+ Reply to Thread
Results 1 to 9 of 9

Thread: Scratched Chamber

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member GeeOwn's Avatar
    Join Date
    Jun 2016
    Last On
    11-21-2018 @ 11:25 PM
    Location
    California, USA
    Posts
    15
    Local Date
    12-13-2018
    Local Time
    08:27 AM

    Scratched Chamber

    Hey, all. I purchased a No4 mkI in pretty good condition but I found there's 2 scratches in the chamber... Ive taken it to the range and noticed it was a bit sticky but not overly. I sent it off to a smith to have the chamber polished. When I went to pick it up he said the scratches were still there but they've been smoothed out so the rifle should funtion easier.

    My questions are, other that having a sticky action will these scratches cause any accuracy issues, and can anything be done to fix this aside from spending $300+ on a new barrel?

    I'll try to upload a photo or 2 in a bit.

  2. Thank You to GeeOwn For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Armory.Auctions LLC. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:27 AM
    Location
    Victoria BC
    Posts
    20,834
    Local Date
    12-13-2018
    Local Time
    07:27 AM
    Shouldn't have anything to do with accuracy of that rifle. It's not exactly a match rifle...mostly will be inside your head whether it affects it or not.
    Regards, Jim

  5. Thank You to browningautorifle For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Really Senior Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 03:09 PM
    Location
    London, Ontario
    Posts
    620
    Local Date
    12-13-2018
    Local Time
    10:27 AM
    Enfield barrels can have slightly oversized chambers anyway. Follow Rule Number One. If it works, don't fix it.
    Like browningautorifleicon say, scratches in the chamber have nothing to do with accuracy. Barrel ID does though.
    You need to slug the barrel. Enfield barrel diameters are rarely the nominal .311". They can measure from that to .315" and be considered ok. The issue is that factory ammo and reloading bullets are .311" or .312" with Montana Bullets making cast .314" bullets(for reasonable money), only.
    And check the headspace. Thousands of Lee-Enfields have been assembled out of parts bins with zero QC.
    Spelling and Grammar count!

  8. Thank You to Sunray For This Useful Post:


  9. #4
    Member GeeOwn's Avatar
    Join Date
    Jun 2016
    Last On
    11-21-2018 @ 11:25 PM
    Location
    California, USA
    Posts
    15
    Local Date
    12-13-2018
    Local Time
    08:27 AM
    Thread Starter
    Sunray and browningautorifleicon, thanks for the info. Until now, I've never had to deal with a rifle that had any issues with the chamber. I haven't had a chance to shoot it but I will take it to the range and see what's up before deciding to do anything else to it.

    Here's a photo in case anyone was interested.

    There's another scratch similar to that at the 9 o' clock position a bit further down the chamber, too.
    Attached Thumbnails Click image for larger version

Name:	IMG_20180909_144846.jpg‎
Views:	71
Size:	1.97 MB
ID:	95756  

  10. #5
    Really Senior Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 07:21 AM
    Location
    Brisbane
    Posts
    1,698
    Local Date
    12-13-2018
    Local Time
    10:27 AM
    It gets more exciting.

    From data lifted from original drawing, .303 GROOVE diameter can run out to .319 and still be in "spec".

    Never fear, because it worked fine for the entire Empire / Commonwealth for over a century in various roles.

    The only caveat is that this was with BALL, flat / open-based bullets, not slinky, solid-based boat-tails

  11. #6
    Really Senior Member Paul S.'s Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 08:07 PM
    Location
    Back and forth between Sydney and Southern California
    Posts
    1,420
    Local Date
    12-13-2018
    Local Time
    10:27 AM
    Quote Originally Posted by GeeOwn View Post
    Sunray and browningautorifleicon, thanks for the info. Until now, I've never had to deal with a rifle that had any issues with the chamber. I haven't had a chance to shoot it but I will take it to the range and see what's up before deciding to do anything else to it.

    Here's a photo in case anyone was interested.

    There's another scratch similar to that at the 9 o' clock position a bit further down the chamber, too.
    In my opinion, that scratch and another like it are no big deal - particularly in an ~70 year old service rifle. They shouldn't affect chambering or ballistics.

  12. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:27 AM
    Location
    Victoria BC
    Posts
    20,834
    Local Date
    12-13-2018
    Local Time
    07:27 AM
    Quote Originally Posted by Paul S. View Post
    that scratch and another like it are no big deal
    I agree, I doubt they would have affected anything at all.
    Regards, Jim

  13. #8
    Member GeeOwn's Avatar
    Join Date
    Jun 2016
    Last On
    11-21-2018 @ 11:25 PM
    Location
    California, USA
    Posts
    15
    Local Date
    12-13-2018
    Local Time
    08:27 AM
    Thread Starter
    Okay, this is good. From all the feedback, it sounds like everything should be fine. As long as my range session goes well this weekend, all I'll have to get over are the scratches and scuffs on my reloads.

    Thanks again!

  14. #9
    Really Senior Member Merle's Avatar
    Join Date
    Nov 2007
    Last On
    Yesterday @ 09:11 PM
    Location
    Mercer County, PA, USA
    Age
    70
    Posts
    275
    Local Date
    12-13-2018
    Local Time
    10:27 AM
    Quote Originally Posted by GeeOwn View Post
    Sunray and browningautorifleicon, thanks for the info. Until now, I've never had to deal with a rifle that had any issues with the chamber. I haven't had a chance to shoot it but I will take it to the range and see what's up before deciding to do anything else to it.

    Here's a photo in case anyone was interested.



    There's another scratch similar to that at the 9 o' clock position a bit further down the chamber, too.

    I would not expect that to cause any accuracy issues, and probably not any extraction issues.

+ Reply to Thread

Similar Threads

  1. 7.7x58 will not chamber?
    By mountian girl in forum Japanese Rifles
    Replies: 12
    Last Post: 01-18-2017, 09:59 AM
  2. Scratched on type 99
    By A. F Medic in forum Japanese Rifles
    Replies: 3
    Last Post: 06-30-2014, 11:39 PM
  3. Do I have a chamber problem?
    By viejorifle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 61
    Last Post: 09-12-2013, 10:55 AM
  4. Chamber flags
    By RCS in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 02-24-2011, 12:48 AM
  5. 91/30 Last round won't chamber?
    By aprayinbear in forum Gunsmithing for Old Milsurps
    Replies: 5
    Last Post: 05-18-2010, 01:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts