+ Reply to Thread
Results 1 to 5 of 5

Thread: Holy Grail Enfield

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member big_gles's Avatar
    Join Date
    Aug 2018
    Last On
    11-17-2018 @ 07:46 PM
    Location
    Seattle, WA, USA
    Posts
    3
    Local Date
    12-13-2018
    Local Time
    07:24 AM

    Holy Grail Enfield

    My Holy Grail is to resurrect one of my 4 enfields (my 1916 Enfield Mk III*) from 'sporterized' back to as original as I can manage, to honor my two grandfathers who (might have) carried this model when they were in Franceicon in WW1, and for my great uncle who (might have) carried one in the Dardanelles in WW1. My great uncle was killed, the others survived, one wounded. In all, I own a 1922 Lithgowicon (complete, all matching), a 1927 Ishapore (complete, with Aussie wood), the 1916 Enfield sporter described above and a 1918 NRF barreled action which I'm collecting parts for (all 4 rifles are in .303 calibre). The Ishapore, and NRF are No 1 Mk III's, the Enfield and Lithgow are No 1 MK III*'s. I still need an original lower forend stock in decent shape for the 1918 NRF No 1 Mk III if anyone cares to part with one! I'm in the US but still a Brit, and when I eventually pass on, the Britishicon ones will go to my son

  2. Thank You to big_gles For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Armory.Auctions LLC. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:22 AM
    Location
    Victoria BC
    Posts
    20,834
    Local Date
    12-13-2018
    Local Time
    07:24 AM
    Why not place a WTB in the forum here for more exposure for parts you need?
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Really Senior Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 03:09 PM
    Location
    London, Ontario
    Posts
    620
    Local Date
    12-13-2018
    Local Time
    10:24 AM
    Restoring any milsurp is a horrendously expensive proposition. Moreso with a No. 1 Lee-Enfield because a lot of 'em were assembled out of parts bins with no QC, so the headspace is usually bad. So check the headspace before you do anything else(measure the barrel length before doing that. Should be 24". Lot of 'em have been cut.) Fixing headspace issues is easy, but with a No. 1 you need a handful of bolt heads(at $14.90 each from Gunparts) to try with proper headspace gauges until you find one that works.
    There are no more stock sets, but Gunparts lists the stock parts. Mind you, they're out of stock on most of 'em.
    Then you get into the really expensive parts of a restore. That'd be all the wee metal bits and pieces. For example, a used nose cap runs $11.15 each. There are 2 nose cap screws, one of which Gunparts doesn't have(they're not the only game though), that run $3.50 and $3.60 plus a nut that runs $2.70 each. Then there's all the assorted swivels and their screws. Adds up quickly. And if you insist on original parts vs repros, it'll just more. Be worse if you want a specific year. The mag cut off was taken out with the '*' and you'd need a receiver with the cut off on it.
    Do a net search for No. 1 Mk III parts for more places Stateside selling parts.
    Dardanelles was in 1915. No Mk III*'s until January 1916. If that matters.
    Spelling and Grammar count!

  7. Thank You to Sunray For This Useful Post:


  8. #4
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Today @ 07:09 AM
    Location
    Southern Corner Western Australia
    Posts
    5,477
    Local Date
    12-13-2018
    Local Time
    11:24 PM
    Real Name
    CINDERS
    If it was produced with the mag cut off in place whether EFD or Lithgowicon does not matter they are usually $75/Au, piling swivels are usually around the $25 ~ $40/Au full wood sets go for around $300 ~ $450/Au so as SR suggests get it checked first then make your decision it took me 10 years to get my 1916 Lithgow correct (serials - Bolt, Receiver, Ncap match)getting WWI era or correctly stamped pieces in the end with the correct 1916 5MD Lithgow bayonet & Scabbard cost me roughly 8-9 times what the rifle originally cost (a $100 special) I have had the rifle now for @14 years.

  9. #5
    Really Senior Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 09:19 AM
    Location
    USA
    Posts
    2,901
    Local Date
    12-13-2018
    Local Time
    11:24 AM
    I just sent you a message as I have a late WW1 Mark 111 fore-end available

    RCS


+ Reply to Thread

Similar Threads

  1. What’s your Lee Enfield Holy Grail?
    By No4Mk1(T) in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 345
    Last Post: 12-03-2018, 01:19 PM
  2. My Holy Grail of Bayonets - Swiss Bicyclists Bayonet
    By Aragorn243 in forum Edged Weapons Forum
    Replies: 7
    Last Post: 11-22-2017, 08:58 PM
  3. My Enfield holy grail.......
    By David TS in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 9
    Last Post: 04-08-2014, 09:18 AM
  4. I have achieved the “Holy Grail Triumvirate” (Picture Heavy)
    By Alan de Enfield in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 03-10-2014, 07:06 AM
  5. The Holy Grail arrived
    By bigduke6 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 08-18-2013, 08:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts