+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24

Thread: Lanchester barrel question

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    ProLibertate's Avatar
    Join Date
    Aug 2017
    Last On
    08-10-2018 @ 09:06 PM
    Location
    Santa Cruz Mountains
    Posts
    7
    Local Date
    03-28-2024
    Local Time
    01:43 PM

    Lanchester barrel question

    I'm building up a semi-auto Lanchester from original, Indianapolis Ordnance and hand built parts. I've never held a Lanchester barrel in my hand; I've only seen pictures. As I live in CA, building an SBR is entirely out of the question for me (as is moving out of this state for a few more years) and I'm reluctant to buy an original barrel and get charged with constructive possession.

    So.... I'm building my own 16"+ barrel based on a gunsmith blank from Green Mountain Rifle Barrel company.

    In looking at all the pictures of original barrels that I can find, on the chamber end, eject side, there is a flat machined. I've been looking at my receiver tube and semi-auto bolt assembly. I juts don't see why there is a flat. There is no feature in the tube that needs be cleared and no feature on my bolt that needs that space either.

    Why is the flat there? What am I missing?

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-28-2024
    Local Time
    08:43 PM
    Only reason for the machined recess is for the clearance of the extractor claw?
    Last edited by bigduke6; 05-29-2018 at 06:53 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    10:43 PM
    Anyone from the Sterling Lanchester clan want a quick history lesson? I don't really know what that flat is for either but I do know that when Sterling started to make the Patchett Sterling guns, they started off with 6 thousand or so part finished Lanchester barrels in various stages. So when the opportunity arose, they completed them by rotating that flat around to the bottom of the barrel. They claimed that the reason for this was that any sand or whatever would get pushed forwards by the breech block and be pushed UNDER this flat and out of harms way into the void of the front barrel casing. Have a look at a Sterling barrel and you'll see.

    Alas, the reality didn't quite match the hype........... Because while sand, grit and other debris might get pushed forwards, it just fell into the far LARGER oval opening behind this little gap - right into the trigger mechanism! But it stayed the course and the legend lived on.

    This little gap also caused a bit of a problem when Patchett (and a major part by Bert LIST don't forget...) were formulating the Mk5/L34. High pressure gas venting from the ported barrel was leeching through this gap and into the mechanism. Something you definitely DON'T want!. So they solved this by re-designing the rear barrel stop/support to accommodate a small locator. Now, the Mk5/L34 barrel flat seats/locates on this locator flat which also seals the gap. All a reminder of its Lanchester ancestry.

    Another bit of useless Lanchester and Sterling history

  6. The Following 3 Members Say Thank You to Peter Laidler For This Useful Post:


  7. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:43 PM
    Peter, doesn't that flat spot sit on the right hand side of the gun, at the 3 o'clock position?
    Regards, Jim

  8. #5
    Legacy Member Archilochus's Avatar
    Join Date
    Sep 2017
    Last On
    02-01-2023 @ 01:52 PM
    Location
    South New England
    Posts
    15
    Local Date
    03-28-2024
    Local Time
    04:43 PM
    On the barrel I made for my Lanchester semi-auto (posted in an earlier thread here), I just omitted that flat, since I could not figure out any purpose for it. Works fine. I used a STEN-type extractor - maybe there's some difference with the original Lanchester type that requires the flat be there?

    BTW - It's probably not "legally" required, but to keep 'the man' happy, I'd suggest making your barrel threads different than the original, so that an original short barrel can not be dropped in. Or maybe that IO tube is reduced diameter, which would take care of that.
    Last edited by Archilochus; 05-29-2018 at 01:03 PM.

  9. #6
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-28-2024
    Local Time
    08:43 PM
    Well you learn something everyday........I thought it was due to being a direct copy of the MP28, in which the extractor stands slightly proud of the bolt.

  10. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    10:43 PM
    The flat is at the bottom on the Sterling BAR. The Lanchester extractor is anchored about 1.5" rearwards of the extractor claw and is retained by being pressed in a hole. Over engineered and prone to breaking. A modified extractor was made with better steel and heat treatment and marked M on the shank. Academic here but it doesn't stand proud of the bolt (well, it might be a few .001"s or so but the claw end was shaped to fit into that wide slot. Don't tell anyone I told you, but just use a Sterling Mk4 breech block, reposition the cocking handle by grinding away the .014" deep case hardening and drilling a new hole - and be done with it!

    We used to rebuild loads of these for the Aust, NZ and Royal Navy that came in from the big NoD at Sembawang. They were part of the coastal patrol boats and submarines and were usually minging. But once they'd gone through the system they were as good as gold. Good fun range testing them because we were only meant to shoot short bursts. But how do you just shoot short bursts with an auto fire rock and roll Lanchester. It's very difficult when you're all just 20 years old and the ammo is free. No shortage of most spares as I recall and there were still 6 or so in the workshop armoury when we pulled out. Left behind from an ex UKicon submarine that was given to Australiaicon (HMS Aurochs?)

  11. The Following 3 Members Say Thank You to Peter Laidler For This Useful Post:


  12. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    ProLibertate's Avatar
    Join Date
    Aug 2017
    Last On
    08-10-2018 @ 09:06 PM
    Location
    Santa Cruz Mountains
    Posts
    7
    Local Date
    03-28-2024
    Local Time
    01:43 PM
    Thread Starter
    Thank you everyone! I'll be following in Archilochus' footsteps and omit the flat.

    From what I can see of the mechanism, the length of the barrel isn't a really critical dimension. It looks like it could tolerate even as much as +-0.125" Yes? (aside from legality of course). I can see a faint wear mark where the original barrel rested and I'm going to make mine reach to roughly the same mark.

  13. #9
    Legacy Member Archilochus's Avatar
    Join Date
    Sep 2017
    Last On
    02-01-2023 @ 01:52 PM
    Location
    South New England
    Posts
    15
    Local Date
    03-28-2024
    Local Time
    04:43 PM
    Quote Originally Posted by ProLibertate View Post
    Thank you everyone! I'll be following in Archilochus' footsteps and omit the flat.

    From what I can see of the mechanism, the length of the barrel isn't a really critical dimension. It looks like it could tolerate even as much as +-0.125" Yes?
    Since it shares magazines with the STEN, I located my barrel similar to the STEN, with the breech end of the barrel about 0.040" forward of the inside front face of the magazine opening. I've seen STEN Mk3 kits where this measurement was zero, up to almost 1/8", so I went somewhere in the middle.
    Once the rear end of the barrel was located, I just made the front end (not including the extension) flush with the front of the tube.
    Last edited by Archilochus; 05-29-2018 at 03:37 PM.

  14. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:43 PM
    Quote Originally Posted by Peter Laidlericon View Post
    The flat is at the bottom on the Sterling BAR.
    Yes...but this barrel for the Lanchester I mean. The mag is on the left and so is the feedway, I wondered if the flat shouldn't be on the right...
    Regards, Jim

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Lanchester Mk1 SMG
    By Brit plumber in forum Other LMG/HMG and SMG Forum
    Replies: 125
    Last Post: 09-24-2020, 04:54 PM
  2. Lanchester MK1 ejector question.
    By Archilochus in forum Other LMG/HMG and SMG Forum
    Replies: 2
    Last Post: 11-11-2017, 06:51 PM
  3. Lanchester SMG HELP Please
    By David H in forum Other LMG/HMG and SMG Forum
    Replies: 19
    Last Post: 04-30-2017, 05:54 AM
  4. Lanchester
    By Peter Laidler in forum Other LMG/HMG and SMG Forum
    Replies: 23
    Last Post: 05-14-2016, 07:38 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks