-%201897.htm

    Magazine mods:

    http://forums.nitroexpress.com/showflat.php?Cat=0&Number=310879&an=0&page=0#Post310879
    Last edited by henry r; 04-05-2018 at 07:47 AM.

  6. Thank You to henry r For This Useful Post:


  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    12-14-2023 @ 03:21 AM
    Location
    UK / South Africa
    Posts
    942
    Local Date
    03-28-2024
    Local Time
    11:08 PM
    On the other hand, I would suggest caution = post pics here for the experts, before you buy. The rifle rear sight rings alarm bells that this may be made up of more than one rifle; also suggested by the March 1917 dated stock disc.

  8. #5
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    03-28-2024
    Local Time
    06:08 PM
    https://www.milsurps.com/showthread.php?t=57200

    Depends on what form you want it take when you are finished fixing it up, totally original and to spec or as a replica and tribute to your favourite flavour of carbine.

    Absolutely anything is repairable with enough effort, just perhaps not restorable.

    Being an LEC Mk.I*, it was not a Canadianicon service arm.

    Butt stock disc might well be correct. RawalPindi Arsenal, India, March 1917.
    King's Lancers (18th King George's Own Lancers) Rack number 105

    The markings in the metalwork would give more clues to where it has or has not been.
    You have not given us a lot to go on other than a general description. The story will be in the details. Sounds like it was a cavalry carbine.

    The wood repair to the sight cover screw holes could be Indian. The Enfield factory RIC repair was a round plug.
    I could tell you if the gun was once an RIC carbine with one glance.
    The RIC conversions had one factory inspector stamp in one particular spot, which is not obvious unless you look closely for it.

    If you are seriously considering buying, go get photographs so that we can identify. As a group, we are always happy to be of help.

    I have a number of original and restored carbines and I also have a couple of sportered carbines.
    The sporters work so well as bush guns, they will stay that way for the foreseeable future.

    Go buy the thing.
    Last edited by englishman_ca; 04-05-2018 at 02:54 PM.

  9. Thank You to englishman_ca For This Useful Post:


  10. #6
    Legacy Member AD-4NA's Avatar
    Join Date
    Dec 2014
    Last On
    03-20-2024 @ 03:08 PM
    Location
    USA
    Posts
    161
    Local Date
    03-28-2024
    Local Time
    02:08 PM
    Thread Starter
    Thanks englishman! If I do get it I would restore it to whatever is the most correct for it which is always my goal whenever I am restoring various items.

    I assume you guys are mentioning magazine modifications because original 6 rounders are impossible to find?

    Was the Indian Army using carbines that late? I always assumed that the first echelons such as the cavalry waiting on standby on the western front were fully equipped with the ShtLE in addition to the ANZAC cavalry and maybe only some artillery units had them. In comparison the Constabulary decided their carbines were obsolete just a few years after their last order of them (albeit after the war).

    I have always been interested in the use of what American Ordnance would call substitute standard weapons in both World Wars; such as the use of carbines, long lees and Mk1's the first time around and examples like the rebuilding of trials rifles or the Home Guard using P'14s and MK Vs in World War II.

    Does anyone have any recommendations for books which cover that sort of thing?
    Random samplings of archival photographs are not quite the same.

  11. #7
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    03-28-2024
    Local Time
    06:08 PM
    Figuring out the past history of any service arm is often like detective work. There could be any number of scenarios with that carbine.
    But after generations of civilian ownership, who knows what is actually original from service or what has been switched out by previous owners or has been replaced to keep the thing shooting.

    The butt disk could be from another rifle, yes, as could the butt. We can only scrutinise and make our best guess. No solid reason to think that it was ever in India, but it is possible. That is why we need to see any and all markings on the thing to figure out where it has or hasn't been.

    Does it have any govt ownership markings? Any civilian proof markings? Any import marks? Anything struck out? What fonts were used in any of the markings? Are there any markings in the metal or are they in the wood?, and where in the wood? Lots of questions....

    The carbines although obscolete in the Britishicon Army at that late a date, were still doing service with the colonies and other members of the Commonwealth.

    Canadaicon still had carbines in stores until the great purge in 1925, but even then, the Mounties still used cav carbines for mounted training right up into the 1960s.

    THE book to get is 'A century of Lee Metford and Lee Enfield Riflesicon and carbines' by Ian Skennertonicon.

    'The Lee Enfield Rifle by major E.B.Renolds', it is a bit dated now, but it can be found in digital form.

    Charles L Stratton has written other great resources too.

    Check the resource section of this site.

    Lots of information on the net, lots of miss-information too!

  12. #8
    Legacy Member AD-4NA's Avatar
    Join Date
    Dec 2014
    Last On
    03-20-2024 @ 03:08 PM
    Location
    USA
    Posts
    161
    Local Date
    03-28-2024
    Local Time
    02:08 PM
    Thread Starter
    Oh yeah, had those you listed for a while now. I try to make it a habit to buy the book before the expensive mistake...

    I was thrilled to run across a copy of Skennertonicon's "The Broad Arrow" at a show just today since I wanted a copy, until I opened the leaf and saw they wanted 200 dollars for it! I knew they were out of print but I did not think they were that rare.

  13. #9
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    03-28-2024
    Local Time
    06:08 PM
    Two hundred dollars is not unusual for that book.

    I have been on the hunt for one, that is probably what I will end up paying.

  14. #10
    Legacy Member AD-4NA's Avatar
    Join Date
    Dec 2014
    Last On
    03-20-2024 @ 03:08 PM
    Location
    USA
    Posts
    161
    Local Date
    03-28-2024
    Local Time
    02:08 PM
    Thread Starter
    Ha! Bringing this thread back because I answered my own question perusing through Skennertonicon one day:

    Quote Originally Posted by AD-4NA View Post
    and is dated very late for any Lee carbine
    Quote Originally Posted by AD-4NA View Post
    Was the Indian Army using carbines that late?
    On P.363:
    [Indian rifles were approved for updating to Mk VII ammunition on 31st May 1920]

    "Somewhat similar alterations were applied to the Lee-Enfield Cavalry Carbine, for the .303 Mk VII ammunition; it was approved on 3rd April 1924 and the required changes effected at Ishapore. This conversion comprised-
    1. Barrel: small cone enlarged.
    2. Sight bed: graduations deleted and re-inscribed for ranges at 200, 300, 400, 500 and 600 yards, according to the
    sealed pattern.
    3. Sight leaf: the graduations deleted and re-inscribed at 7, 8, 9 and 10 as on the pattern.
    The carbines were marked "HV" and "SC" immediately behind the back sight."

    So the Indians at least were still bothering with Lee Enfield carbines, even at this late date. Not that means anything about the stock marking disc in this particular case. I don't believe the carbine from a couple years ago was Indian and I rarely trust the authenticity of a butt marking disk.
    But it is interesting that the carbines were still in service somewhere in the empire.
    Last edited by AD-4NA; 04-11-2021 at 07:58 AM.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Disc Identification
    By tsquared82 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 06-09-2017, 05:27 PM
  2. Budapest M95 carbine stock 'disc'.
    By Anzac15 in forum Milsurps General Discussion Forum
    Replies: 7
    Last Post: 09-10-2015, 06:22 PM
  3. SMLE MkIII Butt Disc Identification.
    By Buccaneer in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 8
    Last Post: 06-22-2014, 04:23 AM
  4. Cavalry Carbine stock disc ID please?
    By RobD in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 02-24-2013, 09:41 AM
  5. stock disc help
    By albert in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 04-14-2012, 04:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks