+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: Question regarding certain careers and the term "Gunsmith"

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member kilopi505's Avatar
    Join Date
    Jun 2018
    Last On
    08-03-2020 @ 08:43 AM
    Location
    Bulacan, Philippines
    Posts
    12
    Local Date
    03-28-2024
    Local Time
    03:46 PM

    Question regarding certain careers and the term "Gunsmith"

    I apologize if my question is not about working on a gun, but only about the definition of "Gunsmith". I'm only asking here because this is the only part of the website that for sure has gunsmiths around.

    My question is in regards to the Machine Operators of Gun Factories...and workmen? Rifle Factory Ishapore used the term workmen. Are workmen and Machine Operator the same thing? Hmm...


    Anyways, my question is in regards to those. Do they automatically fall under the definition of the word "Gunsmith"? They are the ones who create the guns in the factories, right?

    Are they even considered gunsmiths by those who are officially gunsmiths?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by kilopi505; 07-01-2018 at 11:12 AM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member nijalninja's Avatar
    Join Date
    Nov 2017
    Last On
    10-09-2020 @ 07:24 PM
    Location
    Australia
    Age
    25
    Posts
    361
    Local Date
    03-28-2024
    Local Time
    05:46 PM
    The term gunsmith nowadays means more the ones that repair and service firearms, but it changes from country to country. Back in the day a gunsmith would have been someone that probably invented and created firearms. In todays world the people that make firearms in factories are what we call in Australiaicon fitters and turners (Most gunsmiths are this as well).

    So yeah its a bit of a grey and funny coloured area at least from my perspective.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member kilopi505's Avatar
    Join Date
    Jun 2018
    Last On
    08-03-2020 @ 08:43 AM
    Location
    Bulacan, Philippines
    Posts
    12
    Local Date
    03-28-2024
    Local Time
    03:46 PM
    Thread Starter
    Quote Originally Posted by nijalninja View Post
    The term gunsmith nowadays means more the ones that repair and service firearms, but it changes from country to country. Back in the day a gunsmith would have been someone that probably invented and created firearms. In todays world the people that make firearms in factories are what we call in Australiaicon fitters and turners (Most gunsmiths are this as well).

    So yeah its a bit of a grey and funny coloured area at least from my perspective.
    So if a gun factory machine operator/fitter and turner says they are a gunsmith, even though they don't have a certification of graduation from some gunsmithing course, it is valid enough that those who graduated from said kinds of courses or apprenticed to a gunsmith can't dispute the claim by the machine operator/fitter and turner?

  6. #4
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 01:40 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-28-2024
    Local Time
    09:46 AM
    Smith is the original word for working with metal, making all things metal from tools, to blades for kitchen and war, to horseshoes, etc. And repairing them. Nowadays a blacksmith. As a blacksmith couldn't do everything equally well and focused on larger stuff not as finely finished, others specialised from there.

    A gun smith is thus a person who makes guns and repairs them, thus a gunsmith. Lock, stock, barrel were the components and mainly still are. If you look at the lock on an early muzzle loader and compare it to a craftsman's lock you will see the specialisation that took place.

    Anyone not qualified or able to build a gun from the bare essentials is actually not a gunsmith. Let's exclude making the barrel and receiver from this although they should be able to do this. A machine operator/fitter and turner may become a gunsmith either by experience or further training, or possibly from self learning.

    With this in mind, I would broadly describe a machine operator someone who turns out a large number of identical items, a workman similar or combining items into a finished product. Example, the machine operator/workman in a car manufacturing plant isn't a mechanic except if qualified separately.

  7. #5
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 08:56 PM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-28-2024
    Local Time
    03:46 AM
    Here in Canadaicon Gunsmithing is a unlicenced trade. Literally anyone can call themselves a gunsmith. Personally I have done some small level gunsmithing type tasks though various repairs and builds. That being said very few if any actually build a firearm from scratch anymore. Even people like the Weapons Technicians in the Canadian military are just basically parts changers (the AR-15 I built recently I did more on the build than our military trains our military gunsmiths to do).

  8. #6
    Legacy Member nijalninja's Avatar
    Join Date
    Nov 2017
    Last On
    10-09-2020 @ 07:24 PM
    Location
    Australia
    Age
    25
    Posts
    361
    Local Date
    03-28-2024
    Local Time
    05:46 PM
    Quote Originally Posted by kilopi505 View Post
    So if a gun factory machine operator/fitter and turner says they are a gunsmith, even though they don't have a certification of graduation from some gunsmithing course, it is valid enough that those who graduated from said kinds of courses or apprenticed to a gunsmith can't dispute the claim by the machine operator/fitter and turner?

    Thats a tough one. Typically in a legal sense the one with the qualifications is the one with the most authority regardless of their actual capabilities. That is in my country however. You can't tell anyone about anything without having some kind of permit/licence/or certificate. However, if the dispute was about mass manufacturing in a way that the fitter was well versed in and had years experience over the gunsmith then things may change, but if it were a dispute of old parts, old guns, and generally forgotten skills and tools the gunsmith SHOULD have the more authority.

  9. #7
    Legacy Member kilopi505's Avatar
    Join Date
    Jun 2018
    Last On
    08-03-2020 @ 08:43 AM
    Location
    Bulacan, Philippines
    Posts
    12
    Local Date
    03-28-2024
    Local Time
    03:46 PM
    Thread Starter
    I see.

    Thank you everyone for your answers!

    This greatly helped me!

  10. #8
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    09:46 AM
    In Australiaicon we used to call our national service cooks - who all wanted to be called 'chefs' - fitters and turners because they used to fit the food into pots and turn it into 5hit.

  11. #9
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-28-2024
    Local Time
    07:46 AM
    As Dean points out in post #4, Smith relates back to the blacksmith , Gunsmith etc. A time when damascus barrels were the norm........... A Machine operator is just that, he or she operates that machine to produce a component or a certain machiing of that component, workman can relate to anything on the shop floor but would probably be a labourer.

    I served an Apprenticeship as a Fitter & Turner not the Chef type as Peter points out, although nothing new on that front in any new modern day Chef, in my current work place the Chefs would be lost without a deep fat fryer, a pair of scissors and a steam oven.......... most things are boiled in the bag or fried, the scissors are just handy for opening the packets.

    Anyway back to the Fitter & Turner in me, my trade at the time was you could be given a drawing and told go and make it, as simple as that, a lot different to a operator or Workman.

    Todays Gunsmiths are few and far between, the only ones really who can call themselves Gunsmiths in the UKicon are the Gumakers we still have who employ Gunsmiths or have had Apprentices through who have served there apprenticeship, even then there will be two sides to the Gunsmith trade as in metal work or wood work........

  12. #10
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    03-28-2024
    Local Time
    03:46 AM
    "...Here in Canadaicon Gunsmithing is a unlicenced trade..." Not exactly but there is no specific training level required to call yourself a gunsmith. A smithy is required to have a Firearms Business licence according to the Firearms Act. Mind you, so is any business doing anything involving firearms. Makes running a firearm related business a bigger pain in the posterior.
    "...workmen and Machine Operator the same thing..." Only if the workman actually runs a machine. Neither of 'em are gunsmiths though.
    "...Smith relates back to the blacksmith..." The term has nothing to do with Blacksmith's specifically. Paul Revere was a silversmith. There were goldsmiths, sword smiths, arrow smiths, etc., etc.
    Spelling and Grammar count!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Special thanks to two helpful members on Milsurps - "stencollector" & "smle addict"
    By Seaforth72 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 11-16-2017, 03:00 PM
  2. Warner Brothers "Break Downs" and "Blow Ups" 1936-1947
    By Badger in forum Old Time Movie Classics
    Replies: 0
    Last Post: 03-02-2013, 07:54 AM
  3. SAVAGE "S" in details, "ILCO butt trap", "P" on bayonet stud,what co. was ILCO?
    By Garandrew in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 11-15-2010, 07:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks