+ Reply to Thread
Results 1 to 6 of 6

Thread: Got another Bubba'ed Pattern 1914 Eddystone

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member fjruple's Avatar
    Join Date
    Dec 2006
    Last On
    Yesterday @ 07:11 AM
    Location
    New Jersey, USA
    Posts
    453
    Local Date
    11-15-2018
    Local Time
    04:00 AM

    Got another Bubba'ed Pattern 1914 Eddystone

    Hi folks--
    Well I picked up another Pattern 1914 Eddystone which Bubba got a hold of. The fore stock had been cut down to "sporterize" the rifle for hunting. The barrel was not damaged in his "hack" job. Here's where it gets interesting, Bubba did his job on a like new early 11,000 series fat belly Eddystone. The rifle had not been through the Weedon upgrades and the barrel is pristine!! The best barrel that I have seen so far. There is no rust or pitting on the metal parts at all. The serial number on the bolt, rear sight, receiver and barrel all match. The rifle looks like it had the orignial volley sights but unfortunately Bubba relocated the front swivel through the front volley sight fixture. Additionally Bubba took a grinding wheel to the front sight base to eliminate the front sight base ears. A real hack job. The main problem was finding a good early "fat belly" stock for the rifle. Since I wanted to keep the original rear part of the buttstock which is in excellent condition. I found an early Eddystone fat belly DP stock at a local antique gun show on Saturday. What luck!! The stock cost me the same price as the rifle. $100.00 US! I will have to graft the front end of the DP stock on to the front end of the original stock since I have done this type of work before it should not be a problem. I have no problem getting the metal parts that are missing or damaged by Bubba.

    But I am looking for a front volley sight base for an Eddystone P14 that has not been through the Weedon upgrade process or damaged. I am not looking for the front volley sight arm just yet. If any body can get me some good leads to the front volley sight base it would be deeply appreciated.

    I will post some photos of Bubba's damage.

    Cheers

    --fjruple

    As promised photo's of Bubba's handy work and other aspects of the Eddystone. Note all matching numbers.
    Attached Thumbnails Click image for larger version

Name:	IMG_0007.jpg‎
Views:	50
Size:	35.0 KB
ID:	96893   Click image for larger version

Name:	IMG_0008.jpg‎
Views:	50
Size:	19.2 KB
ID:	96894   Click image for larger version

Name:	IMG_0009.jpg‎
Views:	48
Size:	37.2 KB
ID:	96895   Click image for larger version

Name:	IMG_0010.jpg‎
Views:	48
Size:	21.3 KB
ID:	96896   Click image for larger version

Name:	IMG_0011.jpg‎
Views:	48
Size:	45.7 KB
ID:	96897   Click image for larger version

Name:	IMG_0013.jpg‎
Views:	26
Size:	21.0 KB
ID:	96898   Click image for larger version

Name:	IMG_0016.jpg‎
Views:	27
Size:	51.3 KB
ID:	96899  

    Click image for larger version

Name:	IMG_0015.jpg‎
Views:	28
Size:	82.8 KB
ID:	96900   Click image for larger version

Name:	IMG_0017.jpg‎
Views:	27
Size:	63.9 KB
ID:	96901   Click image for larger version

Name:	IMG_0018.jpg‎
Views:	26
Size:	40.3 KB
ID:	96902   Click image for larger version

Name:	IMG_0019.jpg‎
Views:	29
Size:	31.0 KB
ID:	96903   Click image for larger version

Name:	IMG_0020.jpg‎
Views:	28
Size:	34.5 KB
ID:	96904  
    Last edited by fjruple; 10-31-2018 at 09:46 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Armory.Auctions LLC. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Member AD-4NA's Avatar
    Join Date
    Dec 2014
    Last On
    11-07-2018 @ 06:29 PM
    Location
    USA
    Posts
    78
    Local Date
    11-15-2018
    Local Time
    01:00 AM
    You are extremely lucky bubba did not sand or carve the stock down so you could just graft on a new forward section and could skip all the garbage parts of the DP stocks!

    Not much help, but if no one here can supply your needs I have seen that ebay has uncut Eddystone dial sight plates come up pretty commonly, sometimes with screws, as I am sure you are aware, it is the rest of the assembly that is the problem. Also if your spare parts bin or a want add does not supply any remaining Eddystone specific metal bits you need I have noticed that BRP guns and liberty tree collectors seem to have some choice of parts versus sarco and numrich sending you whatever garbage they have nowadays that occasionally can even be fakes. But if you have a better source than that for handpicked parts I would love to hear it.

    An early rifle like that that missed Weedon would've ended up as one of those really nice matching EY rifles with all the original parts that come up from time to time.
    Was the butt of your stock marked EY or stamped with a maltese cross?
    Last edited by AD-4NA; 10-30-2018 at 10:45 AM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Really Senior Member Salt Flat's Avatar
    Join Date
    Nov 2011
    Last On
    Today @ 01:13 AM
    Location
    USA
    Posts
    535
    Local Date
    11-15-2018
    Local Time
    01:00 AM
    What fantastic luck, both on the uncut barrel and the stock find-- and you are only into it for 200!! I'm jealous! Salt Flat

  6. #4
    Contributing Member mmppres's Avatar
    Join Date
    Mar 2014
    Last On
    Yesterday @ 10:05 PM
    Location
    butler pa
    Age
    53
    Posts
    786
    Local Date
    11-15-2018
    Local Time
    04:00 AM
    Real Name
    mike
    well we need some pictures

  7. #5
    Contributing Member fjruple's Avatar
    Join Date
    Dec 2006
    Last On
    Yesterday @ 07:11 AM
    Location
    New Jersey, USA
    Posts
    453
    Local Date
    11-15-2018
    Local Time
    04:00 AM
    Thread Starter
    Quote Originally Posted by AD-4NA View Post
    You are extremely lucky bubba did not sand or carve the stock down so you could just graft on a new forward section and could skip all the garbage parts of the DP stocks!

    Not much help, but if no one here can supply your needs I have seen that ebay has uncut Eddystone dial sight plates come up pretty commonly, sometimes with screws, as I am sure you are aware, it is the rest of the assembly that is the problem. Also if your spare parts bin or a want add does not supply any remaining Eddystone specific metal bits you need I have noticed that BRP guns and liberty tree collectors seem to have some choice of parts versus sarco and numrich sending you whatever garbage they have nowadays that occasionally can even be fakes. But if you have a better source than that for handpicked parts I would love to hear it.

    An early rifle like that that missed Weedon would've ended up as one of those really nice matching EY rifles with all the original parts that come up from time to time.
    Was the butt of your stock marked EY or stamped with a maltese cross?
    AD-4NA -- The EY is on the stock, the left side of the receiver and the rear of the barrel next to the serial number. I have seen the large maltese cross on other Pattern 14's this one looks like a very small + stamp inside the Britishicon arrow property mark almost cannot see it. I managed to get all of the parts except for the front hand guard and the bits for the front volley sight. It is very tough to find the right parts whcih are still blued from the original production. As soon I get all of the parts in the mail I will start my surgery.

    I will post pictures soon as I had to get a new cell phone as mine retired early. I also saw another 1950/60s conversion today. It was a Colombian .30-06 Mauser that was professionally sporterized. Nice job!! But it would have been nice in its original .30-06 configuration.

    Cheers

    --fjruple

  8. #6
    Member AD-4NA's Avatar
    Join Date
    Dec 2014
    Last On
    11-07-2018 @ 06:29 PM
    Location
    USA
    Posts
    78
    Local Date
    11-15-2018
    Local Time
    01:00 AM
    Fair bit of work there but it will be a nice one when you're finished. That just happens to be the second one I've seen today chopped right at the volley sight inletting with a band put right on top of it. Sorry to say you've just missed a few Eddystone dials just in the past couple months but I'm sure some will pop back up again.



    You might follow up with some pics of the repairs here or in the restororers corner when you get around to finishing it, I at least would love to see them.

+ Reply to Thread

Similar Threads

  1. British Eddystone Pattern 1914 with very early serial number
    By breakeyp in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 3
    Last Post: 03-13-2018, 02:37 PM
  2. How rare is a Pattern 1914 MK I Eddystone ? Short bolt lug and non recessed barrel.
    By DDgunworks17 in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 6
    Last Post: 03-16-2017, 04:12 AM
  3. Picked up two Bubba'ed Pattern 14 Rifles
    By fjruple in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 3
    Last Post: 11-13-2016, 08:06 PM
  4. Pattern 37 Bubba
    By Baal in forum Vintage Military Gear
    Replies: 3
    Last Post: 06-13-2016, 11:00 PM
  5. Eddystone Pattern 14
    By Mikesm44 in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 8
    Last Post: 02-11-2014, 01:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts