+ Reply to Thread
Results 1 to 9 of 9

Thread: 7.55 Swiss vs K31 Die sets?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Senior Member amadeus76's Avatar
    Join Date
    Dec 2016
    Last On
    Yesterday @ 10:21 PM
    Location
    Harker Heights, tx
    Posts
    194
    Local Date
    07-16-2018
    Local Time
    11:11 PM

    7.55 Swiss vs K31 Die sets?

    So I have both a Swissicon 1911 long rifle and a K31. Obviously both of these are chambered for 7.55 Swiss. And as I do for all my other calibers I would prefer to reload for them. I've done some initial looking around and have noticed that there are dies listed specifically for both, often by the same maker. So my question is, is there a real reason for this or is it a marketing thing? Can I get away with only buying one and if so, is one (K31 vs 7.55 Swiss) preferable?

    Thanks.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles Service Publications - Collectors books that earn their place in your library! Your source for the finest in High Power Competition Gear. Canadian Import and Export Services (Click banner ad for more information) Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Really Senior Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 02:03 PM
    Location
    London, Ontario
    Posts
    492
    Local Date
    07-17-2018
    Local Time
    12:11 AM
    Everything you ever wanted to know about the rifles and their ammo is here. There are very few sites that are as comprehensive as Swissicon Rifles. Reloading for 'em, including good pictures of the assorted 7.5 Swiss cartridges, is under Ammunition. They say(FAQ's) it's safe to fire modern 7.5x55 rounds in 1896/11s, 1911s and K31s. You'd have to work up a load for both rifles though.
    SwissRifles
    Spelling and Grammar count!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member Ovidio's Avatar
    Join Date
    Dec 2016
    Last On
    Yesterday @ 08:01 PM
    Location
    Pordenone, Italy
    Posts
    567
    Local Date
    07-17-2018
    Local Time
    06:11 AM
    Real Name
    Ovidio Gentiloni
    I reload with the Lee dies for 7,5x55 Swissicon, FL set for collet only. For my K31.
    No issues at all.
    34a cp., btg. Susa, 3° rgt. Alpini

  6. #4
    Advisory Panel Parashooter's Avatar
    Join Date
    Dec 2008
    Last On
    Yesterday @ 11:27 AM
    Location
    Connecticut
    Age
    73
    Posts
    560
    Local Date
    07-17-2018
    Local Time
    12:11 AM
    K31icon and 1911 chambers differ in body taper (and throat length). Dies made specifically for K31 will not FL size cases to fit smaller 1911 chamber. Standard (1911) dies work for both.


  7. The Following 2 Members Say Thank You to Parashooter For This Useful Post:


  8. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    Yesterday @ 04:51 PM
    Location
    Germany
    Posts
    4,514
    Local Date
    07-17-2018
    Local Time
    06:11 AM
    Parashooter's post illustrates a basic rule for all milsurps: even if the rifles have the same nominal caliber, use only neck-sizing dies AND keep the cases separate for each rifle.
    I find that a simple and reliable way to do this is to use cases from different manufacturers for different rifles.

    This prevents the annoyance of getting to the range with the rifle that has the tighter chamber, and finding you have brought the ammo for the rifle with the looser chamber!

    You can, of course, always full-size for the minimum chamber, but case life will be short.
    Last edited by Patrick Chadwick; 07-04-2018 at 10:24 AM.

  9. #6
    Senior Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    07-04-2018 @ 08:42 PM
    Location
    north texas
    Posts
    162
    Local Date
    07-16-2018
    Local Time
    11:11 PM
    [QUOTE=Patrick Chadwick;433851]Parashooter's post illustrates a basic rule for all milsurps: [I]even if the rifles have the same nominal caliber, use only neck

    What do you do if you have 300 to 500 rifles in the same caliber ?

  10. #7
    Advisory Panel Parashooter's Avatar
    Join Date
    Dec 2008
    Last On
    Yesterday @ 11:27 AM
    Location
    Connecticut
    Age
    73
    Posts
    560
    Local Date
    07-17-2018
    Local Time
    12:11 AM
    Unfortunately, neck sizing doesn't work very well for these straight-pulls unless significantly reduced loads are used. At full pressure, cases are often expanded enough that they cannot be easily chambered and extracted via a mechanizm where the bolt's turning force is applied indirectly through a cam arrangement that converts axial to radial motion. This is very different from the usual turnbolt action where all we have to do with a tight case is crank a bit more forcefully on the big handle.

    7.5x55 cases that have been fired will full loads should be FL sized to avoid disappointment at the range. At the very least, sized cases should should checked in the rifle for easy chambering and extraction - before charging. Those wishing to enhance case life can learn to adjust FL sizers to produce minimal cartridge end-play while maintaining an easy fit.

  11. Thank You to Parashooter For This Useful Post:


  12. #8
    Contributing Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 05:53 PM
    Location
    Sault Ste. Marie, ON
    Posts
    917
    Local Date
    07-17-2018
    Local Time
    12:11 AM
    My buddy used to reload for the K31icon. It was a absolute nightmare for him. Everything needed to be tight tolerances to get it to function reliably. Everytime he reloaded he had to trim the cases.

    In comparison my for my I.G. 1889 I have never trimmed the cases (though I am going to have to now as I found I couldn't chamber rounds that would fit in the 1889 in my K1893). I could also get away with much more slop in the reloading, whereas he had to spend a lot of time making sure it was all 100% on point.

  13. #9
    Contributing Member Ovidio's Avatar
    Join Date
    Dec 2016
    Last On
    Yesterday @ 08:01 PM
    Location
    Pordenone, Italy
    Posts
    567
    Local Date
    07-17-2018
    Local Time
    06:11 AM
    Real Name
    Ovidio Gentiloni
    I'm not having all those trouble with my K31icon. I only neck-size, so they are a bit tight when chambering, but really just a tad. I sometimes have to push the handle harder or rap it with the palm just a bit.
    My current brass has gone through 4 reloads and I have not trimmed it yet, although it is on my to-do list after tomorrows "session".

    34a cp., btg. Susa, 3° rgt. Alpini

+ Reply to Thread

Similar Threads

  1. Swiss Military and Swiss Reproduction Bags
    By Mil-Spec in forum Swiss Rifles
    Replies: 6
    Last Post: 04-04-2016, 04:49 PM
  2. Swiss Military and Swiss Reproduction Bags
    By Mil-Spec in forum Milsurps General Discussion Forum
    Replies: 2
    Last Post: 03-22-2016, 11:22 AM
  3. Web Gear Sets
    By Harlan (Deceased) in forum Vintage Military Gear
    Replies: 8
    Last Post: 11-27-2011, 12:28 AM
  4. AIM Surplus has No. 4 MK I stock sets
    By kscchtrainer in forum The Restorer's Corner
    Replies: 11
    Last Post: 08-23-2008, 11:10 PM
  5. AIM Surplus has No. 4 MK I stock sets
    By kscchtrainer in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 08-23-2008, 11:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts