+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 28

Thread: Feeding the Krag

Click here to increase the font size Click here to reduce the font size
  1. #11
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    03-27-2024 @ 11:56 AM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-29-2024
    Local Time
    06:14 AM
    Very interesting stuff. Thanks for taking the pictures.
    You make a good point that .05” would be quite a difference though, to this point, I’ve used 180 grain off the shelf loads exclusively - Winchester or Remington.
    I can’t say I’ve had this problem.
    Let me send you that spring. Not sure it’ll help but it’s not doing anything sitting here (haven’t managed to sell it haha). I’d like to satisfy my curiousity anyway.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Boomer:
    In your 2nd picture, the cartridge case is more forward than in the 1st picture.

    I have never had feeding problems with Remington 180 grain (S.P. bullet) factory loads in my Krags.

    I use 168 grain Sierra "Match King" (boat-tailed spitzer) bullets, seated for a 3.080" to 3.087" over-all cartridge length. Cartridge cases are just 'neck-sized' and feed without issues.

    You might try another magazine side-plate. A spare 1898 plate sells for about $20; (I am assuming you have a model 1898).

    The lobe on the inside of the side-plate makes contact with the case neck, shoulder, and tapered body. It plays a role in guiding the cartridge as it moves forward toward the chamber.

    Make sure your side-plate is fully seated against the receiver wall and the side-plate screw is snug. A loose side-plate can cause feed problems.

    Actually, your cartridges look nicely lined up to enter the chamber. I have had some 'failures to feed' with 147 grain GI spitzers. Sometimes, the bullet tip catches on the breech face of the barrel, instead of entering the chamber.

    The bullet tip does play a role in feeding the cartridge into the Kragicon's chamber. The bullet tip makes contact with the inside front-curve of the side-plate and the 'ramp' machined into the inside left-front of the action. These surfaces were designed around the 220 grain RN projectile, but, other projectiles can work satisfactory.

    (Note - The Model 1898 side-plate is thicker at the front tendon, (the tongue that inserts into niche machined into action), and does not fit on a model 1896 action. A model 1896 side-plate sometimes finds its way onto a model 1898 action, but, likely won't function properly).
    Last edited by butlersrangers; 07-10-2018 at 04:21 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    03-27-2024 @ 11:56 AM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-29-2024
    Local Time
    06:14 AM
    Quote Originally Posted by butlersrangers View Post
    You might try another magazine side-plate. A spare 1898 plate sells for about $20; (I am assuming you have a model 1898).
    I have one of those you can try too. Some deep scratches on the outside but it would at least show ya something.

  6. #14
    Legacy Member boomer656's Avatar
    Join Date
    Mar 2018
    Last On
    03-18-2024 @ 07:45 AM
    Location
    Pennsylvania, US
    Age
    70
    Posts
    121
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Thread Starter
    Quote Originally Posted by rcathey View Post
    ...... Let me send you that spring. Not sure it’ll help but it’s not doing anything sitting here (haven’t managed to sell it haha). I’d like to satisfy my curiousity anyway.
    I think I'll take you up on your offer for the spring. This is the only Kragicon I've operated, but it doesn't seem right that the cartridge (when there is only one) tips down away from the barrel and more 'square' into the ramp.

  7. #15
    Legacy Member boomer656's Avatar
    Join Date
    Mar 2018
    Last On
    03-18-2024 @ 07:45 AM
    Location
    Pennsylvania, US
    Age
    70
    Posts
    121
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Thread Starter
    Quote Originally Posted by butlersrangers View Post
    Boomer:
    .... You might try another magazine side-plate. A spare 1898 plate sells for about $20; (I am assuming you have a model 1898).

    The lobe on the inside of the side-plate makes contact with the case neck, shoulder, and tapered body. It plays a role in guiding the cartridge as it moves forward toward the chamber.

    Make sure your side-plate is fully seated against the receiver wall and the side-plate screw is snug. A loose side-plate can cause feed problems.

    Actually, your cartridges look nicely lined up to enter the chamber. I have had some 'failures to feed' with 147 grain GI spitzers. Sometimes, the bullet tip catches on the breech face of the barrel, instead of entering the chamber.

    The bullet tip does play a role in feeding the cartridge into the Kragicon's chamber. The bullet tip makes contact with the inside front-curve of the side-plate and the 'ramp' machined into the inside left-front of the action. These surfaces were designed around the 220 grain RN projectile, but, other projectiles can work satisfactory.

    (Note - The Model 1898 side-plate is thicker at the front tendon, (the tongue that inserts into niche machined into action), and does not fit on a model 1896 action. A model 1896 side-plate sometimes finds its way onto a model 1898 action, but, likely won't function properly).
    All good info .. Thanks. I'll take a closer look at the side-plate. rcathey is sending me another spring to try.

    When there is only one cartridge left in the magazine, the bullet doesn't seem to guide properly - and tips down, making a more square approach to the ramp in the side plate. If you look at the left side of the 3rd picture, you can see the cartridge angling down and away. I don't have anything to compare this to, but it doesn't seem 'right'.

  8. #16
    Legacy Member boomer656's Avatar
    Join Date
    Mar 2018
    Last On
    03-18-2024 @ 07:45 AM
    Location
    Pennsylvania, US
    Age
    70
    Posts
    121
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    No, you'll have to load it yourself...or find some older factory for control ammo... I was lucky enough to have a box of several hundred factory ball come to me at a point...so...that's how I had the chance to figure that one out. It's cartridge length and the profile of the bullet steers the cartridge out.
    I did find two smaller businesses here in the US that sell their own 220 grain loads - Black Dog Ammunition and Ventura Munitions. If I was going to use this for something other than a 'fun gun', and gave up on trying to fix the feed problem, I'd probably give one of those a try.

  9. Thank You to boomer656 For This Useful Post:


  10. #17
    Legacy Member boomer656's Avatar
    Join Date
    Mar 2018
    Last On
    03-18-2024 @ 07:45 AM
    Location
    Pennsylvania, US
    Age
    70
    Posts
    121
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Thread Starter
    Magazine spring and side plate are on their way -- Thank you rcathey very much for that.

    Since there was some question about whether or not the side plate on my Kragicon (98) was possibly from a 96, I figured I'd post some pictures. Unless the only difference between a 96 and a 98 are internal contours, I'm guessing at this point I have a 98 -- it fits like a snug glove. But I have nothing to compare it too, so it could be the problem.

    As long as I had it apart I figured I'd post some pictures. If you see something you want a closer look at, let me know.
    Last edited by boomer656; 07-11-2018 at 03:35 PM.

  11. #18
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Your side-plate appears correct for a model 1898 Kragicon, below (around) serial number 195,000, when the shape of the bevel on the upper rear corner (B) was changed.

    The inside of your plate looks like it had a 'high polish'. This eventually was discontinued (around 145K, per Joe Poyer).

    The front lip on your side-plate (A) should measure around .150" to .155" thick for an 1898 plate. If it measures .130", it is a model 1896 plate.

    Maybe it's just me or an illusion, but, something doesn't look quite right about your follower/carrier-arm.

    Attachment 94529
    Last edited by butlersrangers; 07-11-2018 at 04:26 PM.

  12. The Following 2 Members Say Thank You to butlersrangers For This Useful Post:


  13. #19
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    1st photo showing model 1899 Kragicon (follower/carrier-arm) cam and spring engagement. 2nd photo shows tip of carrier-arm, that plays an important role in lifting and feeding the last cartridge in the magazine.

    Attachment 94530
    Attachment 94531
    Last edited by butlersrangers; 07-11-2018 at 05:26 PM.

  14. #20
    Legacy Member boomer656's Avatar
    Join Date
    Mar 2018
    Last On
    03-18-2024 @ 07:45 AM
    Location
    Pennsylvania, US
    Age
    70
    Posts
    121
    Local Date
    03-29-2024
    Local Time
    07:14 AM
    Thread Starter
    I came across a thread on another forum (https://www.calguns.net/calgunforum/.../t-929995.html) from several years ago that describes the same problem I'm having. They also concluded the spring was likely the problem. Unfortunately there is no confirmation in that thread that replacing the spring solved the problem.

+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. M38 feeding issues
    By mac1911 in forum Italian Rifles
    Replies: 7
    Last Post: 07-14-2018, 01:22 PM
  2. No 4 Feeding issues.
    By Morning Wood in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 11-18-2013, 09:21 PM
  3. feeding singleshot
    By CouldBeWorse in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 6
    Last Post: 11-07-2012, 10:02 AM
  4. Feeding problem.
    By albert in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 05-30-2010, 07:09 AM
  5. P14 Feeding Issues
    By fatti in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 11
    Last Post: 08-11-2009, 12:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks