-
Also see a couple M2 Disconnector plungers and springs.
Nice grab to add to any parts stash.
Charlie-Painter777
A Country Has No Greater Responsibility Than To Care For Those Who Served...
-
Thank You to painter777 For This Useful Post:
-
11-18-2018 03:07 PM
# ADS
Friends and Sponsors
-
Legacy Member
Originally Posted by
jbm
Thanks for all of the help from everyone on this barrel. Not that it matters but when I picked up this barrel from a local guy I got quite a few other parts with it and I know mostly what they are, I was curious about the date of the barrel and the barrel not being dated like most. Pretty much all of the parts I got from him are in the same condition, maybe not brand new but in excellent condition. Thanks again for all of the help and info.
I'd be interested in the flip sights. There are a couple of projects in the safe needing completion.
-
-
-
Legacy Member
I think its an original replacement barrel. This is because regular production barrels were Parkerized with the band and sight on. On an original barrel you see a 'white' strip when you move the barrel band, and if you take off the front sight it is very pronounced. In this case the intention would be for the armorer to install the band and sight already on the carbine on the replacement barrel - that is, if I'm correct
'Really Senior Member'
Especially since I started on the original Culver forum. That had to be about 1998.
-
Thank You to INLAND44 For This Useful Post:
-
I44,
Where would Parking over the threads, barrel skirt, chamber and stake marks on the piston nut come in to play?
Inland applied finish as a assembled barreled receiver... to include band and front sight... like you describe.
But WRA among others applied finish to these parts loose.
Replacement barrel assemblies were packed with band and frt sight installed.
Charlie-Painter777
A Country Has No Greater Responsibility Than To Care For Those Who Served...
-
Thank You to painter777 For This Useful Post:
-
Advisory Panel
Originally Posted by
painter777
Replacement barrel assemblies were packed with band and frt sight installed.
I'd never heard that before...
-
-
I should have been more clear,
They were stored post WWII after the big rebuild programs as complete assemblies. These Spare parts barrels were usually barrel assemblies, not a plain barrel only with gas piston and nut
I can't say All were, but many like the barrels we currently see being offered up for sale on Ebay from Norway
Charlie-Painter777
A Country Has No Greater Responsibility Than To Care For Those Who Served...
-
Thank You to painter777 For This Useful Post:
-
Legacy Member
The only maker who made barrels right after the end of the war was Winchester with a replacement barrel contract that I am aware of. Winchester being the storage area for government owned machinery for making carbines, then used IBM equipment to make barrels. None of these had sights or barrel bands on them when shipped out as replacements.
-
The Following 2 Members Say Thank You to Bruce McAskill For This Useful Post:
-
Hi Bruce,
Thx for the WRA information. I do remember the SA barrels near 1950~
It's the replacement barrel assemblies that went along with spare parts to our lend/lease allies that I've seen the barrels with T3 bands, frt sights and Pistons installed.
I'm also looking for my notes on who parked completed like Inland and who parked unassembled like WRA.
Can't find them....
Charlie-Painter777
A Country Has No Greater Responsibility Than To Care For Those Who Served...
-
-
I Apologize to the OP jbm for throwing off his topic.
CH-P777
Charlie-Painter777
A Country Has No Greater Responsibility Than To Care For Those Who Served...
-
-
Legacy Member
No apology needed, I enjoy learning as much as possible.
-