+ Reply to Thread
Results 1 to 8 of 8

Thread: M16A1 Handguards

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    Yesterday @ 08:08 PM
    Location
    San Deigo, CA
    Posts
    1,733
    Real Name
    Bill Baker
    Local Date
    03-29-2024
    Local Time
    08:18 AM

    M16A1 Handguards

    I pick up two sets of M16A1 (Vietnam Era) furniture to play around with, I don't own an AR of any type. I figured that it would be a fun project to restore them. One set really just needs a good cleaning and finish. The other set needs some work.

    I have an idea on how I can reconstruct broken off handguard vent tangs but am wondering how these are normally reconstructed, if at all.

    *** YES I KNOW ITS A WASTE OF TIME, but so is watching TV and reruns of Archie Bunker and the Waltons. But this is the kind of crap I like to do, its fun, way more fun than 1. stamp collecting, 2. booger collections and 3. watching Mellinals trying to find a safe space, well maybe not funner then #3. SO ya' don't need to tell me I can buy a clean set for less than it costs to fix them, that's not the point.... especially since I don't have an AR or M16icon.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by usabaker; 06-28-2018 at 01:36 AM. Reason: Forgot to add pictures
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  2. Thank You to usabaker For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member HOOKED ON HISTORY's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 10:36 AM
    Location
    MS/USA
    Posts
    3,991
    Local Date
    03-29-2024
    Local Time
    10:18 AM
    A man after my own heart.
    I just came in from 95 deg. F 100% humidity heat building a set of light brackets for a truck that I could have bought for $40.
    Sometimes you just need a challenge.
    I have contemplated your mission although never tried it. Perhaps build a supporting form with cardboard or something like it to the rough shape of the "tooth". Coat it with some type of release agent and build up with bedding compound or HB weld? File /dremmel to final shape?
    That's as far as I got with my brainstorming.
    P.S.
    I should have bought the brackets.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    Yesterday @ 08:08 PM
    Location
    San Deigo, CA
    Posts
    1,733
    Real Name
    Bill Baker
    Local Date
    03-29-2024
    Local Time
    08:18 AM
    Thread Starter
    Quote Originally Posted by HOOKED ON HISTORY View Post
    Perhaps build a supporting form with cardboard or something like it to the rough shape of the "tooth". Coat it with some type of release agent and build up with bedding compound or HB weld? File /dremmel to final shape?
    Mississippi, I remember those days even sort of miss them. I was stationed in Gulfport in 1977 ~ 1979 almost moved back, might of too except for a crazy woman that kept stalking me. Anyhow, Didn't think of Acraglas bedding, did think if the JB Weld. I have some silicone molding material I was thinking about making a mold off the good set and then set the mold in place in the set that needs restoration and use fiberglass, JB weld, or now Acraglas; not sure which will adhere better to the A1 plastic.

    Quote Originally Posted by HOOKED ON HISTORY View Post
    I just came in from 95 deg. F 100% humidity heat building a set of light brackets for a truck that I could have bought for $40
    Why buy when you can make, there is something about making and fixing that overrides fast, easy and cost. So how did the brackets come out since you say ya should have bought them?
    Last edited by usabaker; 06-28-2018 at 01:37 AM.
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  7. #4
    Legacy Member ArizonaBeagle's Avatar
    Join Date
    Apr 2010
    Last On
    04-06-2023 @ 10:33 PM
    Location
    Paradise Valley Arizona
    Posts
    140
    Local Date
    03-29-2024
    Local Time
    08:18 AM

    Thumbs up M16A1 Handguards.......

    I also have a couple of hand guard sets that need a tooth or two replaced.
    I was planning on using fiberglass cloth somewhat oversize and file/dremel to fit.
    Just haven't gotten around to it yet.
    I'll be curious to see what you end up doing with yours.

    AZB

  8. #5
    Legacy Member HOOKED ON HISTORY's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 10:36 AM
    Location
    MS/USA
    Posts
    3,991
    Local Date
    03-29-2024
    Local Time
    10:18 AM
    Quote Originally Posted by usabaker View Post
    Why buy when you can make, there is something about making and fixing that overrides fast, easy and cost. So how did the brackets come out since you say ya should have bought them?
    Feeling better about the fabrication project now that I have cooled off. I really enjoy making / repairing things.
    Keep us posted on what works as I have a couple of sets that could use some orthodontic repairs.
    P.S.
    Building a retro AR is great fun as well.

  9. #6
    Legacy Member M94/14's Avatar
    Join Date
    Mar 2009
    Last On
    03-27-2024 @ 04:50 AM
    Posts
    144
    Local Date
    03-29-2024
    Local Time
    09:18 AM
    Here's what I did to fix one years ago...

    I used 2.5 oz. Carbon Fiber cloth, although carbon matting will work as well, if you can find it. Make a form that fits the inside curvature of the tooth area (use the existing good teeth for the proper contour) and clamp it or attach it somehow to some of these good "teeth". Put wax paper on the form before you attach it though. Clean the area with acetone, then mix up some accraglas, or any good epoxy resin and start laying down several swatches of carbon cloth, or matting to build up the broken teeth. Be liberal with the cloth and build it up in excess of the thickness of the existing teeth. When cured, you can shape the sides with a dremel and a sanding wheel, then use a block and paper to blend the thickness and square the edge. When done, Mix up some more resin, and apply a swatch or two of cloth on the inside of the handguard overlapping the joint area of the teeth you just fixed. Contour again and you're done.

    If you can find the carbon matting, it's a bit better in that when blended and shaped, there's no "weave" to cover up.

    Hope this helps...

  10. #7
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    03-29-2024
    Local Time
    11:18 AM
    Masking tape and epoxy bedding material would do it. Kind of suspect it wouldn't last though. It's kind of brittle.
    What'd probably work best is a fiberglass resin boat repair kit. $14.97 US for a Bondo brand kit in Home Depot. One cent cheaper in Wally World.
    "...don't own an AR..." Me either but I have a brand new, unfinished forestock for a C7 rifle. Did some work in the factory that made 'em, 19 years ago, in Kitchener, Ont. and acquired a souvenir.
    Spelling and Grammar count!

  11. #8
    Moderator
    (Lee Enfield Forum)


    tbonesmith's Avatar
    Join Date
    Sep 2007
    Last On
    03-05-2024 @ 02:45 AM
    Location
    Sydney, Australia
    Posts
    1,076
    Real Name
    Thomas Smith
    Local Date
    03-30-2024
    Local Time
    02:18 AM
    If you go the fibreglass route, use epoxy resin and a woven cloth and not polyester and chopstrand mat. The epoxy sticks to anything and you can almost be guaranteed of a very good bond. Polyester resins are hit and miss bond wise when going over materials other than polyester. If those guards were mine, I do as previously suggested and make a mold to give the approximate curve to the repair area and layup the glass repair from the inside of the guard. Let it cure, shape it, fill it with filler or more glass as required, make good.
    If you add some black pigment to the resin it may make the colour match of the repair very close off the bat.

+ Reply to Thread

Similar Threads

  1. M16A1 or M16A2?
    By no1halo in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 14
    Last Post: 11-12-2017, 09:38 PM
  2. M16A1 contract info
    By mrclark303 in forum M16A2/AR15A2 Rifles
    Replies: 12
    Last Post: 08-12-2017, 05:05 AM
  3. Building a M16a1 rifle
    By waltsfastz in forum M16A2/AR15A2 Rifles
    Replies: 23
    Last Post: 08-22-2016, 11:16 PM
  4. Colt bayo for M16A1
    By Bizio in forum Edged Weapons Forum
    Replies: 5
    Last Post: 03-04-2013, 01:49 PM
  5. M16A1 and A2/3
    By P. Greaney in forum M16A2/AR15A2 Rifles
    Replies: 3
    Last Post: 03-03-2009, 04:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks