+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Low Number Debate from the Eye of Ordnance Chief

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Smokeeaterpilot's Avatar
    Join Date
    Apr 2015
    Last On
    12-02-2023 @ 03:12 PM
    Location
    Frederick, MD
    Posts
    44
    Local Date
    04-18-2024
    Local Time
    04:16 PM

    Low Number Debate from the Eye of Ordnance Chief

    Processing files for my online library for next month and these jumped out at me.


    The issue of the low number debate from the Admin Office of the Chief of Ordnance.

    Shows how "dramatic" the Office of Chief of Ordnance can be.
    The first imagine is from a 1931 report. "We need to prevent these rifles from being dangerous to anyone ever again. Not only we are taking them out of service, we're mutilating them in such a fashion where they can never harm anyone ever again."

    The second is from a report in 1944 on steel lots: "well as long as they're properly head spaced, they're safe with standard ammunition."

    Interesting to read through the files and how drastically their attitude changes.

    Please take into account some pretty significant variables....

    1931 - Depression Era, Congressional funding for the Office of Chief of Ordnance (which Springfield and Rock Island fell under).

    1944 - Massive World War raging in Europe and the Pacific.

    Just fun reading these old documents, and the National Archives always have a lot to read!

    Enjoy your week!



    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 3 Members Say Thank You to Smokeeaterpilot For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 05:09 PM
    Location
    USA
    Posts
    4,322
    Real Name
    Robert Seccombe
    Local Date
    04-18-2024
    Local Time
    04:16 PM
    Question, when low numbered 1903 receivers were rebarreled with new barrels from the 1940's, was there a proof load fired ?

    Once in awhile you come across a high number 1903 in the 1,4 serial range with a very early barrel from WW1 or before which might indicate that the original receiver for that
    barrel might have been scrapped

  5. Thank You to RCS For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 04:44 PM
    Location
    Victoria BC
    Posts
    29,903
    Real Name
    Jim
    Local Date
    04-18-2024
    Local Time
    02:16 PM
    Quote Originally Posted by RCS View Post
    Once in awhile you come across a high number 1903 in the 1,4 serial range with a very early barrel from WW1 or before which might indicate that the original receiver for that
    barrel might have been scrapped
    Good point, and these guys then change them out as not correct...

    Quote Originally Posted by Smokeeaterpilot View Post
    Shows how "dramatic" the Office of Chief of Ordnance can be.
    Quote Originally Posted by Smokeeaterpilot View Post
    Interesting to read through the files and how drastically their attitude changes.
    I suspect this is just forgetting history that caused the change in attitude. Not being involved in the original debate will cause various officers to have a vastly different..."In my opinion"... So the rules change.
    Regards, Jim

  8. #4
    Legacy Member cplstevennorton's Avatar
    Join Date
    Mar 2009
    Last On
    03-23-2024 @ 07:06 PM
    Location
    Van Wert, OH
    Age
    44
    Posts
    376
    Local Date
    04-18-2024
    Local Time
    05:16 PM
    I posted these in the CMPicon forum. But actually the Marines came to the same conclusion. They did limit low numbers firing rifle grenades, just as a precaution. But discontinued that as well by the end. They finally determined that low numbers were safe as long as they headspaced and could fire at least 2 proof rounds.

    They even started the additional safety of the Hatcher hole and enlarged gas hole in the bolt in late 1938.


    This is the Marine correspondence at the same time in 1931 as Andrew's above. I love the last line.




    That 100,000 PSI number is consistent throughout the Marine docs when they discuss at what PSI the average low number receiver cracked.

    This is the last statement by the MArines on the low numbers. They started to drill the Hatcher on all rebuilds a year before this. But after this doc, low numbers are never mentioned in the MArine docs again, nor are any failures documented past this that in there that I have seen.

    20 Sept 1939




  9. The Following 6 Members Say Thank You to cplstevennorton For This Useful Post:


  10. #5
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    Yesterday @ 09:06 PM
    Location
    out there
    Posts
    1,822
    Local Date
    04-18-2024
    Local Time
    03:16 PM
    I suspect the change to lighter 150grain m2 ball (lower standard pressure?) also had some bearing on the change in acceptance.??

    I guess i should have read cpl n's document before posting...

  11. #6
    Legacy Member wjw's Avatar
    Join Date
    Nov 2011
    Last On
    Today @ 12:58 AM
    Location
    British Columbia
    Posts
    37
    Real Name
    Bill Warkentin
    Local Date
    04-18-2024
    Local Time
    03:16 PM
    On low number parts on high number receivers, there seems to have been an U.S. Government exchange program for privately owned Springfields that replaced low number with high number receivers until they ran out of high number receivers - if one returned the low number receiver. Recall reading about this in the American Rifleman if memory serves.

  12. #7
    Legacy Member Snowman1510's Avatar
    Join Date
    Dec 2016
    Last On
    06-27-2022 @ 10:29 PM
    Location
    Texas
    Posts
    272
    Local Date
    04-18-2024
    Local Time
    04:16 PM
    Smokeeater, don't you do research for C&Rsenal?


    Edit: I have a low digit receiver with a 1930s rebuild barrel on it. So this either didn't make it all the way around or the guys at rebuild just didn't care.
    Last edited by Snowman1510; 10-11-2018 at 10:50 PM.
    “There are three kinds of men. The ones that learn by readin’. The few who learn by observation.
    The rest of them have to pee on the electric fence for themselves.” - Will Rogers

  13. #8
    Legacy Member Smokeeaterpilot's Avatar
    Join Date
    Apr 2015
    Last On
    12-02-2023 @ 03:12 PM
    Location
    Frederick, MD
    Posts
    44
    Local Date
    04-18-2024
    Local Time
    04:16 PM
    Thread Starter
    Quote Originally Posted by Snowman1510 View Post
    Smokeeater, don't you do research for C&Rsenal?


    Edit: I have a low digit receiver with a 1930s rebuild barrel on it. So this either didn't make it all the way around or the guys at rebuild just didn't care.
    Snowman1510 - Yeah I help those guys out when I can on U.S. stuff. They like primary documentation when available.

    They're so nice and give great shout outs. So I'm happy to assist when they ask or I can. Helping finish up a project now presently for them. I'm anxious to see it come out.


    Also, to everyone else. I found this yesterday. I laughed a bit out loud when I saw it.

    Now please consider the date on the document. The second world war was raging on so risk versus benefit analysis.


    But note it's Hatcher signing it. I dunno why I just thought it was funny considering how everyone chants Hatcher's Notebook about low numbers essentially being Russianicon Roulette with each pull of the trigger. Just caught me as a bit ironic his name popped up on this particular document.

    Enjoy your weekend all!


  14. The Following 2 Members Say Thank You to Smokeeaterpilot For This Useful Post:


  15. #9
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 04:44 PM
    Location
    Victoria BC
    Posts
    29,903
    Real Name
    Jim
    Local Date
    04-18-2024
    Local Time
    02:16 PM
    Yes, dated mid WW2...
    Regards, Jim

  16. #10
    Legacy Member Snowman1510's Avatar
    Join Date
    Dec 2016
    Last On
    06-27-2022 @ 10:29 PM
    Location
    Texas
    Posts
    272
    Local Date
    04-18-2024
    Local Time
    04:16 PM
    This gave me a good giggle actually!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 12-255 Garand Picture of the Day - Commander-in-chief in North Africa
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 6
    Last Post: 09-14-2013, 02:18 PM
  2. Message from the first Commander in Chief
    By Kirk in forum The Watering Hole OT (Off Topic) Forum
    Replies: 1
    Last Post: 12-04-2009, 12:22 AM
  3. Military vs. Commerical Brass Debate
    By Jocko in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 11-09-2009, 04:40 PM
  4. Commander in Chief now afraid of his own Naval officers?
    By Louis of PA in forum The Watering Hole OT (Off Topic) Forum
    Replies: 11
    Last Post: 06-12-2009, 08:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts