+ Reply to Thread
Results 1 to 3 of 3

Thread: Douvitis Mauser firing pin info needed

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member jessebogan's Avatar
    Join Date
    Feb 2013
    Last On
    Yesterday @ 04:01 PM
    Location
    rockville md
    Posts
    28
    Local Date
    11-18-2018
    Local Time
    11:06 AM

    Douvitis Mauser firing pin info needed

    I have an 1871 Uruguayan Mauser, rebuilt by St Entinne in 1891. When I got it the firing pin had been clipped. I was told to try getting a Steyr Kropatchneck (sp?) as it appeared to be similar.
    It was close, but no cigar...I gave the Steyr firing pin and my numbered original to my gunsmith buddy, and he duplicated the pin on the Steyr on my original. OK so far. What with one thing and another, a couple months slipped by. Now, when I assemble the bolt the firing pin appears to be much too long.
    If anyone out there owns one of these, could you measure the length of the pin from shoulder to the tip? And perhaps take a picture of the disassembled bolt? I am fairly sure I have assembled it correctly, but it has been a while...I am happy to shorten it if necessary, but I really need to know how long it needs to be. I suppose I could do it with overall length of the pin as well.
    Thanks for taking the time to help me out.
    Jesse

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Armory.Auctions LLC. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    Yesterday @ 03:38 PM
    Location
    Germany
    Posts
    4,567
    Local Date
    11-18-2018
    Local Time
    05:06 PM
    Perhaps you could post photos of the disassembled bolt? I am very familiar with the M1871 bolt, and the firing-pin protrusion is about 0.060". That is not a specification, just what my example happens to be. But other BPCRs in my possession are similar. And please measure the protrusion "as is". Phrases like "appears to be much too long" are no substitute for measurement.

    This is one of those cases where you must beware of the old motto - you can file it shorter, but if you go too far it's difficult to file it longer again. So let's see some photos first.
    Last edited by Patrick Chadwick; 11-01-2018 at 07:11 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Member jessebogan's Avatar
    Join Date
    Feb 2013
    Last On
    Yesterday @ 04:01 PM
    Location
    rockville md
    Posts
    28
    Local Date
    11-18-2018
    Local Time
    11:06 AM
    Thread Starter
    Grrrr. My wifi is not up to posting photos right this moment. Worse than dial up...
    All of my good tools are out in storage. It may be the other side of the weekend before I can access them. I measured the firing pin length overall (crudely) at 6 13/16 " (173.038 mm) The actual "pin" is 1.5", or(38.1 mm) Measured from the top of the shoulder to the tip.
    This closely approximates the Steyr firing pin.
    As it is now, I can't fit the bolt head to the bolt. If I place the bolt in the cocked position, I can slide the bolt head all the way on, but even then I have.030 protrusion.
    I will try to post pics after I figure out why the wifi is imitating dial up. Stay tuned.


+ Reply to Thread

Similar Threads

  1. Mauser C96 Wartime ( info needed lots of pics )
    By Blaser6br in forum Mauser Rifles
    Replies: 1
    Last Post: 07-07-2013, 01:00 PM
  2. Replies: 12
    Last Post: 08-23-2012, 12:58 AM
  3. Info needed on a Mauser broomhandle
    By clarkmilitaria in forum Other Military Service Pistols and Revolvers
    Replies: 5
    Last Post: 12-05-2011, 07:48 PM
  4. Info needed for 1908 Brazilian mauser
    By drae in forum Mauser Rifles
    Replies: 0
    Last Post: 10-08-2011, 05:53 PM
  5. Mauser Wehrmannsgewehr info needed
    By musketshooter in forum Mauser Rifles
    Replies: 1
    Last Post: 03-19-2010, 01:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts